What causes the NOISE in Signal to Noise?

Many times my connection will be lost and I'll check available ones, which
mine will be present. However, I am not able to connect to it and I'll see
that the noise is higher than the signal. Nothing is changing in my
apartment ... nothing is turned on or off. There is a 5.8Ghz phone near the
wireless modem, but that is not supposed to interfere.

The connection will stay off and then come back on sometimes ... other times
it seems repairing the connection works.

Anyone have an idea of what is going on?

Thanks,
John




John ©

John © wrote:

> Many times my connection will be lost and I'll check available ones, which
> mine will be present. However, I am not able to connect to it and I'll
> see
> that the noise is higher than the signal. Nothing is changing in my
> apartment ... nothing is turned on or off. There is a 5.8Ghz phone near
> the wireless modem, but that is not supposed to interfere.
>
> The connection will stay off and then come back on sometimes ... other
> times it seems repairing the connection works.
>
> Anyone have an idea of what is going on?
>
> Thanks,
> John

There are countless sources of electromagnetic radiation (it started with
the Big Bang) and most of them are outside of your apartment and beyond
your control. Try another channel.

Roby

(E-Mail Removed) (John ©) wrote in
news:QozMd.79008$(E-Mail Removed):

> There is a 5.8Ghz phone near the wireless modem, but that is not
> supposed to interfere.

Lots of things that aren't supposed to happen, happen nonetheless.

Consumer electronics products aren't designed to handle RF
interference particularly well, and even a low-powered signal can
really mess up nearby equipment, regardless of what frequency any of
it is supposed to operate on.

How near is "near"? My 2.4GHz AP sits next to my Dish Network
satellite receiver and sometimes interferes with the 800MHz remote
control circuit if the video cables get moved into just the wrong
position.

--
Bert Hyman | St. Paul, MN | (E-Mail Removed)