Advice on Router selection

I have been happily using the Netgear DG834 (and the 814 before it) for
many years.

I now need a facility it does not have and would be grateful for advice
for a good, reliable, reasonably priced alternative.

I use the port-forwarding feature a lot (20+ entries). The DG834 is
limited in that you cannot alter the outgoing port to be different from
the incoming port.

I now have several machines that are limited to using a specific port so
I need to map different incoming ports to the same port on different
machines.

Any advice welcome.
--
Les Desser
(The Reply-to address IS valid)


Les Desser

"Les Desser" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>I have been happily using the Netgear DG834 (and the 814 before it) for
>many years.
>
> I now need a facility it does not have and would be grateful for advice
> for a good, reliable, reasonably priced alternative.
>
> I use the port-forwarding feature a lot (20+ entries). The DG834 is
> limited in that you cannot alter the outgoing port to be different from
> the incoming port.
>
> I now have several machines that are limited to using a specific port so I
> need to map different incoming ports to the same port on different
> machines.
>
> Any advice welcome.
> --
> Les Desser
> (The Reply-to address IS valid)

Use Port Triggering instead of port forwarding

In article <f6duiv$2qs$(E-Mail Removed)>, ABC
<(E-Mail Removed)> Tue, 3 Jul 2007 17:47:26 writes

>Use Port Triggering instead of port forwarding

What is that?
--
Les Desser
(The Reply-to address IS valid)

In article <qsYjv+(E-Mail Removed)>, Les Desser
<(E-Mail Removed)> Tue, 3 Jul 2007 22:51:55 writes

>In article <f6duiv$2qs$(E-Mail Removed)>, ABC
><(E-Mail Removed)> Tue, 3 Jul 2007 17:47:26 writes
>
>>Use Port Triggering instead of port forwarding
>
>What is that?

I have done some Googling on this.

As far as I can see this is not relevant here as the connection is
initiated remotely so I have to use port forwarding.
--
Les Desser
(The Reply-to address IS valid)