Networking Forums  

Go Back   Networking Forums > Networking Newsgroups > Windows Server Networking

Port 1723

Reply
 
Thread Tools Display Modes
  #1  
Old 01-29-2006, 07:50 PM
Default Port 1723



I have a 2k3 network with 4 computers.I go to my router page and have
port 1723 as shown below:
Pinhole Name VPN-1
Protocol Select TCP
External Port Start 1723
External Port End 1723
Internal IP Address 70.246.3.201
Internal Port 1723

But when I go to canyouseeme.org , it says the port is blocked. I can
have a vpn connection from the computers behind the router, but remote
computers get Error 678. I would really appreciate any input on this.



john
Reply With Quote
  #2  
Old 01-29-2006, 10:08 PM
Robert L [MS-MVP]
Guest
 
Posts: n/a
Default Re: Port 1723

If Internal IP Address is 70.246.3.201, what's your WAN IP? Or post the result of ipconfig /all here.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"john" <(E-Mail Removed)> wrote in message news:(E-Mail Removed) ups.com...
I have a 2k3 network with 4 computers.I go to my router page and have
port 1723 as shown below:
Pinhole Name VPN-1
Protocol Select TCP
External Port Start 1723
External Port End 1723
Internal IP Address 70.246.3.201
Internal Port 1723

But when I go to canyouseeme.org , it says the port is blocked. I can
have a vpn connection from the computers behind the router, but remote
computers get Error 678. I would really appreciate any input on this.

Reply With Quote
  #3  
Old 01-30-2006, 01:27 AM
john
Guest
 
Posts: n/a
Default Re: Port 1723

My Wan IP is 70.246.3.201 with 206 as gateway. My LAN Ip is
192.168.1.110 with no gateway.

Reply With Quote
  #4  
Old 01-31-2006, 12:59 PM
susantha silva
Guest
 
Posts: n/a
Default Re: Port 1723

John there is mistake over here. In the router you'll have to configure the
port forwarding to the internal ip which is 192.168.1.110 not the wan IP. So
when you tried to make a VPN connection from outside the wan ip will look at
the packet and then forward it to the correct port and then router will look
where it has to forward those packet to and find out it has to be send to
the internal server address which is 192.168.1.110. Hope this will solve
your problem. So when you configure port numbers always remember to open
them to the internal IP address not for the wan IP.

Regards,
Susantha
"john" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) oups.com...
> My Wan IP is 70.246.3.201 with 206 as gateway. My LAN Ip is
> 192.168.1.110 with no gateway.
>



Reply With Quote
Reply

Tags
1723, port

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 07:18 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.