Windows 2003 Backup DC setup

We are planning install new Server ( different Hardware) for "Backup"
Windows 2003 DC. Two Server system state will auto sync, That if primary
server crash , another server will auto bring up and online. Pls advice any
solution .


thanks
ITITITI




IT-BOY

hi,
it depends -how many sites do you have?
for only one site both must have dns and must be global catalog, in case of
failure you will have to move some roles to the backup.
if you have more sites depends of roles and site replication topologie.
--
Dragos CAMARA
MCSA Windows 2003 server


"IT-BOY" wrote:

> We are planning install new Server ( different Hardware) for "Backup"
> Windows 2003 DC. Two Server system state will auto sync, That if primary
> server crash , another server will auto bring up and online. Pls advice any
> solution .
>
>
> thanks
> ITITITI
>
>
>

Pls advice how to setup. We have one site, I want put this backup DC to
another floor, floor to floor with network, So I want real time sync the dns
/ system state / GC ..... pls advice how can setup.

Thanks
ITITITI
"Dragos CAMARA" <(E-Mail Removed)> wrote in message
news:409380EA-20DE-4DC7-9B36-(E-Mail Removed)...
> hi,
> it depends -how many sites do you have?
> for only one site both must have dns and must be global catalog, in case
> of
> failure you will have to move some roles to the backup.
> if you have more sites depends of roles and site replication topologie.
> --
> Dragos CAMARA
> MCSA Windows 2003 server
>
>
> "IT-BOY" wrote:
>
>> We are planning install new Server ( different Hardware) for "Backup"
>> Windows 2003 DC. Two Server system state will auto sync, That if
>> primary
>> server crash , another server will auto bring up and online. Pls advice
>> any
>> solution .
>>
>>
>> thanks
>> ITITITI
>>
>>
>>

hi,
on backup server instal dns server, run dcpromo with new domain cotroller on
existing domain. After you promoted as domain controller go to active
directory sites and services ,NTDS settings on backup server check the Global
Catalog.
On clients on secundary DNS put the IP of the backup server. If you have a
dhcp there you could simply add on dhcp that, if the dhcp is on the main
domain controller then on backup server install dhcp server and put all the
settings like main domain controller and split the scope of principal
according with the the rule 80-20 wich means leave 80% of IPs on main server
and put 20% IPs on backup server.
--
Dragos CAMARA
MCSA Windows 2003 server


"ITCOM" wrote:

> Pls advice how to setup. We have one site, I want put this backup DC to
> another floor, floor to floor with network, So I want real time sync the dns
> / system state / GC ..... pls advice how can setup.
>
> Thanks
> ITITITI
> "Dragos CAMARA" <(E-Mail Removed)> wrote in message
> news:409380EA-20DE-4DC7-9B36-(E-Mail Removed)...
> > hi,
> > it depends -how many sites do you have?
> > for only one site both must have dns and must be global catalog, in case
> > of
> > failure you will have to move some roles to the backup.
> > if you have more sites depends of roles and site replication topologie.
> > --
> > Dragos CAMARA
> > MCSA Windows 2003 server
> >
> >
> > "IT-BOY" wrote:
> >
> >> We are planning install new Server ( different Hardware) for "Backup"
> >> Windows 2003 DC. Two Server system state will auto sync, That if
> >> primary
> >> server crash , another server will auto bring up and online. Pls advice
> >> any
> >> solution .
> >>
> >>
> >> thanks
> >> ITITITI
> >>
> >>
> >>
>
>
>

Hi Thanks.

Another, can you help me solve out another problems wit DHCP superscope, our
setup as below.
Now we have running 10.5.1.X /255.255.255.0 segment network. I want to keep
exisiting IP range / subnet mask and create one IP range scope (10.5.0.0/
255.255.255.254) in our DHCP server, All assign 10.5.0.0 IP will manual
reserve in new scope, pls advice how can setup.

Thanks

"Dragos CAMARA" <(E-Mail Removed)> wrote in message
news:65F3AC08-C605-4660-B72B-(E-Mail Removed)...
> hi,
> on backup server instal dns server, run dcpromo with new domain cotroller
> on
> existing domain. After you promoted as domain controller go to active
> directory sites and services ,NTDS settings on backup server check the
> Global
> Catalog.
> On clients on secundary DNS put the IP of the backup server. If you have a
> dhcp there you could simply add on dhcp that, if the dhcp is on the main
> domain controller then on backup server install dhcp server and put all
> the
> settings like main domain controller and split the scope of principal
> according with the the rule 80-20 wich means leave 80% of IPs on main
> server
> and put 20% IPs on backup server.
> --
> Dragos CAMARA
> MCSA Windows 2003 server
>
>
> "ITCOM" wrote:
>
>> Pls advice how to setup. We have one site, I want put this backup DC to
>> another floor, floor to floor with network, So I want real time sync the
>> dns
>> / system state / GC ..... pls advice how can setup.
>>
>> Thanks
>> ITITITI
>> "Dragos CAMARA" <(E-Mail Removed)> wrote in message
>> news:409380EA-20DE-4DC7-9B36-(E-Mail Removed)...
>> > hi,
>> > it depends -how many sites do you have?
>> > for only one site both must have dns and must be global catalog, in
>> > case
>> > of
>> > failure you will have to move some roles to the backup.
>> > if you have more sites depends of roles and site replication topologie.
>> > --
>> > Dragos CAMARA
>> > MCSA Windows 2003 server
>> >
>> >
>> > "IT-BOY" wrote:
>> >
>> >> We are planning install new Server ( different Hardware) for "Backup"
>> >> Windows 2003 DC. Two Server system state will auto sync, That if
>> >> primary
>> >> server crash , another server will auto bring up and online. Pls
>> >> advice
>> >> any
>> >> solution .
>> >>
>> >>
>> >> thanks
>> >> ITITITI
>> >>
>> >>
>> >>
>>
>>
>>

hi,
create the new scope with 10.5.0.0 add all the rezervations and other
settings wich have. create a superscope and add theese 2 scopes on the wizard
of creating the superscope.
--
Dragos CAMARA
MCSA Windows 2003 server


"ITCOM" wrote:

> Hi Thanks.
>
> Another, can you help me solve out another problems wit DHCP superscope, our
> setup as below.
> Now we have running 10.5.1.X /255.255.255.0 segment network. I want to keep
> exisiting IP range / subnet mask and create one IP range scope (10.5.0.0/
> 255.255.255.254) in our DHCP server, All assign 10.5.0.0 IP will manual
> reserve in new scope, pls advice how can setup.
>
> Thanks
>
> "Dragos CAMARA" <(E-Mail Removed)> wrote in message
> news:65F3AC08-C605-4660-B72B-(E-Mail Removed)...
> > hi,
> > on backup server instal dns server, run dcpromo with new domain cotroller
> > on
> > existing domain. After you promoted as domain controller go to active
> > directory sites and services ,NTDS settings on backup server check the
> > Global
> > Catalog.
> > On clients on secundary DNS put the IP of the backup server. If you have a
> > dhcp there you could simply add on dhcp that, if the dhcp is on the main
> > domain controller then on backup server install dhcp server and put all
> > the
> > settings like main domain controller and split the scope of principal
> > according with the the rule 80-20 wich means leave 80% of IPs on main
> > server
> > and put 20% IPs on backup server.
> > --
> > Dragos CAMARA
> > MCSA Windows 2003 server
> >
> >
> > "ITCOM" wrote:
> >
> >> Pls advice how to setup. We have one site, I want put this backup DC to
> >> another floor, floor to floor with network, So I want real time sync the
> >> dns
> >> / system state / GC ..... pls advice how can setup.
> >>
> >> Thanks
> >> ITITITI
> >> "Dragos CAMARA" <(E-Mail Removed)> wrote in message
> >> news:409380EA-20DE-4DC7-9B36-(E-Mail Removed)...
> >> > hi,
> >> > it depends -how many sites do you have?
> >> > for only one site both must have dns and must be global catalog, in
> >> > case
> >> > of
> >> > failure you will have to move some roles to the backup.
> >> > if you have more sites depends of roles and site replication topologie.
> >> > --
> >> > Dragos CAMARA
> >> > MCSA Windows 2003 server
> >> >
> >> >
> >> > "IT-BOY" wrote:
> >> >
> >> >> We are planning install new Server ( different Hardware) for "Backup"
> >> >> Windows 2003 DC. Two Server system state will auto sync, That if
> >> >> primary
> >> >> server crash , another server will auto bring up and online. Pls
> >> >> advice
> >> >> any
> >> >> solution .
> >> >>
> >> >>
> >> >> thanks
> >> >> ITITITI
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>

Hi Sorry, the first scope is currect 10.5.1.X / 255.255.255.0 , second scope
10.5.0.x / 255.255.254.0 , whch two scope add to one superscope, is
possiable, is overlap ....


"Dragos CAMARA" <(E-Mail Removed)> wrote in message
news:00732F67-CD93-47DE-89A0-(E-Mail Removed)...
> hi,
> create the new scope with 10.5.0.0 add all the rezervations and other
> settings wich have. create a superscope and add theese 2 scopes on the
> wizard
> of creating the superscope.
> --
> Dragos CAMARA
> MCSA Windows 2003 server
>
>
> "ITCOM" wrote:
>
>> Hi Thanks.
>>
>> Another, can you help me solve out another problems wit DHCP superscope,
>> our
>> setup as below.
>> Now we have running 10.5.1.X /255.255.255.0 segment network. I want to
>> keep
>> exisiting IP range / subnet mask and create one IP range scope (10.5.0.0/
>> 255.255.255.254) in our DHCP server, All assign 10.5.0.0 IP will manual
>> reserve in new scope, pls advice how can setup.
>>
>> Thanks
>>
>> "Dragos CAMARA" <(E-Mail Removed)> wrote in message
>> news:65F3AC08-C605-4660-B72B-(E-Mail Removed)...
>> > hi,
>> > on backup server instal dns server, run dcpromo with new domain
>> > cotroller
>> > on
>> > existing domain. After you promoted as domain controller go to active
>> > directory sites and services ,NTDS settings on backup server check the
>> > Global
>> > Catalog.
>> > On clients on secundary DNS put the IP of the backup server. If you
>> > have a
>> > dhcp there you could simply add on dhcp that, if the dhcp is on the
>> > main
>> > domain controller then on backup server install dhcp server and put all
>> > the
>> > settings like main domain controller and split the scope of principal
>> > according with the the rule 80-20 wich means leave 80% of IPs on main
>> > server
>> > and put 20% IPs on backup server.
>> > --
>> > Dragos CAMARA
>> > MCSA Windows 2003 server
>> >
>> >
>> > "ITCOM" wrote:
>> >
>> >> Pls advice how to setup. We have one site, I want put this backup DC
>> >> to
>> >> another floor, floor to floor with network, So I want real time sync
>> >> the
>> >> dns
>> >> / system state / GC ..... pls advice how can setup.
>> >>
>> >> Thanks
>> >> ITITITI
>> >> "Dragos CAMARA" <(E-Mail Removed)> wrote in message
>> >> news:409380EA-20DE-4DC7-9B36-(E-Mail Removed)...
>> >> > hi,
>> >> > it depends -how many sites do you have?
>> >> > for only one site both must have dns and must be global catalog, in
>> >> > case
>> >> > of
>> >> > failure you will have to move some roles to the backup.
>> >> > if you have more sites depends of roles and site replication
>> >> > topologie.
>> >> > --
>> >> > Dragos CAMARA
>> >> > MCSA Windows 2003 server
>> >> >
>> >> >
>> >> > "IT-BOY" wrote:
>> >> >
>> >> >> We are planning install new Server ( different Hardware) for
>> >> >> "Backup"
>> >> >> Windows 2003 DC. Two Server system state will auto sync, That if
>> >> >> primary
>> >> >> server crash , another server will auto bring up and online. Pls
>> >> >> advice
>> >> >> any
>> >> >> solution .
>> >> >>
>> >> >>
>> >> >> thanks
>> >> >> ITITITI
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
>>

hi,
i really don't understand why to do that, the second scope is so big? why
you don't use the second as 10.5.0.0/24? or if you really need so big on the
first scope you have to do some exclusions.
--
Dragos CAMARA
MCSA Windows 2003 server


"ITCOM" wrote:

> Hi Sorry, the first scope is currect 10.5.1.X / 255.255.255.0 , second scope
> 10.5.0.x / 255.255.254.0 , whch two scope add to one superscope, is
> possiable, is overlap ....
>
>
> "Dragos CAMARA" <(E-Mail Removed)> wrote in message
> news:00732F67-CD93-47DE-89A0-(E-Mail Removed)...
> > hi,
> > create the new scope with 10.5.0.0 add all the rezervations and other
> > settings wich have. create a superscope and add theese 2 scopes on the
> > wizard
> > of creating the superscope.
> > --
> > Dragos CAMARA
> > MCSA Windows 2003 server
> >
> >
> > "ITCOM" wrote:
> >
> >> Hi Thanks.
> >>
> >> Another, can you help me solve out another problems wit DHCP superscope,
> >> our
> >> setup as below.
> >> Now we have running 10.5.1.X /255.255.255.0 segment network. I want to
> >> keep
> >> exisiting IP range / subnet mask and create one IP range scope (10.5.0.0/
> >> 255.255.255.254) in our DHCP server, All assign 10.5.0.0 IP will manual
> >> reserve in new scope, pls advice how can setup.
> >>
> >> Thanks
> >>
> >> "Dragos CAMARA" <(E-Mail Removed)> wrote in message
> >> news:65F3AC08-C605-4660-B72B-(E-Mail Removed)...
> >> > hi,
> >> > on backup server instal dns server, run dcpromo with new domain
> >> > cotroller
> >> > on
> >> > existing domain. After you promoted as domain controller go to active
> >> > directory sites and services ,NTDS settings on backup server check the
> >> > Global
> >> > Catalog.
> >> > On clients on secundary DNS put the IP of the backup server. If you
> >> > have a
> >> > dhcp there you could simply add on dhcp that, if the dhcp is on the
> >> > main
> >> > domain controller then on backup server install dhcp server and put all
> >> > the
> >> > settings like main domain controller and split the scope of principal
> >> > according with the the rule 80-20 wich means leave 80% of IPs on main
> >> > server
> >> > and put 20% IPs on backup server.
> >> > --
> >> > Dragos CAMARA
> >> > MCSA Windows 2003 server
> >> >
> >> >
> >> > "ITCOM" wrote:
> >> >
> >> >> Pls advice how to setup. We have one site, I want put this backup DC
> >> >> to
> >> >> another floor, floor to floor with network, So I want real time sync
> >> >> the
> >> >> dns
> >> >> / system state / GC ..... pls advice how can setup.
> >> >>
> >> >> Thanks
> >> >> ITITITI
> >> >> "Dragos CAMARA" <(E-Mail Removed)> wrote in message
> >> >> news:409380EA-20DE-4DC7-9B36-(E-Mail Removed)...
> >> >> > hi,
> >> >> > it depends -how many sites do you have?
> >> >> > for only one site both must have dns and must be global catalog, in
> >> >> > case
> >> >> > of
> >> >> > failure you will have to move some roles to the backup.
> >> >> > if you have more sites depends of roles and site replication
> >> >> > topologie.
> >> >> > --
> >> >> > Dragos CAMARA
> >> >> > MCSA Windows 2003 server
> >> >> >
> >> >> >
> >> >> > "IT-BOY" wrote:
> >> >> >
> >> >> >> We are planning install new Server ( different Hardware) for
> >> >> >> "Backup"
> >> >> >> Windows 2003 DC. Two Server system state will auto sync, That if
> >> >> >> primary
> >> >> >> server crash , another server will auto bring up and online. Pls
> >> >> >> advice
> >> >> >> any
> >> >> >> solution .
> >> >> >>
> >> >> >>
> >> >> >> thanks
> >> >> >> ITITITI
> >> >> >>
> >> >> >>
> >> >> >>
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>

I just wanted to ask a quick question as I have a similar situation
with W2K as PDC and W2K3 as a member server. Will we need the same or
more number of licenses on the second BDC? The 2003 server is running
Terminal Services for a LOB application, do we need to consider
anything in this regard before promoting to BDC?

Thanks


On Jan 29, 5:27 am, Dragos CAMARA <drago...@remove-this.hotmail.com>
wrote:
> hi,
> i really don't understand why to do that, the second scope is so big? why
> you don't use the second as 10.5.0.0/24? or if you really need so big on the
> first scope you have to do some exclusions.
> --
> Dragos CAMARA
> MCSA Windows 2003 server
>
>
>
> "ITCOM" wrote:
> > Hi Sorry, the first scope is currect 10.5.1.X / 255.255.255.0 , second scope
> > 10.5.0.x / 255.255.254.0 , whch two scope add to one superscope, is
> > possiable, is overlap ....
>
> > "Dragos CAMARA" <drago...@remove-this.hotmail.com> wrote in message
> >news:00732F67-CD93-47DE-89A0-(E-Mail Removed)...
> > > hi,
> > > create the new scope with 10.5.0.0 add all the rezervations and other
> > > settings wich have. create a superscope and add theese 2 scopes on the
> > > wizard
> > > of creating the superscope.
> > > --
> > > Dragos CAMARA
> > > MCSA Windows 2003 server
>
> > > "ITCOM" wrote:
>
> > >> Hi Thanks.
>
> > >> Another, can you help me solve out another problems wit DHCP superscope,
> > >> our
> > >> setup as below.
> > >> Now we have running 10.5.1.X /255.255.255.0 segment network. I want to
> > >> keep
> > >> exisiting IP range / subnet mask and create one IP range scope (10.5.0.0/
> > >> 255.255.255.254) in our DHCP server, All assign 10.5.0.0 IP will manual
> > >> reserve in new scope, pls advice how can setup.
>
> > >> Thanks
>
> > >> "Dragos CAMARA" <drago...@remove-this.hotmail.com> wrote in message
> > >>news:65F3AC08-C605-4660-B72B-(E-Mail Removed)...
> > >> > hi,
> > >> > on backup server instal dns server, run dcpromo with new domain
> > >> > cotroller
> > >> > on
> > >> > existing domain. After you promoted as domain controller go to active
> > >> > directory sites and services ,NTDS settings on backup server check the
> > >> > Global
> > >> > Catalog.
> > >> > On clients on secundary DNS put the IP of the backup server. If you
> > >> > have a
> > >> > dhcp there you could simply add on dhcp that, if the dhcp is on the
> > >> > main
> > >> > domain controller then on backup server install dhcp server and put all
> > >> > the
> > >> > settings like main domain controller and split the scope of principal
> > >> > according with the the rule 80-20 wich means leave 80% of IPs on main
> > >> > server
> > >> > and put 20% IPs on backup server.
> > >> > --
> > >> > Dragos CAMARA
> > >> > MCSA Windows 2003 server
>
> > >> > "ITCOM" wrote:
>
> > >> >> Pls advice how to setup. We have one site, I want put this backup DC
> > >> >> to
> > >> >> another floor, floor to floor with network, So I want real time sync
> > >> >> the
> > >> >> dns
> > >> >> / system state / GC ..... pls advice how can setup.
>
> > >> >> Thanks
> > >> >> ITITITI
> > >> >> "Dragos CAMARA" <drago...@remove-this.hotmail.com> wrote in message
> > >> >>news:409380EA-20DE-4DC7-9B36-(E-Mail Removed)...
> > >> >> > hi,
> > >> >> > it depends -how many sites do you have?
> > >> >> > for only one site both must have dns and must be global catalog, in
> > >> >> > case
> > >> >> > of
> > >> >> > failure you will have to move some roles to the backup.
> > >> >> > if you have more sites depends of roles and site replication
> > >> >> > topologie.
> > >> >> > --
> > >> >> > Dragos CAMARA
> > >> >> > MCSA Windows 2003 server
>
> > >> >> > "IT-BOY" wrote:
>
> > >> >> >> We are planning install new Server ( different Hardware) for
> > >> >> >> "Backup"
> > >> >> >> Windows 2003 DC. Two Server system state will auto sync, That if
> > >> >> >> primary
> > >> >> >> server crash , another server will auto bring up and online. Pls
> > >> >> >> advice
> > >> >> >> any
> > >> >> >> solution .
>
> > >> >> >> thanks
> > >> >> >> ITITITI- Hide quoted text -- Show quoted text -

hi,
for security reason it's good to promote a Terminal Server as a domain
controller.
--
Dragos CAMARA
MCSA Windows 2003 server


"marishal" wrote:

>
> I just wanted to ask a quick question as I have a similar situation
> with W2K as PDC and W2K3 as a member server. Will we need the same or
> more number of licenses on the second BDC? The 2003 server is running
> Terminal Services for a LOB application, do we need to consider
> anything in this regard before promoting to BDC?
>
> Thanks
>
>
> On Jan 29, 5:27 am, Dragos CAMARA <drago...@remove-this.hotmail.com>
> wrote:
> > hi,
> > i really don't understand why to do that, the second scope is so big? why
> > you don't use the second as 10.5.0.0/24? or if you really need so big on the
> > first scope you have to do some exclusions.
> > --
> > Dragos CAMARA
> > MCSA Windows 2003 server
> >
> >
> >
> > "ITCOM" wrote:
> > > Hi Sorry, the first scope is currect 10.5.1.X / 255.255.255.0 , second scope
> > > 10.5.0.x / 255.255.254.0 , whch two scope add to one superscope, is
> > > possiable, is overlap ....
> >
> > > "Dragos CAMARA" <drago...@remove-this.hotmail.com> wrote in message
> > >news:00732F67-CD93-47DE-89A0-(E-Mail Removed)...
> > > > hi,
> > > > create the new scope with 10.5.0.0 add all the rezervations and other
> > > > settings wich have. create a superscope and add theese 2 scopes on the
> > > > wizard
> > > > of creating the superscope.
> > > > --
> > > > Dragos CAMARA
> > > > MCSA Windows 2003 server
> >
> > > > "ITCOM" wrote:
> >
> > > >> Hi Thanks.
> >
> > > >> Another, can you help me solve out another problems wit DHCP superscope,
> > > >> our
> > > >> setup as below.
> > > >> Now we have running 10.5.1.X /255.255.255.0 segment network. I want to
> > > >> keep
> > > >> exisiting IP range / subnet mask and create one IP range scope (10.5.0.0/
> > > >> 255.255.255.254) in our DHCP server, All assign 10.5.0.0 IP will manual
> > > >> reserve in new scope, pls advice how can setup.
> >
> > > >> Thanks
> >
> > > >> "Dragos CAMARA" <drago...@remove-this.hotmail.com> wrote in message
> > > >>news:65F3AC08-C605-4660-B72B-(E-Mail Removed)...
> > > >> > hi,
> > > >> > on backup server instal dns server, run dcpromo with new domain
> > > >> > cotroller
> > > >> > on
> > > >> > existing domain. After you promoted as domain controller go to active
> > > >> > directory sites and services ,NTDS settings on backup server check the
> > > >> > Global
> > > >> > Catalog.
> > > >> > On clients on secundary DNS put the IP of the backup server. If you
> > > >> > have a
> > > >> > dhcp there you could simply add on dhcp that, if the dhcp is on the
> > > >> > main
> > > >> > domain controller then on backup server install dhcp server and put all
> > > >> > the
> > > >> > settings like main domain controller and split the scope of principal
> > > >> > according with the the rule 80-20 wich means leave 80% of IPs on main
> > > >> > server
> > > >> > and put 20% IPs on backup server.
> > > >> > --
> > > >> > Dragos CAMARA
> > > >> > MCSA Windows 2003 server
> >
> > > >> > "ITCOM" wrote:
> >
> > > >> >> Pls advice how to setup. We have one site, I want put this backup DC
> > > >> >> to
> > > >> >> another floor, floor to floor with network, So I want real time sync
> > > >> >> the
> > > >> >> dns
> > > >> >> / system state / GC ..... pls advice how can setup.
> >
> > > >> >> Thanks
> > > >> >> ITITITI
> > > >> >> "Dragos CAMARA" <drago...@remove-this.hotmail.com> wrote in message
> > > >> >>news:409380EA-20DE-4DC7-9B36-(E-Mail Removed)...
> > > >> >> > hi,
> > > >> >> > it depends -how many sites do you have?
> > > >> >> > for only one site both must have dns and must be global catalog, in
> > > >> >> > case
> > > >> >> > of
> > > >> >> > failure you will have to move some roles to the backup.
> > > >> >> > if you have more sites depends of roles and site replication
> > > >> >> > topologie.
> > > >> >> > --
> > > >> >> > Dragos CAMARA
> > > >> >> > MCSA Windows 2003 server
> >
> > > >> >> > "IT-BOY" wrote:
> >
> > > >> >> >> We are planning install new Server ( different Hardware) for
> > > >> >> >> "Backup"
> > > >> >> >> Windows 2003 DC. Two Server system state will auto sync, That if
> > > >> >> >> primary
> > > >> >> >> server crash , another server will auto bring up and online. Pls
> > > >> >> >> advice
> > > >> >> >> any
> > > >> >> >> solution .
> >
> > > >> >> >> thanks
> > > >> >> >> ITITITI- Hide quoted text -- Show quoted text -
>
>