Networking Forums  

Go Back   Networking Forums > Networking Newsgroups > Wireless Internet

ORiNOCO AP-600 b/g

Reply
 
Thread Tools Display Modes
  #1  
Old 09-30-2003, 02:06 AM
Default ORiNOCO AP-600 b/g



I just bought 2 pieces of ORiNOCO AP-600 b/g a few days ago. To test
this AP, I have it to transfer a very big file from on PC to another
PC through this AP. The test time was planned to be about 3 days.
Unfortunately, after about 48 hours test, this AP was burned out. The
power light is solid red, the user guide says the SDRAM test failure.
I test my 2nd ORiNOCO AP-600 b/g, again, after about 2 days later, it
burned out again. This time, all LED is solid amber, user guide says
bad bootloader image.


Any one had this experience before?


kc
Reply With Quote
  #2  
Old 09-30-2003, 10:59 AM
Happy
Guest
 
Posts: n/a
Default Re: ORiNOCO AP-600 b/g

Nope,
my six units, running without reset for past 5 months .....

"kc" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) om...
> I just bought 2 pieces of ORiNOCO AP-600 b/g a few days ago. To test
> this AP, I have it to transfer a very big file from on PC to another
> PC through this AP. The test time was planned to be about 3 days.
> Unfortunately, after about 48 hours test, this AP was burned out. The
> power light is solid red, the user guide says the SDRAM test failure.
> I test my 2nd ORiNOCO AP-600 b/g, again, after about 2 days later, it
> burned out again. This time, all LED is solid amber, user guide says
> bad bootloader image.
>
>
> Any one had this experience before?



Reply With Quote
  #3  
Old 09-30-2003, 03:32 PM
Johan Willems
Guest
 
Posts: n/a
Default Re: ORiNOCO AP-600 b/g

(E-Mail Removed) (kc) wrote:

> I just bought 2 pieces of ORiNOCO AP-600 b/g a few days ago. To test
> this AP, I have it to transfer a very big file from on PC to another
> PC through this AP. The test time was planned to be about 3 days.
> Unfortunately, after about 48 hours test, this AP was burned out. The
> power light is solid red, the user guide says the SDRAM test failure.
> I test my 2nd ORiNOCO AP-600 b/g, again, after about 2 days later, it
> burned out again. This time, all LED is solid amber, user guide says
> bad bootloader image.
>
>
> Any one had this experience before?


I have not seen any problems like this. My suggestion would be to return it
to the dealer and request a replacement unit.

Did you try to see what it shows on the serial port?

Regards,
Johan

Reply With Quote
Reply

Tags
ap600, b or g, orinoco

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 04:21 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.