How do I set-up static IP

I want to switch from DHCP to static IP on my home network using
WinXP SP2 on 2 machines and a Linksys BEFSR41 router? I also
have a Linksys WAP11 and a TiVo hardwired to the router. The
WAP11 connects to another TiVo.

Thanks

--


Travis in Shoreline Washington



Travis M.

From: "Travis M." <(E-Mail Removed)>

| I want to switch from DHCP to static IP on my home network using
| WinXP SP2 on 2 machines and a Linksys BEFSR41 router? I also
| have a Linksys WAP11 and a TiVo hardwired to the router. The
| WAP11 connects to another TiVo.
|
| Thanks
|

Using IPCONFIG...
Write down all settings for each PC. Then manually set the static IP values on the PCs to
match what was written down. When done either turn off DHCP on the Linksys Router or change
the start address to an address higher then the statically set addresses.


--
Dave
http://www.claymania.com/removal-trojan-adware.html
http://www.ik-cs.com/got-a-virus.htm

"David H. Lipman" <DLipman~nospam~@Verizon.Net> wrote in message
news:YgETg.6703$Oh3.3220@trnddc04
> From: "Travis M." <(E-Mail Removed)>
>
> > I want to switch from DHCP to static IP on my home network
> > using
> > WinXP SP2 on 2 machines and a Linksys BEFSR41 router? I also
> > have a Linksys WAP11 and a TiVo hardwired to the router. The
> > WAP11 connects to another TiVo.
> >
> > Thanks
> >
>
> Using IPCONFIG...
> Write down all settings for each PC. Then manually set the
> static
> IP values on the PCs to match what was written down. When done
> either turn off DHCP on the Linksys Router or change the start
> address to an address higher then the statically set addresses.

Thanks Dave.

--


Travis in Shoreline Washington