Linksys WRT54G Router Problem

I recently purchased a Linksys WRT54G v5 wireless router because my old
WRT54G v1 died. Hook it up to my cable modem and it's not getting an
IP from the DHCP server of the cable company. I've tried almost
everything. Clone MAC address of the NIC, power everything down
overnight, different cat 5 cable, upgrade the firmware, return and get
another router.....etc. The only way I can use the new router is to
set a static IP address for the WAN port using the dynamic IP I got
from the DHCP server. If I connect the PC directly to the cable modem,
the PC receives the IP instantly. Does anyone have any suggestions?



j91780@yahoo.com

On 17 Nov 2005 12:01:24 -0800, "(E-Mail Removed)" <(E-Mail Removed)>
wrote:

>I recently purchased a Linksys WRT54G v5 wireless router because my old
>WRT54G v1 died. Hook it up to my cable modem and it's not getting an
>IP from the DHCP server of the cable company. I've tried almost
>everything. Clone MAC address of the NIC, power everything down
>overnight, different cat 5 cable, upgrade the firmware, return and get
>another router.....etc. The only way I can use the new router is to
>set a static IP address for the WAN port using the dynamic IP I got
>from the DHCP server. If I connect the PC directly to the cable modem,
>the PC receives the IP instantly. Does anyone have any suggestions?

Weird.

It sure sounds like you have the cable modem plugged into the LAN port
on the WRT54G instead of the WAN port. You sound like you know what
you're doing but please double check anyway.

Cloning the PC IP address won't do much, especially if you are able to
connect directly. It might be possible to clone the MAC address of
the defunct WRT54Gv1 router.

Did you power cycle the modem every time you made a major change to
the MAC address on the router? You gotta do both.

Incidentally, borrowing the dynamic IP address from the direct PC
connection will only work if the MAC address of the WAN port on the
router is the same as the PC, which requires cloning.

Can you borrow a different model router and see if it's something
unique to the Linksys WRT54G v5? I wouldn't be suprised if it was.

--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

Went back to the store. Returned the Linksys router and get a NetGear
router. Works just fine. Don't know what to say about Linksys except
for don't buy it.............

Jeff Liebermann wrote:
> On 17 Nov 2005 12:01:24 -0800, "(E-Mail Removed)" <(E-Mail Removed)>
> wrote:
>
> >I recently purchased a Linksys WRT54G v5 wireless router because my old
> >WRT54G v1 died. Hook it up to my cable modem and it's not getting an
> >IP from the DHCP server of the cable company. I've tried almost
> >everything. Clone MAC address of the NIC, power everything down
> >overnight, different cat 5 cable, upgrade the firmware, return and get
> >another router.....etc. The only way I can use the new router is to
> >set a static IP address for the WAN port using the dynamic IP I got
> >from the DHCP server. If I connect the PC directly to the cable modem,
> >the PC receives the IP instantly. Does anyone have any suggestions?
>
> Weird.
>
> It sure sounds like you have the cable modem plugged into the LAN port
> on the WRT54G instead of the WAN port. You sound like you know what
> you're doing but please double check anyway.
>
> Cloning the PC IP address won't do much, especially if you are able to
> connect directly. It might be possible to clone the MAC address of
> the defunct WRT54Gv1 router.
>
> Did you power cycle the modem every time you made a major change to
> the MAC address on the router? You gotta do both.
>
> Incidentally, borrowing the dynamic IP address from the direct PC
> connection will only work if the MAC address of the WAN port on the
> router is the same as the PC, which requires cloning.
>
> Can you borrow a different model router and see if it's something
> unique to the Linksys WRT54G v5? I wouldn't be suprised if it was.
>
> --
> Jeff Liebermann (E-Mail Removed)
> 150 Felker St #D http://www.LearnByDestroying.com
> Santa Cruz CA 95060 http://802.11junk.com
> Skype: JeffLiebermann AE6KS 831-336-2558

I've been working thru a similar issue with a new WRT54G v5. I only
get the correct IP, Default Gateway and DNS Servers if I power cycle
the router, & then it loses connection several times a day. Bypassing
the router with a direct connection works fine. I've upgraded the
firmware, taken the wireless connection out of the mix, set static IPs,
and reset the router -- always with the same results that require a
power cycle to correct. Linksys Support recommends the same steps,
ending with "In case that after doing so and still not solve the
problem, return the router to the retailer and have it replaced." I
plan to take that advise and replace it with another brand.