|
||||||||
|
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
|
Hey all I have a netgear router working fine on a cable connection,
went to share DSL the uplink port shows activity and the computers see eachother on the LAN but i have no internet access. I cannout login to the router (192.168.1.1) nor view the web. DSL connection works fine when plugged in directly. I reset the router prior to the DSL installation so its not an old config problem. All help appreciated --proph3t proph3t |
|
#2
|
|||
|
|||
|
proph3t wrote:
> Hey all I have a netgear router working fine on a cable connection, > went to share DSL the uplink port shows activity and the computers see > eachother on the LAN but i have no internet access. I cannout login to > the router (192.168.1.1) nor view the web. DSL connection works fine > when plugged in directly. > > I reset the router prior to the DSL installation so its not an old > config problem. > > All help appreciated > > --proph3t > Are you sure the router's IP is 192.168.1.1 ? In some cases the factory settings are 192.168.0.1... or something else, according to the user manual. If the router was set to attribute addresses in another range and your computer is set to use a fixed IP, also put it in DHCP mode. What do you mean "reset the router". Reboot ? Or reset to factory default ? If the computer connected to the router is in DHCP mode, does it get an IP ? Check the details and see what the "default gateway" is... Also disable any firewall on the computer connected to the router, although it should't be a problem since the router probably has an HTML configuration interface on port 80. HTH Lorenzo |
|
#3
|
|||
|
|||
|
The routers WAN port is defined as the default gateway, also i mean
restore factory settings when i say reboot. 192.168.1.1 is the ip of the router as it is listed on the back of the device |
![]() |
| Tags |
| internet, log, router, share |
| Thread Tools | |
| Display Modes | |
|
|