XP disk on ME System: Hangup during setup update

"Please wait while Setup updates your configuration files"

I ran a network setup disk on my ME machine which was
created on my XP system. Now, the ME hangs during boot,
with the message above. Never goes beyond this message.

How can I bypass this step and delete the XP installation?
Unfortunately, I do not have a startup disk for my ME
machine :-(


Ken K. in Atlanta

Have you been running with the Quack?
Are you running Norton System Quack - - errr - Doctor?
If so, then read on......

You may have up to 32,000 empty OEM*.INF files sitting in your
c:\Windows\INF folder, which prevents any program putting a legitimate *.INF
file in there (it also slow your system down to stop, trying to read them
and sort the [non-existent] contents!).
You need to DELETE all 0byte (and ONLY the 0byte) OEM*.INF files.
look here for information on how to do that , and how to prevent it
happening again (i.e. TURN OFF NORTON SYSTEM DOCTOR - unless you are
actively troubleshooting something)

The Symantec site:
http://service1.symantec.com/SUPPORT...15010309&src=n

also
"Computer Stops Responding (Hangs) During Setup, Installing Updates, or
Adding New Hardware"
(http://support.microsoft.com/default...;en-us;Q281967)
also
http://support.microsoft.com/default...;en-us;Q301540
(which contains the fix for your problem in the NOTE under the patch
description)
Phone your Local MS office, and tell them your problem quoting Q301540 -
they'll either send you the patch, or give you a one-use password, for the
cost of the call.

Good Luck


--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
or
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp
"Ken K. in Atlanta" <(E-Mail Removed)> wrote in message
news:113a01c437ca$7f567330$(E-Mail Removed)...
> "Please wait while Setup updates your configuration files"
>
> I ran a network setup disk on my ME machine which was
> created on my XP system. Now, the ME hangs during boot,
> with the message above. Never goes beyond this message.
>
> How can I bypass this step and delete the XP installation?
> Unfortunately, I do not have a startup disk for my ME
> machine :-(