PXE boot from a RIS server

I have installed a RIS server and have a DHCP server running now with a few
IP's for it. I have th server ruuning and when I go to boot from PXE (from
the network card) it starts to boot from there but than gives me this error.
'No DHCP or ProxyDHCP offers made"
Any ideas?
Thanks


rocker40

Hello,

any eventlog on the dhcp/ris server ?
Is the RIS server multihomed ?
Did you authorize the RIS in AD ?

How To Use Remote Installation Service to Install Windows Server 2003 on
Remote Computers
http://support.microsoft.com/kb/325862/en-us

Description of PXE Interaction Among PXE Client, DHCP, and RIS Server
http://support.microsoft.com/kb/244036/en-us




--
Cordialement,
Mathieu CHATEAU
English blog: http://lordoftheping.blogspot.com
French blog: http://www.lotp.fr


"rocker40" <(E-Mail Removed)> wrote in message
news:123CA233-CC1D-4B07-A68C-(E-Mail Removed)...
>I have installed a RIS server and have a DHCP server running now with a few
> IP's for it. I have th server ruuning and when I go to boot from PXE (from
> the network card) it starts to boot from there but than gives me this
> error.
> 'No DHCP or ProxyDHCP offers made"
> Any ideas?
> Thanks

Actually I got the DHCP to work I think. My media was bad. but now the next
step it is saying "no boot filename received" I created the RIS and it
created the shared file and boot folder I think. I created it using the
instructions from the same link you sent me.
Any ideas?

"Mathieu CHATEAU" wrote:

> Hello,
>
> any eventlog on the dhcp/ris server ?
> Is the RIS server multihomed ?
> Did you authorize the RIS in AD ?
>
> How To Use Remote Installation Service to Install Windows Server 2003 on
> Remote Computers
> http://support.microsoft.com/kb/325862/en-us
>
> Description of PXE Interaction Among PXE Client, DHCP, and RIS Server
> http://support.microsoft.com/kb/244036/en-us
>
>
>
>
> --
> Cordialement,
> Mathieu CHATEAU
> English blog: http://lordoftheping.blogspot.com
> French blog: http://www.lotp.fr
>
>
> "rocker40" <(E-Mail Removed)> wrote in message
> news:123CA233-CC1D-4B07-A68C-(E-Mail Removed)...
> >I have installed a RIS server and have a DHCP server running now with a few
> > IP's for it. I have th server ruuning and when I go to boot from PXE (from
> > the network card) it starts to boot from there but than gives me this
> > error.
> > 'No DHCP or ProxyDHCP offers made"
> > Any ideas?
> > Thanks
>
>

you may check this:

PXE clients computers do not start when you configure the Dynamic Host
Configuration Protocol server to use options 60, 66, 67
http://support.microsoft.com/kb/259670/en-us


--
Cordialement,
Mathieu CHATEAU
English blog: http://lordoftheping.blogspot.com
French blog: http://www.lotp.fr


"rocker40" <(E-Mail Removed)> wrote in message
news:3096590E-C3D1-41EA-889F-(E-Mail Removed)...
> Actually I got the DHCP to work I think. My media was bad. but now the
> next
> step it is saying "no boot filename received" I created the RIS and it
> created the shared file and boot folder I think. I created it using the
> instructions from the same link you sent me.
> Any ideas?
>
> "Mathieu CHATEAU" wrote:
>
>> Hello,
>>
>> any eventlog on the dhcp/ris server ?
>> Is the RIS server multihomed ?
>> Did you authorize the RIS in AD ?
>>
>> How To Use Remote Installation Service to Install Windows Server 2003 on
>> Remote Computers
>> http://support.microsoft.com/kb/325862/en-us
>>
>> Description of PXE Interaction Among PXE Client, DHCP, and RIS Server
>> http://support.microsoft.com/kb/244036/en-us
>>
>>
>>
>>
>> --
>> Cordialement,
>> Mathieu CHATEAU
>> English blog: http://lordoftheping.blogspot.com
>> French blog: http://www.lotp.fr
>>
>>
>> "rocker40" <(E-Mail Removed)> wrote in message
>> news:123CA233-CC1D-4B07-A68C-(E-Mail Removed)...
>> >I have installed a RIS server and have a DHCP server running now with a
>> >few
>> > IP's for it. I have th server ruuning and when I go to boot from PXE
>> > (from
>> > the network card) it starts to boot from there but than gives me this
>> > error.
>> > 'No DHCP or ProxyDHCP offers made"
>> > Any ideas?
>> > Thanks
>>
>>

I do not have option 60 to choose from. i found that answer somewhere else
also and it said something about reinstalling it from a RDP cd if if it
wasn't there. How do I get option 60?
"Mathieu CHATEAU" wrote:

> you may check this:
>
> PXE clients computers do not start when you configure the Dynamic Host
> Configuration Protocol server to use options 60, 66, 67
> http://support.microsoft.com/kb/259670/en-us
>
>
> --
> Cordialement,
> Mathieu CHATEAU
> English blog: http://lordoftheping.blogspot.com
> French blog: http://www.lotp.fr
>
>
> "rocker40" <(E-Mail Removed)> wrote in message
> news:3096590E-C3D1-41EA-889F-(E-Mail Removed)...
> > Actually I got the DHCP to work I think. My media was bad. but now the
> > next
> > step it is saying "no boot filename received" I created the RIS and it
> > created the shared file and boot folder I think. I created it using the
> > instructions from the same link you sent me.
> > Any ideas?
> >
> > "Mathieu CHATEAU" wrote:
> >
> >> Hello,
> >>
> >> any eventlog on the dhcp/ris server ?
> >> Is the RIS server multihomed ?
> >> Did you authorize the RIS in AD ?
> >>
> >> How To Use Remote Installation Service to Install Windows Server 2003 on
> >> Remote Computers
> >> http://support.microsoft.com/kb/325862/en-us
> >>
> >> Description of PXE Interaction Among PXE Client, DHCP, and RIS Server
> >> http://support.microsoft.com/kb/244036/en-us
> >>
> >>
> >>
> >>
> >> --
> >> Cordialement,
> >> Mathieu CHATEAU
> >> English blog: http://lordoftheping.blogspot.com
> >> French blog: http://www.lotp.fr
> >>
> >>
> >> "rocker40" <(E-Mail Removed)> wrote in message
> >> news:123CA233-CC1D-4B07-A68C-(E-Mail Removed)...
> >> >I have installed a RIS server and have a DHCP server running now with a
> >> >few
> >> > IP's for it. I have th server ruuning and when I go to boot from PXE
> >> > (from
> >> > the network card) it starts to boot from there but than gives me this
> >> > error.
> >> > 'No DHCP or ProxyDHCP offers made"
> >> > Any ideas?
> >> > Thanks
> >>
> >>
>
>

Hello,

check that you followed this way:
How To Set Up and Configure Remote Installation Services in Windows 2000
http://support.microsoft.com/kb/298750/en-us

Else uninstall and install again following this step by step. You may found
other more detailed tutorial through search engine.
--
Cordialement,
Mathieu CHATEAU
English blog: http://lordoftheping.blogspot.com
French blog: http://www.lotp.fr


"rocker40" <(E-Mail Removed)> wrote in message
news:A9D0730D-15AF-416A-8DB5-(E-Mail Removed)...
>
> I do not have option 60 to choose from. i found that answer somewhere else
> also and it said something about reinstalling it from a RDP cd if if it
> wasn't there. How do I get option 60?
> "Mathieu CHATEAU" wrote:
>
>> you may check this:
>>
>> PXE clients computers do not start when you configure the Dynamic Host
>> Configuration Protocol server to use options 60, 66, 67
>> http://support.microsoft.com/kb/259670/en-us
>>
>>
>> --
>> Cordialement,
>> Mathieu CHATEAU
>> English blog: http://lordoftheping.blogspot.com
>> French blog: http://www.lotp.fr
>>
>>
>> "rocker40" <(E-Mail Removed)> wrote in message
>> news:3096590E-C3D1-41EA-889F-(E-Mail Removed)...
>> > Actually I got the DHCP to work I think. My media was bad. but now the
>> > next
>> > step it is saying "no boot filename received" I created the RIS and it
>> > created the shared file and boot folder I think. I created it using
>> > the
>> > instructions from the same link you sent me.
>> > Any ideas?
>> >
>> > "Mathieu CHATEAU" wrote:
>> >
>> >> Hello,
>> >>
>> >> any eventlog on the dhcp/ris server ?
>> >> Is the RIS server multihomed ?
>> >> Did you authorize the RIS in AD ?
>> >>
>> >> How To Use Remote Installation Service to Install Windows Server 2003
>> >> on
>> >> Remote Computers
>> >> http://support.microsoft.com/kb/325862/en-us
>> >>
>> >> Description of PXE Interaction Among PXE Client, DHCP, and RIS Server
>> >> http://support.microsoft.com/kb/244036/en-us
>> >>
>> >>
>> >>
>> >>
>> >> --
>> >> Cordialement,
>> >> Mathieu CHATEAU
>> >> English blog: http://lordoftheping.blogspot.com
>> >> French blog: http://www.lotp.fr
>> >>
>> >>
>> >> "rocker40" <(E-Mail Removed)> wrote in message
>> >> news:123CA233-CC1D-4B07-A68C-(E-Mail Removed)...
>> >> >I have installed a RIS server and have a DHCP server running now with
>> >> >a
>> >> >few
>> >> > IP's for it. I have th server ruuning and when I go to boot from PXE
>> >> > (from
>> >> > the network card) it starts to boot from there but than gives me
>> >> > this
>> >> > error.
>> >> > 'No DHCP or ProxyDHCP offers made"
>> >> > Any ideas?
>> >> > Thanks
>> >>
>> >>
>>
>>

Actually according to the microsoft article you sent those options should not
be configured if the server is the same as the DHCP server. So those options
were not configured on mine wich is right as the RIS is the same server as
DHCP.
This is the article I used to install. Do you what files should be in the
remote install folder?
Also I found this in the instructions "
RIS supports only the remote installation of Windows 2000 Professional. "

I am tring to install server2003 is this a problem?


"Mathieu CHATEAU" wrote:

> Hello,
>
> check that you followed this way:
> How To Set Up and Configure Remote Installation Services in Windows 2000
> http://support.microsoft.com/kb/298750/en-us
>
> Else uninstall and install again following this step by step. You may found
> other more detailed tutorial through search engine.
> --
> Cordialement,
> Mathieu CHATEAU
> English blog: http://lordoftheping.blogspot.com
> French blog: http://www.lotp.fr
>
>
> "rocker40" <(E-Mail Removed)> wrote in message
> news:A9D0730D-15AF-416A-8DB5-(E-Mail Removed)...
> >
> > I do not have option 60 to choose from. i found that answer somewhere else
> > also and it said something about reinstalling it from a RDP cd if if it
> > wasn't there. How do I get option 60?
> > "Mathieu CHATEAU" wrote:
> >
> >> you may check this:
> >>
> >> PXE clients computers do not start when you configure the Dynamic Host
> >> Configuration Protocol server to use options 60, 66, 67
> >> http://support.microsoft.com/kb/259670/en-us
> >>
> >>
> >> --
> >> Cordialement,
> >> Mathieu CHATEAU
> >> English blog: http://lordoftheping.blogspot.com
> >> French blog: http://www.lotp.fr
> >>
> >>
> >> "rocker40" <(E-Mail Removed)> wrote in message
> >> news:3096590E-C3D1-41EA-889F-(E-Mail Removed)...
> >> > Actually I got the DHCP to work I think. My media was bad. but now the
> >> > next
> >> > step it is saying "no boot filename received" I created the RIS and it
> >> > created the shared file and boot folder I think. I created it using
> >> > the
> >> > instructions from the same link you sent me.
> >> > Any ideas?
> >> >
> >> > "Mathieu CHATEAU" wrote:
> >> >
> >> >> Hello,
> >> >>
> >> >> any eventlog on the dhcp/ris server ?
> >> >> Is the RIS server multihomed ?
> >> >> Did you authorize the RIS in AD ?
> >> >>
> >> >> How To Use Remote Installation Service to Install Windows Server 2003
> >> >> on
> >> >> Remote Computers
> >> >> http://support.microsoft.com/kb/325862/en-us
> >> >>
> >> >> Description of PXE Interaction Among PXE Client, DHCP, and RIS Server
> >> >> http://support.microsoft.com/kb/244036/en-us
> >> >>
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> Cordialement,
> >> >> Mathieu CHATEAU
> >> >> English blog: http://lordoftheping.blogspot.com
> >> >> French blog: http://www.lotp.fr
> >> >>
> >> >>
> >> >> "rocker40" <(E-Mail Removed)> wrote in message
> >> >> news:123CA233-CC1D-4B07-A68C-(E-Mail Removed)...
> >> >> >I have installed a RIS server and have a DHCP server running now with
> >> >> >a
> >> >> >few
> >> >> > IP's for it. I have th server ruuning and when I go to boot from PXE
> >> >> > (from
> >> >> > the network card) it starts to boot from there but than gives me
> >> >> > this
> >> >> > error.
> >> >> > 'No DHCP or ProxyDHCP offers made"
> >> >> > Any ideas?
> >> >> > Thanks
> >> >>
> >> >>
> >>
> >>
>
>

About W2K3, the main problem is that you can only build one partition.

I wouldn't use RIS for servers, but the new WIM image (require SP2 to
upgrade RIS)

--
Cordialement,
Mathieu CHATEAU
English blog: http://lordoftheping.blogspot.com
French blog: http://www.lotp.fr


"rocker40" <(E-Mail Removed)> wrote in message
news:B7C32C91-2D1F-4003-A872-(E-Mail Removed)...
> Actually according to the microsoft article you sent those options should
> not
> be configured if the server is the same as the DHCP server. So those
> options
> were not configured on mine wich is right as the RIS is the same server as
> DHCP.
> This is the article I used to install. Do you what files should be in the
> remote install folder?
> Also I found this in the instructions "
> RIS supports only the remote installation of Windows 2000 Professional. "
>
> I am tring to install server2003 is this a problem?
>
>
> "Mathieu CHATEAU" wrote:
>
>> Hello,
>>
>> check that you followed this way:
>> How To Set Up and Configure Remote Installation Services in Windows 2000
>> http://support.microsoft.com/kb/298750/en-us
>>
>> Else uninstall and install again following this step by step. You may
>> found
>> other more detailed tutorial through search engine.
>> --
>> Cordialement,
>> Mathieu CHATEAU
>> English blog: http://lordoftheping.blogspot.com
>> French blog: http://www.lotp.fr
>>
>>
>> "rocker40" <(E-Mail Removed)> wrote in message
>> news:A9D0730D-15AF-416A-8DB5-(E-Mail Removed)...
>> >
>> > I do not have option 60 to choose from. i found that answer somewhere
>> > else
>> > also and it said something about reinstalling it from a RDP cd if if it
>> > wasn't there. How do I get option 60?
>> > "Mathieu CHATEAU" wrote:
>> >
>> >> you may check this:
>> >>
>> >> PXE clients computers do not start when you configure the Dynamic Host
>> >> Configuration Protocol server to use options 60, 66, 67
>> >> http://support.microsoft.com/kb/259670/en-us
>> >>
>> >>
>> >> --
>> >> Cordialement,
>> >> Mathieu CHATEAU
>> >> English blog: http://lordoftheping.blogspot.com
>> >> French blog: http://www.lotp.fr
>> >>
>> >>
>> >> "rocker40" <(E-Mail Removed)> wrote in message
>> >> news:3096590E-C3D1-41EA-889F-(E-Mail Removed)...
>> >> > Actually I got the DHCP to work I think. My media was bad. but now
>> >> > the
>> >> > next
>> >> > step it is saying "no boot filename received" I created the RIS and
>> >> > it
>> >> > created the shared file and boot folder I think. I created it using
>> >> > the
>> >> > instructions from the same link you sent me.
>> >> > Any ideas?
>> >> >
>> >> > "Mathieu CHATEAU" wrote:
>> >> >
>> >> >> Hello,
>> >> >>
>> >> >> any eventlog on the dhcp/ris server ?
>> >> >> Is the RIS server multihomed ?
>> >> >> Did you authorize the RIS in AD ?
>> >> >>
>> >> >> How To Use Remote Installation Service to Install Windows Server
>> >> >> 2003
>> >> >> on
>> >> >> Remote Computers
>> >> >> http://support.microsoft.com/kb/325862/en-us
>> >> >>
>> >> >> Description of PXE Interaction Among PXE Client, DHCP, and RIS
>> >> >> Server
>> >> >> http://support.microsoft.com/kb/244036/en-us
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >> --
>> >> >> Cordialement,
>> >> >> Mathieu CHATEAU
>> >> >> English blog: http://lordoftheping.blogspot.com
>> >> >> French blog: http://www.lotp.fr
>> >> >>
>> >> >>
>> >> >> "rocker40" <(E-Mail Removed)> wrote in message
>> >> >> news:123CA233-CC1D-4B07-A68C-(E-Mail Removed)...
>> >> >> >I have installed a RIS server and have a DHCP server running now
>> >> >> >with
>> >> >> >a
>> >> >> >few
>> >> >> > IP's for it. I have th server ruuning and when I go to boot from
>> >> >> > PXE
>> >> >> > (from
>> >> >> > the network card) it starts to boot from there but than gives me
>> >> >> > this
>> >> >> > error.
>> >> >> > 'No DHCP or ProxyDHCP offers made"
>> >> >> > Any ideas?
>> >> >> > Thanks
>> >> >>
>> >> >>
>> >>
>> >>
>>
>>

I do have service pak2 on the server I am using. I have no other choice to
load this server as it is a NAS server from IOMEGA and it has no cdrom or USB
port or Floppy But I should be able to load it this way right?

"Mathieu CHATEAU" wrote:

> About W2K3, the main problem is that you can only build one partition.
>
> I wouldn't use RIS for servers, but the new WIM image (require SP2 to
> upgrade RIS)
>
> --
> Cordialement,
> Mathieu CHATEAU
> English blog: http://lordoftheping.blogspot.com
> French blog: http://www.lotp.fr
>
>
> "rocker40" <(E-Mail Removed)> wrote in message
> news:B7C32C91-2D1F-4003-A872-(E-Mail Removed)...
> > Actually according to the microsoft article you sent those options should
> > not
> > be configured if the server is the same as the DHCP server. So those
> > options
> > were not configured on mine wich is right as the RIS is the same server as
> > DHCP.
> > This is the article I used to install. Do you what files should be in the
> > remote install folder?
> > Also I found this in the instructions "
> > RIS supports only the remote installation of Windows 2000 Professional. "
> >
> > I am tring to install server2003 is this a problem?
> >
> >
> > "Mathieu CHATEAU" wrote:
> >
> >> Hello,
> >>
> >> check that you followed this way:
> >> How To Set Up and Configure Remote Installation Services in Windows 2000
> >> http://support.microsoft.com/kb/298750/en-us
> >>
> >> Else uninstall and install again following this step by step. You may
> >> found
> >> other more detailed tutorial through search engine.
> >> --
> >> Cordialement,
> >> Mathieu CHATEAU
> >> English blog: http://lordoftheping.blogspot.com
> >> French blog: http://www.lotp.fr
> >>
> >>
> >> "rocker40" <(E-Mail Removed)> wrote in message
> >> news:A9D0730D-15AF-416A-8DB5-(E-Mail Removed)...
> >> >
> >> > I do not have option 60 to choose from. i found that answer somewhere
> >> > else
> >> > also and it said something about reinstalling it from a RDP cd if if it
> >> > wasn't there. How do I get option 60?
> >> > "Mathieu CHATEAU" wrote:
> >> >
> >> >> you may check this:
> >> >>
> >> >> PXE clients computers do not start when you configure the Dynamic Host
> >> >> Configuration Protocol server to use options 60, 66, 67
> >> >> http://support.microsoft.com/kb/259670/en-us
> >> >>
> >> >>
> >> >> --
> >> >> Cordialement,
> >> >> Mathieu CHATEAU
> >> >> English blog: http://lordoftheping.blogspot.com
> >> >> French blog: http://www.lotp.fr
> >> >>
> >> >>
> >> >> "rocker40" <(E-Mail Removed)> wrote in message
> >> >> news:3096590E-C3D1-41EA-889F-(E-Mail Removed)...
> >> >> > Actually I got the DHCP to work I think. My media was bad. but now
> >> >> > the
> >> >> > next
> >> >> > step it is saying "no boot filename received" I created the RIS and
> >> >> > it
> >> >> > created the shared file and boot folder I think. I created it using
> >> >> > the
> >> >> > instructions from the same link you sent me.
> >> >> > Any ideas?
> >> >> >
> >> >> > "Mathieu CHATEAU" wrote:
> >> >> >
> >> >> >> Hello,
> >> >> >>
> >> >> >> any eventlog on the dhcp/ris server ?
> >> >> >> Is the RIS server multihomed ?
> >> >> >> Did you authorize the RIS in AD ?
> >> >> >>
> >> >> >> How To Use Remote Installation Service to Install Windows Server
> >> >> >> 2003
> >> >> >> on
> >> >> >> Remote Computers
> >> >> >> http://support.microsoft.com/kb/325862/en-us
> >> >> >>
> >> >> >> Description of PXE Interaction Among PXE Client, DHCP, and RIS
> >> >> >> Server
> >> >> >> http://support.microsoft.com/kb/244036/en-us
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> --
> >> >> >> Cordialement,
> >> >> >> Mathieu CHATEAU
> >> >> >> English blog: http://lordoftheping.blogspot.com
> >> >> >> French blog: http://www.lotp.fr
> >> >> >>
> >> >> >>
> >> >> >> "rocker40" <(E-Mail Removed)> wrote in message
> >> >> >> news:123CA233-CC1D-4B07-A68C-(E-Mail Removed)...
> >> >> >> >I have installed a RIS server and have a DHCP server running now
> >> >> >> >with
> >> >> >> >a
> >> >> >> >few
> >> >> >> > IP's for it. I have th server ruuning and when I go to boot from
> >> >> >> > PXE
> >> >> >> > (from
> >> >> >> > the network card) it starts to boot from there but than gives me
> >> >> >> > this
> >> >> >> > error.
> >> >> >> > 'No DHCP or ProxyDHCP offers made"
> >> >> >> > Any ideas?
> >> >> >> > Thanks
> >> >> >>
> >> >> >>
> >> >>
> >> >>
> >>
> >>
>
>

WIM is just a new format for delivering OS. It can be deployed through the
network as RIS, but the image server must be running W2K3 SP2 to be able to
deliver in wim format.


--
Cordialement,
Mathieu CHATEAU
English blog: http://lordoftheping.blogspot.com
French blog: http://www.lotp.fr


"rocker40" <(E-Mail Removed)> wrote in message
news:151015D0-2AD6-40D8-9377-(E-Mail Removed)...
>I do have service pak2 on the server I am using. I have no other choice to
> load this server as it is a NAS server from IOMEGA and it has no cdrom or
> USB
> port or Floppy But I should be able to load it this way right?
>
> "Mathieu CHATEAU" wrote:
>
>> About W2K3, the main problem is that you can only build one partition.
>>
>> I wouldn't use RIS for servers, but the new WIM image (require SP2 to
>> upgrade RIS)
>>
>> --
>> Cordialement,
>> Mathieu CHATEAU
>> English blog: http://lordoftheping.blogspot.com
>> French blog: http://www.lotp.fr
>>
>>
>> "rocker40" <(E-Mail Removed)> wrote in message
>> news:B7C32C91-2D1F-4003-A872-(E-Mail Removed)...
>> > Actually according to the microsoft article you sent those options
>> > should
>> > not
>> > be configured if the server is the same as the DHCP server. So those
>> > options
>> > were not configured on mine wich is right as the RIS is the same server
>> > as
>> > DHCP.
>> > This is the article I used to install. Do you what files should be in
>> > the
>> > remote install folder?
>> > Also I found this in the instructions "
>> > RIS supports only the remote installation of Windows 2000 Professional.
>> > "
>> >
>> > I am tring to install server2003 is this a problem?
>> >
>> >
>> > "Mathieu CHATEAU" wrote:
>> >
>> >> Hello,
>> >>
>> >> check that you followed this way:
>> >> How To Set Up and Configure Remote Installation Services in Windows
>> >> 2000
>> >> http://support.microsoft.com/kb/298750/en-us
>> >>
>> >> Else uninstall and install again following this step by step. You may
>> >> found
>> >> other more detailed tutorial through search engine.
>> >> --
>> >> Cordialement,
>> >> Mathieu CHATEAU
>> >> English blog: http://lordoftheping.blogspot.com
>> >> French blog: http://www.lotp.fr
>> >>
>> >>
>> >> "rocker40" <(E-Mail Removed)> wrote in message
>> >> news:A9D0730D-15AF-416A-8DB5-(E-Mail Removed)...
>> >> >
>> >> > I do not have option 60 to choose from. i found that answer
>> >> > somewhere
>> >> > else
>> >> > also and it said something about reinstalling it from a RDP cd if if
>> >> > it
>> >> > wasn't there. How do I get option 60?
>> >> > "Mathieu CHATEAU" wrote:
>> >> >
>> >> >> you may check this:
>> >> >>
>> >> >> PXE clients computers do not start when you configure the Dynamic
>> >> >> Host
>> >> >> Configuration Protocol server to use options 60, 66, 67
>> >> >> http://support.microsoft.com/kb/259670/en-us
>> >> >>
>> >> >>
>> >> >> --
>> >> >> Cordialement,
>> >> >> Mathieu CHATEAU
>> >> >> English blog: http://lordoftheping.blogspot.com
>> >> >> French blog: http://www.lotp.fr
>> >> >>
>> >> >>
>> >> >> "rocker40" <(E-Mail Removed)> wrote in message
>> >> >> news:3096590E-C3D1-41EA-889F-(E-Mail Removed)...
>> >> >> > Actually I got the DHCP to work I think. My media was bad. but
>> >> >> > now
>> >> >> > the
>> >> >> > next
>> >> >> > step it is saying "no boot filename received" I created the RIS
>> >> >> > and
>> >> >> > it
>> >> >> > created the shared file and boot folder I think. I created it
>> >> >> > using
>> >> >> > the
>> >> >> > instructions from the same link you sent me.
>> >> >> > Any ideas?
>> >> >> >
>> >> >> > "Mathieu CHATEAU" wrote:
>> >> >> >
>> >> >> >> Hello,
>> >> >> >>
>> >> >> >> any eventlog on the dhcp/ris server ?
>> >> >> >> Is the RIS server multihomed ?
>> >> >> >> Did you authorize the RIS in AD ?
>> >> >> >>
>> >> >> >> How To Use Remote Installation Service to Install Windows Server
>> >> >> >> 2003
>> >> >> >> on
>> >> >> >> Remote Computers
>> >> >> >> http://support.microsoft.com/kb/325862/en-us
>> >> >> >>
>> >> >> >> Description of PXE Interaction Among PXE Client, DHCP, and RIS
>> >> >> >> Server
>> >> >> >> http://support.microsoft.com/kb/244036/en-us
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> --
>> >> >> >> Cordialement,
>> >> >> >> Mathieu CHATEAU
>> >> >> >> English blog: http://lordoftheping.blogspot.com
>> >> >> >> French blog: http://www.lotp.fr
>> >> >> >>
>> >> >> >>
>> >> >> >> "rocker40" <(E-Mail Removed)> wrote in message
>> >> >> >> news:123CA233-CC1D-4B07-A68C-(E-Mail Removed)...
>> >> >> >> >I have installed a RIS server and have a DHCP server running
>> >> >> >> >now
>> >> >> >> >with
>> >> >> >> >a
>> >> >> >> >few
>> >> >> >> > IP's for it. I have th server ruuning and when I go to boot
>> >> >> >> > from
>> >> >> >> > PXE
>> >> >> >> > (from
>> >> >> >> > the network card) it starts to boot from there but than gives
>> >> >> >> > me
>> >> >> >> > this
>> >> >> >> > error.
>> >> >> >> > 'No DHCP or ProxyDHCP offers made"
>> >> >> >> > Any ideas?
>> >> >> >> > Thanks
>> >> >> >>
>> >> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>>
>>