Losing wireless capability when PC is off (Belkin F5D7630-4A)

Odd one this.

My Belkin F5D7630-4A Wireless Router/ADSL Modem has quite happily existed
for three weeks in a solely wireless environment, with both my Win2K laptops
happily connecting to it and providing lots of lovely wireless surfing.

Yesterday, having rebuilt it after a HDD crash, I decided to let my WinXP
Home desktop PC in on the action, not wirelessly - but by connecting a patch
cable from it to the router.

I made no configuration changes on the PC, and it happily worked straight
off on the internet through this wired connection.

But now I have a problem. The two wireless laptops can now only connect to
the wireless network when the PC is switched on! If the PC is switched on,
both it and the two wireless laptops will happily co-exist and be able to
use the internet connection. If the PC is off, the two laptops can still see
the wireless network, but cannot connect to it.

How can this be?? Any clues please!

David.




David Wright

Have you checked your router interface/maybe reset MAC addresses.

Regards Bri@n

"David Wright" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
Odd one this.

My Belkin F5D7630-4A Wireless Router/ADSL Modem has quite happily
existed
for three weeks in a solely wireless environment, with both my Win2K
laptops
happily connecting to it and providing lots of lovely wireless
surfing.

Yesterday, having rebuilt it after a HDD crash, I decided to let my
WinXP
Home desktop PC in on the action, not wirelessly - but by connecting a
patch
cable from it to the router.

I made no configuration changes on the PC, and it happily worked
straight
off on the internet through this wired connection.

But now I have a problem. The two wireless laptops can now only
connect to
the wireless network when the PC is switched on! If the PC is switched
on,
both it and the two wireless laptops will happily co-exist and be able
to
use the internet connection. If the PC is off, the two laptops can
still see
the wireless network, but cannot connect to it.

How can this be?? Any clues please!

David.

When all are connected, do a traceroute from one of the laptops and see
where it goes.
I don't know what causes it but I have seen some bizarre behaviour like
this before and it was completely independant of the router being used.

Two wired pcs through a cable connection. Neither were running anything
special but for some bizarre reason one of the PCs decided it was going to
act as a DHCP server and router for the other PC. To muddle it even more,
when that PC was off, the second PC would refuse to get a DHCP address from
the real DHCP server.

The solution? Well in the case above I gave the second PC static IP
addressing. Try that and see what happens.

--
Colin
*Drop DEAD from the email address to reply*

> The solution?

Thank you for all the help, but it turns out to be completely unrelated to
the PC - on the same day as this all packed up, I installed a wireless CCTV
camera in the babies bedroom (£40 from Woolworths) - and some interference
that must have caused! Have changed the wireless channel to something else,
and suddenly all back on track again, and a crystal clear pic on the CCTV to
boot.

Amazing why I hadn't thought it could conflict - just goes to show how
densely packed the spectrum is these days!

The reason I assumed I could only get the wireless to work when the PC was
on, comes from only sitting next to the PC and the router when trying the
wireless out, obviously close enough to make the signal work and avoid the
CCTV interference.

How obscure, but how refreshing to have fixed it myself!

D.