BEFW11S4 and WUSB54GS performance/connection problem

Hi,
I have the following setup BEFW11S4 V2 and WUSB54GS (USB G Speedster
adapter). The problem is that if I change Basic Rate setting on the
router to 11Mbps then adapter keeps flipping between connected at
11Mbps to no connection every 10-20 seconds or so. Switching to 2Mbps
for Basic Rate allows adapter to stay connected but the rate of course
is very low. Signal strenght is always exelent.
Any ideas?



Kostia

[POSTED TO alt.internet.wireless - REPLY ON USENET PLEASE]

In <(E-Mail Removed) .com> on 21 Oct 2005
22:24:21 -0700, "Kostia" <(E-Mail Removed)> wrote:

>I have the following setup BEFW11S4 V2 and WUSB54GS (USB G Speedster
>adapter). The problem is that if I change Basic Rate setting on the
>router to 11Mbps then adapter keeps flipping between connected at
>11Mbps to no connection every 10-20 seconds or so. Switching to 2Mbps
>for Basic Rate allows adapter to stay connected but the rate of course
>is very low. Signal strenght is always exelent.
>Any ideas?

Some source of interference. See:

"Minimizing 802.11 Interference Issues" at
<http://www.wi-fiplanet.com/tutorials/article.php/953511>.

"Stop the interference!"
<http://www.networkworld.com/columnists/2004/0816wizards.html>

--
Best regards, HELP FOR CINGULAR GSM & SONY ERICSSON PHONES:
John Navas <http://navasgrp.home.att.net/#Cingular>