Dlink DWL-2000AP+ only shows "Firmware Upgrade" screen

My DWL-2000AP+ has refused to work from the day I opened the box. The
web interface has always shown the 'Firmware Upgrade' screen. So I've
tried two firmware upgrades with the following versions from Dlinks
website...

dwl-2000ap+_Bx_fw_v200b19_nml.bin
DWL-2000AP+_Bx_FW_v210b27_nml.bin

....but on reboot I still get the 'Firmware Upgrade' screen whenever I
browse to the damn thing at 192.168.0.50

After a factory reset, running Ethereal Packet Analyser on a PC with
static IP 192.168.0.40 I can see that the firmware downloads OK to the
Access Point at 192.168.0.50, but after after that, the 2000AP+ is just
broadcasting "DHCP Discover" packets with source IP 0.0.0.0 from/to the
BOOTP ports 68/67. The only way to get anything from it thereafter is
with another Factory Reset.

I couldn't get through to Dlink customer support before Christmas (20
mins on hold each time), so - before I send it back in frustration - is
there anyone here with any suggestions?

Cheers,
Alfie.



AlfieNoakes@blueyonder.co.uk

On 27 Dec 2004 19:31:37 -0800, (E-Mail Removed) wrote:

>
>My DWL-2000AP+ has refused to work from the day I opened the box. The
>web interface has always shown the 'Firmware Upgrade' screen. So I've
>tried two firmware upgrades with the following versions from Dlinks
>website...
>
>dwl-2000ap+_Bx_fw_v200b19_nml.bin
>DWL-2000AP+_Bx_FW_v210b27_nml.bin
>
>...but on reboot I still get the 'Firmware Upgrade' screen whenever I
>browse to the damn thing at 192.168.0.50
>
>After a factory reset, running Ethereal Packet Analyser on a PC with
>static IP 192.168.0.40 I can see that the firmware downloads OK to the
>Access Point at 192.168.0.50, but after after that, the 2000AP+ is just
>broadcasting "DHCP Discover" packets with source IP 0.0.0.0 from/to the
>BOOTP ports 68/67. The only way to get anything from it thereafter is
>with another Factory Reset.

Ugh. Not good. Some ideas:

1. Clear your browser cache to make sure you're not loading from the
cache. If possible, try from a different computah.

2. Try going directly to the various web pages:
http://192.168.0.50/h_wizard.html
http://192.168.0.50/h_wireless.html
http://192.168.0.50/h_lan.html
http://192.168.0.50/h_dhcp.html
http://192.168.0.50/adv_mode.html
http://192.168.0.50/adv_perform.html
http://192.168.0.50/adv_filters.html
http://192.168.0.50/adv_802_1x.html
http://192.168.0.50/tools_admin.html
http://192.168.0.50/tools_system.html
http://192.168.0.50/tools_firmw.html
http://192.168.0.50/st_devic.html
http://192.168.0.50/st_log.html
http://192.168.0.50/st_stats.html
http://192.168.0.50/st_wireless.html
http://192.168.0.50/help_men.html
I fished these out of a DWL-900AP+ but it should be similar to the
DWL-2100AP+.


--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 AE6KS 831-336-2558

(E-Mail Removed) wrote:
> My DWL-2000AP+ has refused to work from the day I opened the box. The
> web interface has always shown the 'Firmware Upgrade' screen. So I've
> tried two firmware upgrades with the following versions from Dlinks
> website...
>
> dwl-2000ap+_Bx_fw_v200b19_nml.bin
> DWL-2000AP+_Bx_FW_v210b27_nml.bin
>
> ....but on reboot I still get the 'Firmware Upgrade' screen whenever I
> browse to the damn thing at 192.168.0.50
>
> After a factory reset, running Ethereal Packet Analyser on a PC with
> static IP 192.168.0.40 I can see that the firmware downloads OK to the
> Access Point at 192.168.0.50, but after after that, the 2000AP+ is just
> broadcasting "DHCP Discover" packets with source IP 0.0.0.0 from/to the
> BOOTP ports 68/67. The only way to get anything from it thereafter is
> with another Factory Reset.
>
> I couldn't get through to Dlink customer support before Christmas (20
> mins on hold each time), so - before I send it back in frustration - is
> there anyone here with any suggestions?
>
> Cheers,
> Alfie.
>
It is possible that you have purchased a defective device or what that
someone else has messed up and returned to the store prior to you
purchasing it. D-Link makes good products, at least that had been my
experience with them. Therefore, take the AP back to the store and
exchange it with another one....The DWL-2100AP is preferred. These
devices are not difficult to set up. Take care.