|
||||||||
|
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
|
Already have the wireless/router to 'auto scan' for best channel.
Router is DLink DI-614+ Card is Dlink DWL 520+ The signal Does connect but only for 30 seconds, then drops out for 1 minute, like a cycle. It never works all the time. What could be causing this and how can I fix it? thanks Crackles McFarly |
|
#2
|
|||
|
|||
|
"Crackles McFarly" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)... > Already have the wireless/router to 'auto scan' for best channel. > > Router is DLink DI-614+ > Card is Dlink DWL 520+ > > The signal Does connect but only for 30 seconds, then drops out for 1 > minute, like a cycle. It never works all the time. > > What could be causing this and how can I fix it? > > thanks > i may be misunderstanding, but the router shoud be transmitting on a fixed channel, ie ch2, or ch5 etc, and the card should then be able to connect on that channel, by autoscanning for best channel i guess that youre constantly dropping the connection to go looking for a better one. sure someone will correct me if i'm wrong |
![]() |
| Tags |
| connection, wireless |
| Thread Tools | |
| Display Modes | |
|
|