Root domain controller and network connectivity

During installation for Windows Server 2003 Std, do you have to specify that
Server 2003 should be joining a domain for network connectivity to work? I
don't have a domain. This installation of Server 2003 would be my root domain
controller. Do I still have to specify the root domain as the domain for
Server 2003 to join during installation for network connectivity to work?

My problem is that I did not specify a domain during installation and now
there's no network connectivity.

Thanks.



JJ

Hello JJ,

During the 2003 first install you don't have to. The machine will be installed
with the server operating system and after that you can install the thinigs
you like. A domain will be created when you run dcpromo from the run line
and then it will ask you for the domainname etc.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.

> During installation for Windows Server 2003 Std, do you have to
> specify that Server 2003 should be joining a domain for network
> connectivity to work? I don't have a domain. This installation of
> Server 2003 would be my root domain controller. Do I still have to
> specify the root domain as the domain for Server 2003 to join during
> installation for network connectivity to work?
>
> My problem is that I did not specify a domain during installation and
> now there's no network connectivity.
>
> Thanks.
>

Then why don't I have network connectivity? Here's my setup:

1. Windows Vista 64-bit on the bare metal.
2. Virtual Server 2005 R2 SP1 64-bit on top of Vista
3. Windows Server 2003 Std on top of a Virtual Server VM.

I have a virtual network configured in Virtual Server with my active NIC
that has an Internet connection assigned to that virtual network. And that
virtual network is assigned to the Server 2003 VM.

I just don't have network connectivity.

What am I doing wrong?

Thx.


"Meinolf Weber" wrote:

> Hello JJ,
>
> During the 2003 first install you don't have to. The machine will be installed
> with the server operating system and after that you can install the thinigs
> you like. A domain will be created when you run dcpromo from the run line
> and then it will ask you for the domainname etc.
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
>
> > During installation for Windows Server 2003 Std, do you have to
> > specify that Server 2003 should be joining a domain for network
> > connectivity to work? I don't have a domain. This installation of
> > Server 2003 would be my root domain controller. Do I still have to
> > specify the root domain as the domain for Server 2003 to join during
> > installation for network connectivity to work?
> >
> > My problem is that I did not specify a domain during installation and
> > now there's no network connectivity.
> >
> > Thanks.
> >
>
>
>

Hello JJ,

Please post an ipconfig /all from the VM and from the vista machine.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.

> Then why don't I have network connectivity? Here's my setup:
>
> 1. Windows Vista 64-bit on the bare metal.
> 2. Virtual Server 2005 R2 SP1 64-bit on top of Vista
> 3. Windows Server 2003 Std on top of a Virtual Server VM.
> I have a virtual network configured in Virtual Server with my active
> NIC that has an Internet connection assigned to that virtual network.
> And that virtual network is assigned to the Server 2003 VM.
>
> I just don't have network connectivity.
>
> What am I doing wrong?
>
> Thx.
>
> "Meinolf Weber" wrote:
>
>> Hello JJ,
>>
>> During the 2003 first install you don't have to. The machine will be
>> installed with the server operating system and after that you can
>> install the thinigs you like. A domain will be created when you run
>> dcpromo from the run line and then it will ask you for the domainname
>> etc.
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers
>> no rights.
>>> During installation for Windows Server 2003 Std, do you have to
>>> specify that Server 2003 should be joining a domain for network
>>> connectivity to work? I don't have a domain. This installation of
>>> Server 2003 would be my root domain controller. Do I still have to
>>> specify the root domain as the domain for Server 2003 to join during
>>> installation for network connectivity to work?
>>>
>>> My problem is that I did not specify a domain during installation
>>> and now there's no network connectivity.
>>>
>>> Thanks.
>>>

Hi:

I can't find a way to copy the output of ipconfig/all from the VM to the
host's clipboard. How can I do this?

Thanks.

"Meinolf Weber" wrote:

> Hello JJ,
>
> Please post an ipconfig /all from the VM and from the vista machine.
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
>
> > Then why don't I have network connectivity? Here's my setup:
> >
> > 1. Windows Vista 64-bit on the bare metal.
> > 2. Virtual Server 2005 R2 SP1 64-bit on top of Vista
> > 3. Windows Server 2003 Std on top of a Virtual Server VM.
> > I have a virtual network configured in Virtual Server with my active
> > NIC that has an Internet connection assigned to that virtual network.
> > And that virtual network is assigned to the Server 2003 VM.
> >
> > I just don't have network connectivity.
> >
> > What am I doing wrong?
> >
> > Thx.
> >
> > "Meinolf Weber" wrote:
> >
> >> Hello JJ,
> >>
> >> During the 2003 first install you don't have to. The machine will be
> >> installed with the server operating system and after that you can
> >> install the thinigs you like. A domain will be created when you run
> >> dcpromo from the run line and then it will ask you for the domainname
> >> etc.
> >>
> >> Best regards
> >>
> >> Meinolf Weber
> >> Disclaimer: This posting is provided "AS IS" with no warranties, and
> >> confers
> >> no rights.
> >>> During installation for Windows Server 2003 Std, do you have to
> >>> specify that Server 2003 should be joining a domain for network
> >>> connectivity to work? I don't have a domain. This installation of
> >>> Server 2003 would be my root domain controller. Do I still have to
> >>> specify the root domain as the domain for Server 2003 to join during
> >>> installation for network connectivity to work?
> >>>
> >>> My problem is that I did not specify a domain during installation
> >>> and now there's no network connectivity.
> >>>
> >>> Thanks.
> >>>
>
>
>

You really need to think about what you are doing here before you get
yourself into trouble. Setting up a domain is not a trivial thing to do and
can have unexpected results for the unwary.

For a start, forget about Internet connectivity for your domain
controller now. In fact I would recommend that you put it on the internal
virtual network which has no Internet connection. Give your server a static
IP in its own private IP subnet.

Now run dcpromo. Select the option to create a new DC in a new domain
and new forest. Let dcpromo set up DNS and DHCP when it offers you the
option. If you want to check out how AD works, install a client OS in
another vm also connected to the internal network.

Giving a domain Internet access involves two things. Firstly you need a
routed connection to the Internet. Secondly, you need to modify the local
DNS server to forward to a public DNS.

"JJ" <(E-Mail Removed)> wrote in message
news:26173D70-3DFA-4D52-AD60-(E-Mail Removed)...
> Hi:
>
> I can't find a way to copy the output of ipconfig/all from the VM to the
> host's clipboard. How can I do this?
>
> Thanks.
>
> "Meinolf Weber" wrote:
>
>> Hello JJ,
>>
>> Please post an ipconfig /all from the VM and from the vista machine.
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers
>> no rights.
>>
>> > Then why don't I have network connectivity? Here's my setup:
>> >
>> > 1. Windows Vista 64-bit on the bare metal.
>> > 2. Virtual Server 2005 R2 SP1 64-bit on top of Vista
>> > 3. Windows Server 2003 Std on top of a Virtual Server VM.
>> > I have a virtual network configured in Virtual Server with my active
>> > NIC that has an Internet connection assigned to that virtual network.
>> > And that virtual network is assigned to the Server 2003 VM.
>> >
>> > I just don't have network connectivity.
>> >
>> > What am I doing wrong?
>> >
>> > Thx.
>> >
>> > "Meinolf Weber" wrote:
>> >
>> >> Hello JJ,
>> >>
>> >> During the 2003 first install you don't have to. The machine will be
>> >> installed with the server operating system and after that you can
>> >> install the thinigs you like. A domain will be created when you run
>> >> dcpromo from the run line and then it will ask you for the domainname
>> >> etc.
>> >>
>> >> Best regards
>> >>
>> >> Meinolf Weber
>> >> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> >> confers
>> >> no rights.
>> >>> During installation for Windows Server 2003 Std, do you have to
>> >>> specify that Server 2003 should be joining a domain for network
>> >>> connectivity to work? I don't have a domain. This installation of
>> >>> Server 2003 would be my root domain controller. Do I still have to
>> >>> specify the root domain as the domain for Server 2003 to join during
>> >>> installation for network connectivity to work?
>> >>>
>> >>> My problem is that I did not specify a domain during installation
>> >>> and now there's no network connectivity.
>> >>>
>> >>> Thanks.
>> >>>
>>
>>
>>

Bill:

All I want to do at this stage is complete the installation of Server 2003
by using it's Windows Update feature. For that, I need a connection to the
Internet.

I'm not sure I want to make this a fully operational domain controller. This
is something like trial software. I only want to use this as a development
server. I have SBS 2003 which I will use for my live site.

Now, I have another problem. I installed the Microsoft Loopback Adapter as
you suggested in your posting on the Virtual Server 2005 newsgroup. And I
enabled ICS on the host like you said. Now, the loopback adapter has limited
connectivity. How do I assign the shared ICS connection to the loopback
adapter? And should the loopback adapter get a new IP address automatically
or should it have a static IP address?

Thanks.


"Bill Grant" wrote:

> You really need to think about what you are doing here before you get
> yourself into trouble. Setting up a domain is not a trivial thing to do and
> can have unexpected results for the unwary.
>
> For a start, forget about Internet connectivity for your domain
> controller now. In fact I would recommend that you put it on the internal
> virtual network which has no Internet connection. Give your server a static
> IP in its own private IP subnet.
>
> Now run dcpromo. Select the option to create a new DC in a new domain
> and new forest. Let dcpromo set up DNS and DHCP when it offers you the
> option. If you want to check out how AD works, install a client OS in
> another vm also connected to the internal network.
>
> Giving a domain Internet access involves two things. Firstly you need a
> routed connection to the Internet. Secondly, you need to modify the local
> DNS server to forward to a public DNS.
>
> "JJ" <(E-Mail Removed)> wrote in message
> news:26173D70-3DFA-4D52-AD60-(E-Mail Removed)...
> > Hi:
> >
> > I can't find a way to copy the output of ipconfig/all from the VM to the
> > host's clipboard. How can I do this?
> >
> > Thanks.
> >
> > "Meinolf Weber" wrote:
> >
> >> Hello JJ,
> >>
> >> Please post an ipconfig /all from the VM and from the vista machine.
> >>
> >> Best regards
> >>
> >> Meinolf Weber
> >> Disclaimer: This posting is provided "AS IS" with no warranties, and
> >> confers
> >> no rights.
> >>
> >> > Then why don't I have network connectivity? Here's my setup:
> >> >
> >> > 1. Windows Vista 64-bit on the bare metal.
> >> > 2. Virtual Server 2005 R2 SP1 64-bit on top of Vista
> >> > 3. Windows Server 2003 Std on top of a Virtual Server VM.
> >> > I have a virtual network configured in Virtual Server with my active
> >> > NIC that has an Internet connection assigned to that virtual network.
> >> > And that virtual network is assigned to the Server 2003 VM.
> >> >
> >> > I just don't have network connectivity.
> >> >
> >> > What am I doing wrong?
> >> >
> >> > Thx.
> >> >
> >> > "Meinolf Weber" wrote:
> >> >
> >> >> Hello JJ,
> >> >>
> >> >> During the 2003 first install you don't have to. The machine will be
> >> >> installed with the server operating system and after that you can
> >> >> install the thinigs you like. A domain will be created when you run
> >> >> dcpromo from the run line and then it will ask you for the domainname
> >> >> etc.
> >> >>
> >> >> Best regards
> >> >>
> >> >> Meinolf Weber
> >> >> Disclaimer: This posting is provided "AS IS" with no warranties, and
> >> >> confers
> >> >> no rights.
> >> >>> During installation for Windows Server 2003 Std, do you have to
> >> >>> specify that Server 2003 should be joining a domain for network
> >> >>> connectivity to work? I don't have a domain. This installation of
> >> >>> Server 2003 would be my root domain controller. Do I still have to
> >> >>> specify the root domain as the domain for Server 2003 to join during
> >> >>> installation for network connectivity to work?
> >> >>>
> >> >>> My problem is that I did not specify a domain during installation
> >> >>> and now there's no network connectivity.
> >> >>>
> >> >>> Thanks.
> >> >>>
> >>
> >>
> >>
>
>
>

If you have connected the vm to the loopback network it should get its
config automatically from ICS.

Having said that, a server OS is not a good ICS client. You could try to
manually configure the vm with a 192.168.0.x IP, 255.255.255.0 subnet mask
and set 192.168.0.1 for the gateway and DNS address.



"JJ" <(E-Mail Removed)> wrote in message
news:B7351EC9-E5C8-4099-A7AB-(E-Mail Removed)...
> Bill:
>
> All I want to do at this stage is complete the installation of Server 2003
> by using it's Windows Update feature. For that, I need a connection to the
> Internet.
>
> I'm not sure I want to make this a fully operational domain controller.
> This
> is something like trial software. I only want to use this as a development
> server. I have SBS 2003 which I will use for my live site.
>
> Now, I have another problem. I installed the Microsoft Loopback Adapter as
> you suggested in your posting on the Virtual Server 2005 newsgroup. And I
> enabled ICS on the host like you said. Now, the loopback adapter has
> limited
> connectivity. How do I assign the shared ICS connection to the loopback
> adapter? And should the loopback adapter get a new IP address
> automatically
> or should it have a static IP address?
>
> Thanks.
>
>
> "Bill Grant" wrote:
>
>> You really need to think about what you are doing here before you get
>> yourself into trouble. Setting up a domain is not a trivial thing to do
>> and
>> can have unexpected results for the unwary.
>>
>> For a start, forget about Internet connectivity for your domain
>> controller now. In fact I would recommend that you put it on the internal
>> virtual network which has no Internet connection. Give your server a
>> static
>> IP in its own private IP subnet.
>>
>> Now run dcpromo. Select the option to create a new DC in a new domain
>> and new forest. Let dcpromo set up DNS and DHCP when it offers you the
>> option. If you want to check out how AD works, install a client OS in
>> another vm also connected to the internal network.
>>
>> Giving a domain Internet access involves two things. Firstly you need
>> a
>> routed connection to the Internet. Secondly, you need to modify the local
>> DNS server to forward to a public DNS.
>>
>> "JJ" <(E-Mail Removed)> wrote in message
>> news:26173D70-3DFA-4D52-AD60-(E-Mail Removed)...
>> > Hi:
>> >
>> > I can't find a way to copy the output of ipconfig/all from the VM to
>> > the
>> > host's clipboard. How can I do this?
>> >
>> > Thanks.
>> >
>> > "Meinolf Weber" wrote:
>> >
>> >> Hello JJ,
>> >>
>> >> Please post an ipconfig /all from the VM and from the vista machine.
>> >>
>> >> Best regards
>> >>
>> >> Meinolf Weber
>> >> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> >> confers
>> >> no rights.
>> >>
>> >> > Then why don't I have network connectivity? Here's my setup:
>> >> >
>> >> > 1. Windows Vista 64-bit on the bare metal.
>> >> > 2. Virtual Server 2005 R2 SP1 64-bit on top of Vista
>> >> > 3. Windows Server 2003 Std on top of a Virtual Server VM.
>> >> > I have a virtual network configured in Virtual Server with my active
>> >> > NIC that has an Internet connection assigned to that virtual
>> >> > network.
>> >> > And that virtual network is assigned to the Server 2003 VM.
>> >> >
>> >> > I just don't have network connectivity.
>> >> >
>> >> > What am I doing wrong?
>> >> >
>> >> > Thx.
>> >> >
>> >> > "Meinolf Weber" wrote:
>> >> >
>> >> >> Hello JJ,
>> >> >>
>> >> >> During the 2003 first install you don't have to. The machine will
>> >> >> be
>> >> >> installed with the server operating system and after that you can
>> >> >> install the thinigs you like. A domain will be created when you run
>> >> >> dcpromo from the run line and then it will ask you for the
>> >> >> domainname
>> >> >> etc.
>> >> >>
>> >> >> Best regards
>> >> >>
>> >> >> Meinolf Weber
>> >> >> Disclaimer: This posting is provided "AS IS" with no warranties,
>> >> >> and
>> >> >> confers
>> >> >> no rights.
>> >> >>> During installation for Windows Server 2003 Std, do you have to
>> >> >>> specify that Server 2003 should be joining a domain for network
>> >> >>> connectivity to work? I don't have a domain. This installation of
>> >> >>> Server 2003 would be my root domain controller. Do I still have to
>> >> >>> specify the root domain as the domain for Server 2003 to join
>> >> >>> during
>> >> >>> installation for network connectivity to work?
>> >> >>>
>> >> >>> My problem is that I did not specify a domain during installation
>> >> >>> and now there's no network connectivity.
>> >> >>>
>> >> >>> Thanks.
>> >> >>>
>> >>
>> >>
>> >>
>>
>>
>>

Hi Bill:

Before we get to the VM, the loopback adapter has to be configured
correctly, right? As of now, it has limited connectivity.

How do I assign the shared ICS connection to the loopback adapter?

Thanks.

"Bill Grant" wrote:

> If you have connected the vm to the loopback network it should get its
> config automatically from ICS.
>
> Having said that, a server OS is not a good ICS client. You could try to
> manually configure the vm with a 192.168.0.x IP, 255.255.255.0 subnet mask
> and set 192.168.0.1 for the gateway and DNS address.
>
>
>
> "JJ" <(E-Mail Removed)> wrote in message
> news:B7351EC9-E5C8-4099-A7AB-(E-Mail Removed)...
> > Bill:
> >
> > All I want to do at this stage is complete the installation of Server 2003
> > by using it's Windows Update feature. For that, I need a connection to the
> > Internet.
> >
> > I'm not sure I want to make this a fully operational domain controller.
> > This
> > is something like trial software. I only want to use this as a development
> > server. I have SBS 2003 which I will use for my live site.
> >
> > Now, I have another problem. I installed the Microsoft Loopback Adapter as
> > you suggested in your posting on the Virtual Server 2005 newsgroup. And I
> > enabled ICS on the host like you said. Now, the loopback adapter has
> > limited
> > connectivity. How do I assign the shared ICS connection to the loopback
> > adapter? And should the loopback adapter get a new IP address
> > automatically
> > or should it have a static IP address?
> >
> > Thanks.
> >
> >
> > "Bill Grant" wrote:
> >
> >> You really need to think about what you are doing here before you get
> >> yourself into trouble. Setting up a domain is not a trivial thing to do
> >> and
> >> can have unexpected results for the unwary.
> >>
> >> For a start, forget about Internet connectivity for your domain
> >> controller now. In fact I would recommend that you put it on the internal
> >> virtual network which has no Internet connection. Give your server a
> >> static
> >> IP in its own private IP subnet.
> >>
> >> Now run dcpromo. Select the option to create a new DC in a new domain
> >> and new forest. Let dcpromo set up DNS and DHCP when it offers you the
> >> option. If you want to check out how AD works, install a client OS in
> >> another vm also connected to the internal network.
> >>
> >> Giving a domain Internet access involves two things. Firstly you need
> >> a
> >> routed connection to the Internet. Secondly, you need to modify the local
> >> DNS server to forward to a public DNS.
> >>
> >> "JJ" <(E-Mail Removed)> wrote in message
> >> news:26173D70-3DFA-4D52-AD60-(E-Mail Removed)...
> >> > Hi:
> >> >
> >> > I can't find a way to copy the output of ipconfig/all from the VM to
> >> > the
> >> > host's clipboard. How can I do this?
> >> >
> >> > Thanks.
> >> >
> >> > "Meinolf Weber" wrote:
> >> >
> >> >> Hello JJ,
> >> >>
> >> >> Please post an ipconfig /all from the VM and from the vista machine.
> >> >>
> >> >> Best regards
> >> >>
> >> >> Meinolf Weber
> >> >> Disclaimer: This posting is provided "AS IS" with no warranties, and
> >> >> confers
> >> >> no rights.
> >> >>
> >> >> > Then why don't I have network connectivity? Here's my setup:
> >> >> >
> >> >> > 1. Windows Vista 64-bit on the bare metal.
> >> >> > 2. Virtual Server 2005 R2 SP1 64-bit on top of Vista
> >> >> > 3. Windows Server 2003 Std on top of a Virtual Server VM.
> >> >> > I have a virtual network configured in Virtual Server with my active
> >> >> > NIC that has an Internet connection assigned to that virtual
> >> >> > network.
> >> >> > And that virtual network is assigned to the Server 2003 VM.
> >> >> >
> >> >> > I just don't have network connectivity.
> >> >> >
> >> >> > What am I doing wrong?
> >> >> >
> >> >> > Thx.
> >> >> >
> >> >> > "Meinolf Weber" wrote:
> >> >> >
> >> >> >> Hello JJ,
> >> >> >>
> >> >> >> During the 2003 first install you don't have to. The machine will
> >> >> >> be
> >> >> >> installed with the server operating system and after that you can
> >> >> >> install the thinigs you like. A domain will be created when you run
> >> >> >> dcpromo from the run line and then it will ask you for the
> >> >> >> domainname
> >> >> >> etc.
> >> >> >>
> >> >> >> Best regards
> >> >> >>
> >> >> >> Meinolf Weber
> >> >> >> Disclaimer: This posting is provided "AS IS" with no warranties,
> >> >> >> and
> >> >> >> confers
> >> >> >> no rights.
> >> >> >>> During installation for Windows Server 2003 Std, do you have to
> >> >> >>> specify that Server 2003 should be joining a domain for network
> >> >> >>> connectivity to work? I don't have a domain. This installation of
> >> >> >>> Server 2003 would be my root domain controller. Do I still have to
> >> >> >>> specify the root domain as the domain for Server 2003 to join
> >> >> >>> during
> >> >> >>> installation for network connectivity to work?
> >> >> >>>
> >> >> >>> My problem is that I did not specify a domain during installation
> >> >> >>> and now there's no network connectivity.
> >> >> >>>
> >> >> >>> Thanks.
> >> >> >>>
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>

If you installed ICS with the loopback adapter selected as the private
interface, it should now be configured with an IP of 192.168.0.1/24. (This
config is done by ICS). It won't have connectivity with anything except a vm
which has its NIC set to use the loopback virtual network.

"JJ" <(E-Mail Removed)> wrote in message
news:CD2EA636-0B5A-4C59-9345-(E-Mail Removed)...
> Hi Bill:
>
> Before we get to the VM, the loopback adapter has to be configured
> correctly, right? As of now, it has limited connectivity.
>
> How do I assign the shared ICS connection to the loopback adapter?
>
> Thanks.
>
> "Bill Grant" wrote:
>
>> If you have connected the vm to the loopback network it should get its
>> config automatically from ICS.
>>
>> Having said that, a server OS is not a good ICS client. You could try to
>> manually configure the vm with a 192.168.0.x IP, 255.255.255.0 subnet
>> mask
>> and set 192.168.0.1 for the gateway and DNS address.
>>
>>
>>
>> "JJ" <(E-Mail Removed)> wrote in message
>> news:B7351EC9-E5C8-4099-A7AB-(E-Mail Removed)...
>> > Bill:
>> >
>> > All I want to do at this stage is complete the installation of Server
>> > 2003
>> > by using it's Windows Update feature. For that, I need a connection to
>> > the
>> > Internet.
>> >
>> > I'm not sure I want to make this a fully operational domain controller.
>> > This
>> > is something like trial software. I only want to use this as a
>> > development
>> > server. I have SBS 2003 which I will use for my live site.
>> >
>> > Now, I have another problem. I installed the Microsoft Loopback Adapter
>> > as
>> > you suggested in your posting on the Virtual Server 2005 newsgroup. And
>> > I
>> > enabled ICS on the host like you said. Now, the loopback adapter has
>> > limited
>> > connectivity. How do I assign the shared ICS connection to the loopback
>> > adapter? And should the loopback adapter get a new IP address
>> > automatically
>> > or should it have a static IP address?
>> >
>> > Thanks.
>> >
>> >
>> > "Bill Grant" wrote:
>> >
>> >> You really need to think about what you are doing here before you
>> >> get
>> >> yourself into trouble. Setting up a domain is not a trivial thing to
>> >> do
>> >> and
>> >> can have unexpected results for the unwary.
>> >>
>> >> For a start, forget about Internet connectivity for your domain
>> >> controller now. In fact I would recommend that you put it on the
>> >> internal
>> >> virtual network which has no Internet connection. Give your server a
>> >> static
>> >> IP in its own private IP subnet.
>> >>
>> >> Now run dcpromo. Select the option to create a new DC in a new
>> >> domain
>> >> and new forest. Let dcpromo set up DNS and DHCP when it offers you the
>> >> option. If you want to check out how AD works, install a client OS in
>> >> another vm also connected to the internal network.
>> >>
>> >> Giving a domain Internet access involves two things. Firstly you
>> >> need
>> >> a
>> >> routed connection to the Internet. Secondly, you need to modify the
>> >> local
>> >> DNS server to forward to a public DNS.
>> >>
>> >> "JJ" <(E-Mail Removed)> wrote in message
>> >> news:26173D70-3DFA-4D52-AD60-(E-Mail Removed)...
>> >> > Hi:
>> >> >
>> >> > I can't find a way to copy the output of ipconfig/all from the VM to
>> >> > the
>> >> > host's clipboard. How can I do this?
>> >> >
>> >> > Thanks.
>> >> >
>> >> > "Meinolf Weber" wrote:
>> >> >
>> >> >> Hello JJ,
>> >> >>
>> >> >> Please post an ipconfig /all from the VM and from the vista
>> >> >> machine.
>> >> >>
>> >> >> Best regards
>> >> >>
>> >> >> Meinolf Weber
>> >> >> Disclaimer: This posting is provided "AS IS" with no warranties,
>> >> >> and
>> >> >> confers
>> >> >> no rights.
>> >> >>
>> >> >> > Then why don't I have network connectivity? Here's my setup:
>> >> >> >
>> >> >> > 1. Windows Vista 64-bit on the bare metal.
>> >> >> > 2. Virtual Server 2005 R2 SP1 64-bit on top of Vista
>> >> >> > 3. Windows Server 2003 Std on top of a Virtual Server VM.
>> >> >> > I have a virtual network configured in Virtual Server with my
>> >> >> > active
>> >> >> > NIC that has an Internet connection assigned to that virtual
>> >> >> > network.
>> >> >> > And that virtual network is assigned to the Server 2003 VM.
>> >> >> >
>> >> >> > I just don't have network connectivity.
>> >> >> >
>> >> >> > What am I doing wrong?
>> >> >> >
>> >> >> > Thx.
>> >> >> >
>> >> >> > "Meinolf Weber" wrote:
>> >> >> >
>> >> >> >> Hello JJ,
>> >> >> >>
>> >> >> >> During the 2003 first install you don't have to. The machine
>> >> >> >> will
>> >> >> >> be
>> >> >> >> installed with the server operating system and after that you
>> >> >> >> can
>> >> >> >> install the thinigs you like. A domain will be created when you
>> >> >> >> run
>> >> >> >> dcpromo from the run line and then it will ask you for the
>> >> >> >> domainname
>> >> >> >> etc.
>> >> >> >>
>> >> >> >> Best regards
>> >> >> >>
>> >> >> >> Meinolf Weber
>> >> >> >> Disclaimer: This posting is provided "AS IS" with no warranties,
>> >> >> >> and
>> >> >> >> confers
>> >> >> >> no rights.
>> >> >> >>> During installation for Windows Server 2003 Std, do you have to
>> >> >> >>> specify that Server 2003 should be joining a domain for network
>> >> >> >>> connectivity to work? I don't have a domain. This installation
>> >> >> >>> of
>> >> >> >>> Server 2003 would be my root domain controller. Do I still have
>> >> >> >>> to
>> >> >> >>> specify the root domain as the domain for Server 2003 to join
>> >> >> >>> during
>> >> >> >>> installation for network connectivity to work?
>> >> >> >>>
>> >> >> >>> My problem is that I did not specify a domain during
>> >> >> >>> installation
>> >> >> >>> and now there's no network connectivity.
>> >> >> >>>
>> >> >> >>> Thanks.
>> >> >> >>>
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
>>