Belkin Wirless -- Adsl 2 + modem with Wireless G Plus Mimo Router F5D-9630-4

Help or Advice Needed Please


I have recently purchased and setup my new Belkin Modem Router Model
F5D9630-4 It works extremely well giving me a far greater wireless
connection range.- ------ But can anybody tell me is it normal with this
model for the Wireless light 6th from left to blink very fast continuously
regardless of a wireless network running or not. Even with all wirless links
disabled and the Lan connection and ADSL plugs removed/disconnected it
continues to blink at a rate of 6/10 blinks a second
Thanks Glenn




Glenn

Mine too flashes like mad

I tried belkins help and got nowhere

I phoned Technical help about this and other matters (see later) and
was effectively told "so what" and "who cares" it apparently means
nothing and often happens.

oddly enough it still flashes madly when the Wireless ability is turned
Off - this makes no sense.

I also have problems with it dropping me off the net - annoying when in
an auction on ebay - again I got no joy except to be emailed by belkin
telling me that it was set up wrongly and I had to change all of the
settings to Exactly what I had already set them to - just another
example of a company not actually reading the query properly.


out of interest - as you have the 9630 -- what is the part number of
the power supply? (printed on the power supply label) --- I've forgotten
which of the dozen or so PSUs around me, which one came with it.

malcolm


------------------------------------------------------------------------
View this thread: http://www.wirelessforums.org/showthread.php?t=11207
http://www.wirelessforums.org

I have just bought one of these to upgrade my router, however i have
currently had an older F5D7630, which has proved to be a reliable
workhorse until now, which i need the longer range wireless capabilities
the new one has to offer.

My problem isn't exactly wireless, however it will not, under any
circumstances detect an ADSL connection. my old router works perfectly,
and even with exactly the same details entered, it still wont get that
ADSL signal. I thought something was askew, so i asked a friend (who is
BT engineer) to test my line, at my house, he said it was perfect, 4mb
max, which is good for where i live. i was on the phone to belkin
"technical" support, to be talked to by a very grumpy and ignorant
"engineer", for 2hrs. He said the line was faulty, then the filter was
faulty, then said i hadnt set it up right. I have been a hardware
engineer for 12years now, all certified MCP, Cisco Certified, A+,
Network+, Security+, and i am currently training for BT. After
basically making out that i was stupid, he said bring it back to the
vendor.

I did, today i went back to the store where i bought it, and explained
what had happened, and they happily replaced it for me, and even offered
me a better one, however when the fella went to check, the next one up
was sold out. i thanked them very much, and went home to try it out.

After having the correct setting put in, after i got bt to email me my
basic and advanced network router settings (username, password, VPI,
VCI, MTU....) i tried it and it restarted, and after 8hours of trying to
find a line, i gave up and plugged my old router in, which found the
line in 15-20 seconds. any ideas out there? am really stumped! surely
2 units couldnt be faulty?


------------------------------------------------------------------------
View this thread: http://www.wirelessforums.org/showthread.php?t=11207
http://www.wirelessforums.org