Networking Forums  

Go Back   Networking Forums > Networking Newsgroups > IBM PC Networking

Network card diagnostic utility?

Reply
 
Thread Tools Display Modes
  #1  
Old 07-18-2004, 01:53 AM
Default Network card diagnostic utility?



Is there any kind of utility out there that can run diagnostic tests on your
network card? Or better yet, is there an error log that can be turned on
within Windows 2000 that will allow you to view hardware error messages
coming from a network card? I'm suspecting that my motherboard ethernet is
going bad, but it could just as easily be a driver issue.

Yousuf Khan

--
Humans: contact me at ykhan at rogers dot com
Spambots: just reply to this email address ;-)




Yousuf Khan
Reply With Quote
  #2  
Old 07-18-2004, 02:18 PM
wesley
Guest
 
Posts: n/a
Default Re: Network card diagnostic utility?

On Sun, 18 Jul 2004 00:53:31 +0000, Yousuf Khan wrote:

> Is there any kind of utility out there that can run diagnostic tests on your
> network card? Or better yet, is there an error log that can be turned on
> within Windows 2000 that will allow you to view hardware error messages
> coming from a network card? I'm suspecting that my motherboard ethernet is
> going bad, but it could just as easily be a driver issue.
>
> Yousuf Khan


You might check with the manufacturer of NIC. I know 3Com used to have
software utilties available for some of their models.

Network cards do go bad from time to time. Since they are only $10 to $20
for a decent quality model these days, why put a lot of effort into
testing? Just replace the thing and be done with it.



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
Reply With Quote
  #3  
Old 07-18-2004, 04:06 PM
daytripper
Guest
 
Posts: n/a
Default Re: Network card diagnostic utility?

On Sun, 18 Jul 2004 08:18:28 -0500, wesley <(E-Mail Removed)> wrote:

>On Sun, 18 Jul 2004 00:53:31 +0000, Yousuf Khan wrote:
>
>> Is there any kind of utility out there that can run diagnostic tests on your
>> network card? Or better yet, is there an error log that can be turned on
>> within Windows 2000 that will allow you to view hardware error messages
>> coming from a network card? I'm suspecting that my motherboard ethernet is
>> going bad, but it could just as easily be a driver issue.
>>
>> Yousuf Khan

>
>You might check with the manufacturer of NIC. I know 3Com used to have
>software utilties available for some of their models.
>
>Network cards do go bad from time to time. Since they are only $10 to $20
>for a decent quality model these days, why put a lot of effort into
>testing? Just replace the thing and be done with it.


Someone obviously missed the "motherboard ethernet" statement...
Reply With Quote
  #4  
Old 07-18-2004, 04:36 PM
Yousuf Khan
Guest
 
Posts: n/a
Default Re: Network card diagnostic utility?

wesley wrote:
> Network cards do go bad from time to time. Since they are only $10 to
> $20 for a decent quality model these days, why put a lot of effort
> into testing? Just replace the thing and be done with it.


Yeah, but I'm not sure that there is anything wrong with the card at all, it
could be an OS problem or an application problem. The symptoms are that I
lose Internet connectivity randomly, even though the IP address still
exists. The solution has been to release and renew the IP address so far.
But it may happen while I'm not even around and who's going to fix it during
that time? So I'd like to see if there are any internal Windows logs that
might provide me with a clue to what to look for.

Yousuf Khan


Reply With Quote
  #5  
Old 07-19-2004, 11:42 PM
wesley
Guest
 
Posts: n/a
Default Re: Network card diagnostic utility?

On Sun, 18 Jul 2004 15:06:43 +0000, daytripper wrote:

> On Sun, 18 Jul 2004 08:18:28 -0500, wesley <(E-Mail Removed)> wrote:
>
>>On Sun, 18 Jul 2004 00:53:31 +0000, Yousuf Khan wrote:
>>
>>> Is there any kind of utility out there that can run diagnostic tests on your
>>> network card? Or better yet, is there an error log that can be turned on
>>> within Windows 2000 that will allow you to view hardware error messages
>>> coming from a network card? I'm suspecting that my motherboard ethernet is
>>> going bad, but it could just as easily be a driver issue.
>>>
>>> Yousuf Khan

>>
>>You might check with the manufacturer of NIC. I know 3Com used to have
>>software utilties available for some of their models.
>>
>>Network cards do go bad from time to time. Since they are only $10 to $20
>>for a decent quality model these days, why put a lot of effort into
>>testing? Just replace the thing and be done with it.

>
> Someone obviously missed the "motherboard ethernet" statement...


Unless you're out of PCI or ISA slots you can always add a card. That at
least gives the original poster an option as opposed to your
ever-so-helpful contribution.




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
Reply With Quote
  #6  
Old 07-20-2004, 01:02 AM
daytripper
Guest
 
Posts: n/a
Default Re: Network card diagnostic utility?

On Mon, 19 Jul 2004 17:42:42 -0500, wesley <(E-Mail Removed)> wrote:

>On Sun, 18 Jul 2004 15:06:43 +0000, daytripper wrote:
>
>> On Sun, 18 Jul 2004 08:18:28 -0500, wesley <(E-Mail Removed)> wrote:
>>
>>>On Sun, 18 Jul 2004 00:53:31 +0000, Yousuf Khan wrote:
>>>
>>>> Is there any kind of utility out there that can run diagnostic tests on your
>>>> network card? Or better yet, is there an error log that can be turned on
>>>> within Windows 2000 that will allow you to view hardware error messages
>>>> coming from a network card? I'm suspecting that my motherboard ethernet is
>>>> going bad, but it could just as easily be a driver issue.
>>>>
>>>> Yousuf Khan
>>>
>>>You might check with the manufacturer of NIC. I know 3Com used to have
>>>software utilties available for some of their models.
>>>
>>>Network cards do go bad from time to time. Since they are only $10 to $20
>>>for a decent quality model these days, why put a lot of effort into
>>>testing? Just replace the thing and be done with it.

>>
>> Someone obviously missed the "motherboard ethernet" statement...

>
>Unless you're out of PCI or ISA slots you can always add a card. That at
>least gives the original poster an option as opposed to your
>ever-so-helpful contribution.


lol
that's twice you've missed the point...

/daytripper (who bets this nitwit goes for that third strike ;-)
Reply With Quote
  #7  
Old 07-20-2004, 01:03 AM
Yousuf Khan
Guest
 
Posts: n/a
Default Re: Network card diagnostic utility?

wesley wrote:
> Unless you're out of PCI or ISA slots you can always add a card. That
> at least gives the original poster an option as opposed to your
> ever-so-helpful contribution.


Anyways, it's looking like it was an interaction with ZoneAlarm that was
causing my strange little problem. I've replaced with Sygate, let's see if
that helps things.

Yousuf Khan


Reply With Quote
  #8  
Old 07-20-2004, 04:07 AM
wesley
Guest
 
Posts: n/a
Default Re: Network card diagnostic utility?

On Tue, 20 Jul 2004 00:02:49 +0000, daytripper wrote:

> On Mon, 19 Jul 2004 17:42:42 -0500, wesley <(E-Mail Removed)>
> wrote:
>
>>On Sun, 18 Jul 2004 15:06:43 +0000, daytripper wrote:
>>
>>> On Sun, 18 Jul 2004 08:18:28 -0500, wesley <(E-Mail Removed)>
>>> wrote:
>>>
>>>>On Sun, 18 Jul 2004 00:53:31 +0000, Yousuf Khan wrote:
>>>>
>>>>> Is there any kind of utility out there that can run diagnostic tests
>>>>> on your network card? Or better yet, is there an error log that can
>>>>> be turned on within Windows 2000 that will allow you to view
>>>>> hardware error messages coming from a network card? I'm suspecting
>>>>> that my motherboard ethernet is going bad, but it could just as
>>>>> easily be a driver issue.
>>>>>
>>>>> Yousuf Khan
>>>>
>>>>You might check with the manufacturer of NIC. I know 3Com used to have
>>>>software utilties available for some of their models.
>>>>
>>>>Network cards do go bad from time to time. Since they are only $10 to
>>>>$20 for a decent quality model these days, why put a lot of effort
>>>>into testing? Just replace the thing and be done with it.
>>>
>>> Someone obviously missed the "motherboard ethernet" statement...

>>
>>Unless you're out of PCI or ISA slots you can always add a card. That at
>>least gives the original poster an option as opposed to your
>>ever-so-helpful contribution.

>
> lol
> that's twice you've missed the point...
>
> /daytripper (who bets this nitwit goes for that third strike ;-)


And your solution was exactly what? Replace the whole motherboard had the
network chip been gimpy? The only "bet" you won here was the 2004
pusillanimity award for snide irrelevancy.

However, glad to see the original poster found the problem on his own.



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
Reply With Quote
  #9  
Old 07-20-2004, 04:09 AM
daytripper
Guest
 
Posts: n/a
Default Re: Network card diagnostic utility?

On Mon, 19 Jul 2004 22:07:03 -0500, wesley <(E-Mail Removed)> wrote:

>On Tue, 20 Jul 2004 00:02:49 +0000, daytripper wrote:
>
>> On Mon, 19 Jul 2004 17:42:42 -0500, wesley <(E-Mail Removed)>
>> wrote:
>>
>>>On Sun, 18 Jul 2004 15:06:43 +0000, daytripper wrote:
>>>
>>>> On Sun, 18 Jul 2004 08:18:28 -0500, wesley <(E-Mail Removed)>
>>>> wrote:
>>>>
>>>>>On Sun, 18 Jul 2004 00:53:31 +0000, Yousuf Khan wrote:
>>>>>
>>>>>> Is there any kind of utility out there that can run diagnostic tests
>>>>>> on your network card? Or better yet, is there an error log that can
>>>>>> be turned on within Windows 2000 that will allow you to view
>>>>>> hardware error messages coming from a network card? I'm suspecting
>>>>>> that my motherboard ethernet is going bad, but it could just as
>>>>>> easily be a driver issue.
>>>>>>
>>>>>> Yousuf Khan
>>>>>
>>>>>You might check with the manufacturer of NIC. I know 3Com used to have
>>>>>software utilties available for some of their models.
>>>>>
>>>>>Network cards do go bad from time to time. Since they are only $10 to
>>>>>$20 for a decent quality model these days, why put a lot of effort
>>>>>into testing? Just replace the thing and be done with it.
>>>>
>>>> Someone obviously missed the "motherboard ethernet" statement...
>>>
>>>Unless you're out of PCI or ISA slots you can always add a card. That at
>>>least gives the original poster an option as opposed to your
>>>ever-so-helpful contribution.

>>
>> lol
>> that's twice you've missed the point...
>>
>> /daytripper (who bets this nitwit goes for that third strike ;-)

>
>And your solution was exactly what? Replace the whole motherboard had the
>network chip been gimpy? The only "bet" you won here was the 2004
>pusillanimity award for snide irrelevancy.
>
>However, glad to see the original poster found the problem on his own.


[.../]

*snicker*
Reply With Quote
Reply

Tags
card, diagnostic, network, utility

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 05:01 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.