WIFI works in Adhoc, but not in "Infrastructure mode"

Hi

I have a weird WIFI.

I am running XP, and Realtek 8180.

I use the Realtek RtWLAN app, version 3.1.

I can connect to the wifi just fine when in ADHOC mode, and locked to
channel 6.

Most of the time I have about 74% signal strength, but sometimes it
drops to 10-15% for shorter periods of time - but ir does not drop the
connection when in ADHOC mode.

When I change to Infrastruture (which is what we run), I can sometimes
have connection for a few seconds, sometimes for a few minutes - and
then I loose the connection.

If I then change over to ADHOC modus again, I get a good and strong
signal right away.

Any idea of why I loose signal in Infrastructure modus, but run fine
in ADHOC?

/JJ


Jens Jakob Andersen

"Jens Jakob Andersen" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) om...
> Hi
>
> I have a weird WIFI.
>
> I am running XP, and Realtek 8180.
>
> I use the Realtek RtWLAN app, version 3.1.
>
> I can connect to the wifi just fine when in ADHOC mode, and locked
to
> channel 6.
>
> Most of the time I have about 74% signal strength, but sometimes it
> drops to 10-15% for shorter periods of time - but ir does not drop
the
> connection when in ADHOC mode.
>
> When I change to Infrastruture (which is what we run), I can
sometimes
> have connection for a few seconds, sometimes for a few minutes - and
> then I loose the connection.
>
> If I then change over to ADHOC modus again, I get a good and strong
> signal right away.
>
> Any idea of why I loose signal in Infrastructure modus, but run fine
> in ADHOC?


ADHOC is for PC to PC connection, do you have 2 pcs set to adhoc? If
so could be they are connecting to each other.

Since you are using a WLAN utility, make sure you have the windows xp
wireless checkbox (Let windows control my wireless connection)
unchecked. Also, try channel 1 or 11, maybe someone else in your area
is using ch 6.

Make sure

Enable IEEE 802.1x authentication for this network is DISABLED

Drop-outs/Other Wireless networks detected, will be a thing of the
past......

HubSwitch




"Airhead" <(E-Mail Removed)> wrote in message
news:41cee99e$0$22521$(E-Mail Removed) m...
>
> "Jens Jakob Andersen" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed) om...
> > Hi
> >
> > I have a weird WIFI.
> >
> > I am running XP, and Realtek 8180.
> >
> > I use the Realtek RtWLAN app, version 3.1.
> >
> > I can connect to the wifi just fine when in ADHOC mode, and locked
> to
> > channel 6.
> >
> > Most of the time I have about 74% signal strength, but sometimes it
> > drops to 10-15% for shorter periods of time - but ir does not drop
> the
> > connection when in ADHOC mode.
> >
> > When I change to Infrastruture (which is what we run), I can
> sometimes
> > have connection for a few seconds, sometimes for a few minutes - and
> > then I loose the connection.
> >
> > If I then change over to ADHOC modus again, I get a good and strong
> > signal right away.
> >
> > Any idea of why I loose signal in Infrastructure modus, but run fine
> > in ADHOC?
>
>
> ADHOC is for PC to PC connection, do you have 2 pcs set to adhoc? If
> so could be they are connecting to each other.
>
> Since you are using a WLAN utility, make sure you have the windows xp
> wireless checkbox (Let windows control my wireless connection)
> unchecked. Also, try channel 1 or 11, maybe someone else in your area
> is using ch 6.
>
>
>