Senao AP melting inside

This can't be good at all, the funny thing is that the AP is working
OK.

I discovered this while cleaning my room last weekend, when I picked up
the senao, it was draining some kind of sticky oil, and looking throught
the plastic cover on the front, I can see white "glue" melted all
around.

Should I contact Senao before my house becames a nuclear hazard?

[image: http://img220.imageshack.us/img220/5...cel148ob2.jpg]


------------------------------------------------------------------------
View this thread: http://www.wirelessforums.org/showthread.php?t=31771
http://www.wirelessforums.org



D4rK_Pr1nC3

D4rK_Pr1nC3 <(E-Mail Removed)> hath wroth:

>This can't be good at all, the funny thing is that the AP is working
>OK.

Don't worry. It will fail when you need it the most.

>I discovered this while cleaning my room last weekend, when I picked up
>the senao, it was draining some kind of sticky oil, and looking throught
>the plastic cover on the front, I can see white "glue" melted all
>around.

Routers are not normally made with any liquids inside. There's some
liquid electrolyte in the electrolytic capacitors, but that's brown
colored. White or clear could be hot melt glue. Are you sure that
something else in your apparently messy room didn't drain *INTO* the
Senao AP?

>Should I contact Senao before my house becames a nuclear hazard?

Yeah. Calling support would give them a welcome change from the usual
questions found in the FAQ. It's not often one gets a call about a
leaky access point or nuclear meltdown.

>[image: http://img220.imageshack.us/img220/5...cel148ob2.jpg]

Cell phone camera? Extracting the EXIF info.... Yep. Nokia 6131
That photo is as bad or worse than my cell phone camera. Get a real
digital camera.

I guess you mean the blue glow behind the front panel. Kinda looks
some of the slime left behind from various insect egg cases, but
there's way too much. Just open it up and see what it is. Also check
if something in your mess didn't pour *INTO* the access point.

--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

midjet wrote:




Have one just like it. Same leaking white goo. Senao Support said it
was a piece of foam tape that was breaking down from processor heat.
Messy, but of no consequence.