|
||||||||
|
|
#1
|
|
Despite putting Cisco 803 back on EBay, I thought I'd have ago following
advice from Rob Morley and Lurch. Have got as far as finding the way of getting the break point and getting the following boot# set set baud =9600 set data-bits =8 set parity =none set stop-bits =1 set console-flags =0 set mac-address =0050.7307.C329 set unit-ip =10.200.40.65 set serv-ip =255.255.255.255 set netmask =255.255.252.0 set gate-ip =10.200.40.1 set pkt-timeout =8 set tftp-timeout =16 set boot-action =flash set file-name ="c800-nsy6-mw.122-10b.bin" set watchdog =off set prompt ="boot" set ios-conf =0x2102 unfortunately setting ios-conf to 141 or 142 and then typing boot at the boot# prompt results in "no such file" both times trevor.appleton |
|
#2
|
|||
|
|||
|
In article <K_Roc.1141$So1.844@newsfe1-win>, "trevor.appleton"
(E-Mail Removed) says... > Despite putting Cisco 803 back on EBay, I thought I'd have ago following > advice from Rob Morley and Lurch. > > Have got as far as finding the way of getting the break point and getting > the following > > boot# set > set baud =9600 > set data-bits =8 > set parity =none > set stop-bits =1 > set console-flags =0 > set mac-address =0050.7307.C329 > set unit-ip =10.200.40.65 > set serv-ip =255.255.255.255 > set netmask =255.255.252.0 > set gate-ip =10.200.40.1 > set pkt-timeout =8 > set tftp-timeout =16 > set boot-action =flash > set file-name ="c800-nsy6-mw.122-10b.bin" > set watchdog =off > set prompt ="boot" > set ios-conf =0x2102 > > > unfortunately setting ios-conf to 141 or 142 and then typing boot at the > boot# > prompt results in "no such file" both times > Whoops - time to find a proper Cisco expert, I think :-( |
|
#3
|
|||
|
|||
|
"Rob Morley" <(E-Mail Removed)> wrote in message news:(E-Mail Removed) t... > In article <K_Roc.1141$So1.844@newsfe1-win>, "trevor.appleton" > (E-Mail Removed) says... > > Despite putting Cisco 803 back on EBay, I thought I'd have ago following > > advice from Rob Morley and Lurch. > > > > Have got as far as finding the way of getting the break point and getting > > the following > > > > boot# set > > set baud =9600 > > set data-bits =8 > > set parity =none > > set stop-bits =1 > > set console-flags =0 > > set mac-address =0050.7307.C329 > > set unit-ip =10.200.40.65 > > set serv-ip =255.255.255.255 > > set netmask =255.255.252.0 > > set gate-ip =10.200.40.1 > > set pkt-timeout =8 > > set tftp-timeout =16 > > set boot-action =flash > > set file-name ="c800-nsy6-mw.122-10b.bin" > > set watchdog =off > > set prompt ="boot" > > set ios-conf =0x2102 > > > > > > unfortunately setting ios-conf to 141 or 142 and then typing boot at the > > boot# > > prompt results in "no such file" both times > > > Whoops - time to find a proper Cisco expert, I think :-( Oh no! |
|
#4
|
|||
|
|||
|
On Fri, 14 May 2004 20:31:53 +0100, in uk.comp.home-networking "Trevor
Appleton" <(E-Mail Removed)> strung together this: >> Whoops - time to find a proper Cisco expert, I think :-( > I know one of those, possibly. >Oh no! > Unfortunately yes! -- SJW A.C.S. Ltd. |
|
#5
|
|||
|
|||
|
"Lurch" <(E-Mail Removed)> wrote in message news:40a520b3.679587915@195.129.110.67... > On Fri, 14 May 2004 20:31:53 +0100, in uk.comp.home-networking "Trevor > Appleton" <(E-Mail Removed)> strung together > this: > > >> Whoops - time to find a proper Cisco expert, I think :-( > > > I know one of those, possibly. > Yes yes? |
|
#6
|
|||
|
|||
|
On Sat, 15 May 2004 04:16:53 +0100, "Trevor Appleton"
<(E-Mail Removed)> wrote: > >"Lurch" <(E-Mail Removed)> wrote in message >news:40a520b3.679587915@195.129.110.67... >> On Fri, 14 May 2004 20:31:53 , in uk.comp.home-networking "Trevor >> Appleton" <(E-Mail Removed)> strung together >> this: >> >> >> Whoops - time to find a proper Cisco expert, I think :-( >> > >> I know one of those, possibly. >> > > >Yes yes? > I know a few Cisco trainers if that would help? T i m |
|
#7
|
|||
|
|||
|
"T i m" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)... > On Sat, 15 May 2004 04:16:53 +0100, "Trevor Appleton" > <(E-Mail Removed)> wrote: > > > > >"Lurch" <(E-Mail Removed)> wrote in message > >news:40a520b3.679587915@195.129.110.67... > >> On Fri, 14 May 2004 20:31:53 , in uk.comp.home-networking "Trevor > >> Appleton" <(E-Mail Removed)> strung together > >> this: > >> > >> >> Whoops - time to find a proper Cisco expert, I think :-( > >> > > >> I know one of those, possibly. > >> > > > > > >Yes yes? > > > I know a few Cisco trainers if that would help? > > Whats a Cisco Trainer? |
|
#8
|
|||
|
|||
|
On Sat, 15 May 2004 04:16:53 +0100, in uk.comp.home-networking "Trevor
Appleton" <(E-Mail Removed)> strung together this: > >"Lurch" <(E-Mail Removed)> wrote in message >news:40a520b3.679587915@195.129.110.67... >> On Fri, 14 May 2004 20:31:53 +0100, in uk.comp.home-networking "Trevor >> Appleton" <(E-Mail Removed)> strung together >> this: >> >> >> Whoops - time to find a proper Cisco expert, I think :-( >> > >> I know one of those, possibly. > >Yes yes? I'll ask the question next time I speak to her. Problem is, she'll want me to finish refitting the kitchen if I ring her up straight away, won't be an instant response! -- SJW A.C.S. Ltd. |
|
#9
|
|||
|
|||
|
"Lurch" <(E-Mail Removed)> wrote in message news:40a698db.4831016@195.129.110.67... > On Sat, 15 May 2004 04:16:53 +0100, in uk.comp.home-networking "Trevor > Appleton" <(E-Mail Removed)> strung together > this: > > > > >"Lurch" <(E-Mail Removed)> wrote in message > >news:40a520b3.679587915@195.129.110.67... > >> On Fri, 14 May 2004 20:31:53 +0100, in uk.comp.home-networking "Trevor > >> Appleton" <(E-Mail Removed)> strung together > >> this: > >> > >> >> Whoops - time to find a proper Cisco expert, I think :-( > >> > > >> I know one of those, possibly. > > > >Yes yes? > > I'll ask the question next time I speak to her. Problem is, she'll > want me to finish refitting the kitchen if I ring her up straight > away, won't be an instant response! > -- Tread lightly there boy! |
|
#10
|
|||
|
|||
|
On Sat, 15 May 2004 20:32:12 +0100, "Trevor Appleton"
<(E-Mail Removed)> wrote: >> >> >> >> >> Whoops - time to find a proper Cisco expert, I think :-( >> >> > >> >> I know one of those, possibly. >> >> >> > >> > >> >Yes yes? >> > >> I know a few Cisco trainers if that would help? > >Whats a Cisco Trainer? Erm, someone who takes someone through to be Cisco certified engineer (CCNA an that)? Like a 'fitness trainer' but without the steriods? All the best .. T i m (I offered access to a 'Trainer' as a solution as they are often better equipped re explaining the steps (rather than just doing it) and / or have access to training material?) |
![]() |
| Tags |
| cisco, kid |
| Thread Tools | |
| Display Modes | |
|
|