WDS not working on Linksys WRT54G w/ Satori

I looked at the tutorial for setting up WDS in the Sveasoft forms (See
this topic:
http://www.sveasoft.com/modules/phpB...ic.php?t=7655), but I
cannot get the WDS feature working. Here is how it's set up:

Gateway router:
LAN IP: 192.168.1.1
Wireless mode: AP
Wireless network mode: Mixed (B and G)
WDS Settings:
LAN [MAC of repeater router]
Lazy WDS (tried enabled and disabled, currently enabled)

Repeater router:
LAN IP: 192.168.1.50
Wireless mode: AP (Client mode works, but then the repeater cannot be
accessed wirelessly, which is no good)
Wireless network mode: Mixed (B and G)
WDS Settings:
LAN [MAC of gateway router]
Lazy WDS (tried enabled and disabled, currently enabled)

Both are using Satori 4.0 firmware. Both have WEP disabled, the same
SSID, and are on the same channel.
Any idea what else could be the problem?



Chris