|
||||||||
|
|
#1
|
|
Hi,
I've just come back from holiday, when my PC was turned off, but the router was left on. I booted the PC, and all seemed fine. However, I now find that I can't access the configuration of the router - I typed the usual http://192.168.0.1 but instead of the usual logon screen, I get "the page cannot be displayed". This is the same from my wife's pc on the network too. I daren't reboot the router, as I may loose my connection altogether, and therefore my access to the net and newsgroups for help! I've connected to the router via a serial cable and discovered the firmware version is R2.21.002.06.b2t10uk. Any help much aprecciated, thanks, Martin Martin Thompson |
|
#2
|
|||
|
|||
|
Martin Thompson wrote:
> Hi, > I've just come back from holiday, when my PC was turned off, but the > router was left on. > I booted the PC, and all seemed fine. > However, I now find that I can't access the configuration of the > router - I typed the usual http://192.168.0.1 but instead of the > usual logon screen, I get "the page cannot be displayed". > This is the same from my wife's pc on the network too. > I daren't reboot the router, as I may loose my connection altogether, > and therefore my access to the net and newsgroups for help! > I've connected to the router via a serial cable and discovered the > firmware version is R2.21.002.06.b2t10uk. > Any help much aprecciated, thanks, > Martin Reboot it. Use a modem as back-up if it doesn't come back up. -- gbnews ((E-Mail Removed)) |
![]() |
| Tags |
| dlink, dsl504, logon, screen |
| Thread Tools | |
| Display Modes | |
|
|