Multi Homed and Terminal Services

Hello, and thanks for you assistance in advanced. I have a multihomed
server, one inside IP and once outside IP and Terminal Services in Admin mode
will only connect to the outside ip. Is there a way to setup so it will only
connect to the inside IP?

Thanks Again.


TJ

Sure, enable NAT and block outside access.

NAT and Firewall In the Select Routing Protocol dialog box, click NAT/Firewall, ... Symptoms: You have windows 2003 multihomed server with DNS and NAT/Firewall. ...
www.chicagotech.net/nat.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"TJ" <(E-Mail Removed)> wrote in message news:7025F849-3C23-42D5-8F8B-(E-Mail Removed)...
Hello, and thanks for you assistance in advanced. I have a multihomed
server, one inside IP and once outside IP and Terminal Services in Admin mode
will only connect to the outside ip. Is there a way to setup so it will only
connect to the inside IP?

Thanks Again.

Hi!

Do you want to connect to "outside" or "inside" adapter? Either way you can
select the appropriate adapter in Terminal Services Configuration tool,
right click RDP-TCP connection, select Properties, select Network tab.

Toni

"TJ" <(E-Mail Removed)> wrote in message
news:7025F849-3C23-42D5-8F8B-(E-Mail Removed)...
> Hello, and thanks for you assistance in advanced. I have a multihomed
> server, one inside IP and once outside IP and Terminal Services in Admin
> mode
> will only connect to the outside ip. Is there a way to setup so it will
> only
> connect to the inside IP?
>
> Thanks Again.

Thanks Guys, that worked........Much appreciated. Cant believe I missed that.

"T. Uranjek" wrote:

> Hi!
>
> Do you want to connect to "outside" or "inside" adapter? Either way you can
> select the appropriate adapter in Terminal Services Configuration tool,
> right click RDP-TCP connection, select Properties, select Network tab.
>
> Toni
>
> "TJ" <(E-Mail Removed)> wrote in message
> news:7025F849-3C23-42D5-8F8B-(E-Mail Removed)...
> > Hello, and thanks for you assistance in advanced. I have a multihomed
> > server, one inside IP and once outside IP and Terminal Services in Admin
> > mode
> > will only connect to the outside ip. Is there a way to setup so it will
> > only
> > connect to the inside IP?
> >
> > Thanks Again.
>
>
>