ethtool for linksys NC100 card

Group,

Does anyone know why when I run

ethtool eth0

on my linksys nc100 network everywhere fast ethernet 10/100 card I get

[root@home ~]# uname -a
Linux home 2.6.9-42.0.3.EL #1 Fri Oct 6 05:59:54 CDT 2006 i686 i686 i386
GNU/Linux

[root@home ~]# ethtool eth0
Settings for eth0:
No data available

I was hoping to experiment with the wake on lan option.

[root@home ~]# mii-tool eth0
eth0: negotiated 100baseTx-FD, link ok

I have googled for this and it seems like other people are using this card
and don't have the same issue

[root@home ~]# lspci | grep Eth
02:0a.0 Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet
10/100 (rev 11)
[root@home ~]# ethtool -i eth0
driver: tulip
version: 1.1.13
firmware-version:
bus-info: 0000:02:0a.0

Thanks for you help
Scott.





Scott

On Wed, 8 Aug 2007 17:38:35 -0400, Scott wrote:
> Group,
>
> Does anyone know why when I run
>
> ethtool eth0
>
> on my linksys nc100 network everywhere fast ethernet 10/100 card I get
>
> [root@home ~]# uname -a
> Linux home 2.6.9-42.0.3.EL #1 Fri Oct 6 05:59:54 CDT 2006 i686 i686 i386
> GNU/Linux
>
> [root@home ~]# ethtool eth0
> Settings for eth0:
> No data available

Do not know why.
I do have the same problem.
# ethtool eth0
Settings for eth0:
No data available

# mii-tool -v eth0
eth0: no autonegotiation, 100baseTx-FD, link ok
product info: vendor 00:c0:b4, model 0 rev 8
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control