DLINK DGL-4300 anf Fujitsu Speedport problem

Hello!!!

First, I have an original Verizon DSL setup (circa 1997) with the old
Fujitsu Speedport Modem. Currently, it is hooked up to a Linksys WRT54G
wireless router.

Using up to four PC's and everything worked fine.

Lately the router has been acting up (internet traffic slows down over
time)... Resetting the router seems to fix the problem.

So, I bought a new router, the D-Link DGL-4300. Got some good reviews plus I
want to use the gamefuel tech. (wife and I play WoW while the kids do their
IM thing).

When I hooked it up I get no internet access at all. I can access the router
and made all the appropriate security changes. But the router, in the status
page, doesn't seem to be able to communicate and configure the DCHP (gets
the message Please Wait...)

DLINK was no help at all, insisting I switch to PPPoE even though my modem
doesn't support that. They suggested I call verizon and get my modem changed
to 'Bridge'

Hooked up the old router and everything appears to be working fine.

Is there some default setting I am missing here or is my tech just old
school and I am SOL?

Thanks!

D




Ya Sure Ya Betcha

"Ya Sure Ya Betcha" <(E-Mail Removed)> wrote in message
news:ScEOg.64$W13.16@trnddc05...
> Hello!!!
>
> First, I have an original Verizon DSL setup (circa 1997) with
> the old Fujitsu Speedport Modem. Currently, it is hooked up to
> a Linksys WRT54G wireless router.
>
> Using up to four PC's and everything worked fine.
>
> Lately the router has been acting up (internet traffic slows
> down over time)... Resetting the router seems to fix the
> problem.
>
> So, I bought a new router, the D-Link DGL-4300. Got some good
> reviews plus I want to use the gamefuel tech. (wife and I play
> WoW while the kids do their IM thing).
>
> When I hooked it up I get no internet access at all. I can
> access the router and made all the appropriate security
> changes. But the router, in the status page, doesn't seem to be
> able to communicate and configure the DCHP (gets the message
> Please Wait...)
>
> DLINK was no help at all, insisting I switch to PPPoE even
> though my modem doesn't support that. They suggested I call
> verizon and get my modem changed to 'Bridge'
>
> Hooked up the old router and everything appears to be working
> fine.
>
> Is there some default setting I am missing here or is my tech
> just old school and I am SOL?

Release and Renew.

--


Travis in Shoreline Washington

"Travis M." <(E-Mail Removed)> wrote in message
news:MJNOg.138$W13.0@trnddc05...
>
> "Ya Sure Ya Betcha" <(E-Mail Removed)> wrote in message
> news:ScEOg.64$W13.16@trnddc05...
>> Hello!!!
>>
>> First, I have an original Verizon DSL setup (circa 1997) with the old
>> Fujitsu Speedport Modem. Currently, it is hooked up to a Linksys WRT54G
>> wireless router.
>>
>> Using up to four PC's and everything worked fine.
>>
>> Lately the router has been acting up (internet traffic slows down over
>> time)... Resetting the router seems to fix the problem.
>>
>> So, I bought a new router, the D-Link DGL-4300. Got some good reviews
>> plus I want to use the gamefuel tech. (wife and I play WoW while the kids
>> do their IM thing).
>>
>> When I hooked it up I get no internet access at all. I can access the
>> router and made all the appropriate security changes. But the router, in
>> the status page, doesn't seem to be able to communicate and configure the
>> DCHP (gets the message Please Wait...)
>>
>> DLINK was no help at all, insisting I switch to PPPoE even though my
>> modem doesn't support that. They suggested I call verizon and get my
>> modem changed to 'Bridge'
>>
>> Hooked up the old router and everything appears to be working fine.
>>
>> Is there some default setting I am missing here or is my tech just old
>> school and I am SOL?
>
> Release and Renew.
>
> --
>
>
> Travis in Shoreline Washington

The Relese and Renew buttons in the router config are greyed out. Should I
tru the Relese and renew through IPCONFIG?

"Ya Sure Ya Betcha" <(E-Mail Removed)> wrote in message
news:cI2Pg.266$uj3.264@trnddc08...
>
> "Travis M." <(E-Mail Removed)> wrote in message
> news:MJNOg.138$W13.0@trnddc05...
>>
>> "Ya Sure Ya Betcha" <(E-Mail Removed)> wrote in message
>> news:ScEOg.64$W13.16@trnddc05...
>>> Hello!!!
>>>
>>> First, I have an original Verizon DSL setup (circa 1997) with
>>> the old Fujitsu Speedport Modem. Currently, it is hooked up
>>> to a Linksys WRT54G wireless router.
>>>
>>> Using up to four PC's and everything worked fine.
>>>
>>> Lately the router has been acting up (internet traffic slows
>>> down over time)... Resetting the router seems to fix the
>>> problem.
>>>
>>> So, I bought a new router, the D-Link DGL-4300. Got some good
>>> reviews plus I want to use the gamefuel tech. (wife and I
>>> play WoW while the kids do their IM thing).
>>>
>>> When I hooked it up I get no internet access at all. I can
>>> access the router and made all the appropriate security
>>> changes. But the router, in the status page, doesn't seem to
>>> be able to communicate and configure the DCHP (gets the
>>> message Please Wait...)
>>>
>>> DLINK was no help at all, insisting I switch to PPPoE even
>>> though my modem doesn't support that. They suggested I call
>>> verizon and get my modem changed to 'Bridge'
>>>
>>> Hooked up the old router and everything appears to be working
>>> fine.
>>>
>>> Is there some default setting I am missing here or is my tech
>>> just old school and I am SOL?
>>
>> Release and Renew.
>>
>> --
>>
>>
>> Travis in Shoreline Washington
>
> The Relese and Renew buttons in the router config are greyed
> out. Should I tru the Relese and renew through IPCONFIG?

Verizon has a "Renew" utility. If you like I can post it to the
0.verizon.binaries newsgroup.

--


Travis in Shoreline Washington

"Travis M." <(E-Mail Removed)> wrote in message
news:mi6Pg.2456$4C1.754@trnddc03...
>
> "Ya Sure Ya Betcha" <(E-Mail Removed)> wrote in message
> news:cI2Pg.266$uj3.264@trnddc08...
>>
>> "Travis M." <(E-Mail Removed)> wrote in message
>> news:MJNOg.138$W13.0@trnddc05...
>>>
>>> "Ya Sure Ya Betcha" <(E-Mail Removed)> wrote in message
>>> news:ScEOg.64$W13.16@trnddc05...
>>>> Hello!!!
>>>>
>>>> First, I have an original Verizon DSL setup (circa 1997) with the old
>>>> Fujitsu Speedport Modem. Currently, it is hooked up to a Linksys WRT54G
>>>> wireless router.
>>>>
>>>> Using up to four PC's and everything worked fine.
>>>>
>>>> Lately the router has been acting up (internet traffic slows down over
>>>> time)... Resetting the router seems to fix the problem.
>>>>
>>>> So, I bought a new router, the D-Link DGL-4300. Got some good reviews
>>>> plus I want to use the gamefuel tech. (wife and I play WoW while the
>>>> kids do their IM thing).
>>>>
>>>> When I hooked it up I get no internet access at all. I can access the
>>>> router and made all the appropriate security changes. But the router,
>>>> in the status page, doesn't seem to be able to communicate and
>>>> configure the DCHP (gets the message Please Wait...)
>>>>
>>>> DLINK was no help at all, insisting I switch to PPPoE even though my
>>>> modem doesn't support that. They suggested I call verizon and get my
>>>> modem changed to 'Bridge'
>>>>
>>>> Hooked up the old router and everything appears to be working fine.
>>>>
>>>> Is there some default setting I am missing here or is my tech just old
>>>> school and I am SOL?
>>>
>>> Release and Renew.
>>>
>>> --
>>>
>>>
>>> Travis in Shoreline Washington
>>
>> The Relese and Renew buttons in the router config are greyed out. Should
>> I tru the Relese and renew through IPCONFIG?
>
> Verizon has a "Renew" utility. If you like I can post it to the
> 0.verizon.binaries newsgroup.
>
> --
>
>
> Travis in Shoreline Washington

Cool Thanks.. This old router is ticking me off.. gotta reboot it hourly to
maintain Data Rate.

"Ya Sure Ya Betcha" <(E-Mail Removed)> wrote in message
newscmPg.6901$2P3.614@trnddc02
> "Travis M." <(E-Mail Removed)> wrote in message
> news:mi6Pg.2456$4C1.754@trnddc03...
> >
> > "Ya Sure Ya Betcha" <(E-Mail Removed)> wrote in message
> > news:cI2Pg.266$uj3.264@trnddc08...
> > >
> > > "Travis M." <(E-Mail Removed)> wrote in
> > > message
> > > news:MJNOg.138$W13.0@trnddc05...
> > > >
> > > > "Ya Sure Ya Betcha" <(E-Mail Removed)> wrote in message
> > > > news:ScEOg.64$W13.16@trnddc05...
> > > > > Hello!!!
> > > > >
> > > > > First, I have an original Verizon DSL setup (circa
> > > > > 1997)
> > > > > with the old Fujitsu Speedport Modem. Currently, it is
> > > > > hooked up to a Linksys WRT54G wireless router.
> > > > >
> > > > > Using up to four PC's and everything worked fine.
> > > > >
> > > > > Lately the router has been acting up (internet traffic
> > > > > slows down over time)... Resetting the router seems to
> > > > > fix
> > > > > the problem. So, I bought a new router, the D-Link
> > > > > DGL-4300. Got some
> > > > > good reviews plus I want to use the gamefuel tech.
> > > > > (wife
> > > > > and I play WoW while the kids do their IM thing).
> > > > >
> > > > > When I hooked it up I get no internet access at all. I
> > > > > can
> > > > > access the router and made all the appropriate security
> > > > > changes. But the router, in the status page, doesn't
> > > > > seem
> > > > > to be able to communicate and configure the DCHP (gets
> > > > > the
> > > > > message Please Wait...) DLINK was no help at all,
> > > > > insisting I switch to PPPoE even
> > > > > though my modem doesn't support that. They suggested I
> > > > > call
> > > > > verizon and get my modem changed to 'Bridge'
> > > > >
> > > > > Hooked up the old router and everything appears to be
> > > > > working fine. Is there some default setting I am
> > > > > missing here or is my
> > > > > tech just old school and I am SOL?
> > > >
> > > > Release and Renew.
> > > >
> > > > --
> > > >
> > > >
> > > > Travis in Shoreline Washington
> > >
> > > The Relese and Renew buttons in the router config are
> > > greyed
> > > out. Should I tru the Relese and renew through IPCONFIG?
> >
> > Verizon has a "Renew" utility. If you like I can post it to
> > the
> > 0.verizon.binaries newsgroup.
> >
> > --
> >
> >
> > Travis in Shoreline Washington
>
> Cool Thanks.. This old router is ticking me off.. gotta reboot
> it
> hourly to maintain Data Rate.

I will post it this morning with the subject of "Verizon
release/renew.exe"

--


Travis in Shoreline Washington