D-Link DI-624

For a couple of days I have been having trouble with my router on my
Mac G4 , in the status pane I kept getting 'ethernet cable not
connected' flashing then a positive connection message. After resetting
the firmware and config a number of times I decided to try another
transformer and this seems to have solved the problem.

The original transformer was giving a volt reading dropping .1 < .2
volt every second or two.

Hope this helps some of you.



solinus

Correction to the above,
after a day problems returned. Di-Link sites show differing firmware
fot the DI-624 B model, having tried two I have now gone back to the
2004 version and can connect to the net but the wireless section is out!