Chasing walls

Alright peeps,
Following on from the running cables under floors thread I have a few
questions about cables in walls.

How deep should you chase the wall. Is plaster depth good enough or should
you really go deeper? ie: into brick.

How far away from other cables and pipes one should your have your Cat5e?

Does having the cable in the walls degrade the performance?

Britman
Clan - http://www.alphasiege.co.uk


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.515 / Virus Database: 313 - Release Date: 01/09/2003




Britman

In article <6dE6b.33877$(E-Mail Removed)>,
(E-Mail Removed) says...
> Alright peeps,
> Following on from the running cables under floors thread I have a few
> questions about cables in walls.
>
> How deep should you chase the wall. Is plaster depth good enough or should
> you really go deeper? ie: into brick.

Depends how thick your plaster is - you probably want a quarter inch of
plaster over the conduit to prevent cracking in the future although you
might get away with less. Remember you should only run horizontally or
vertically, and cat5 doesn't like sharp bends. I guess you could get
away with laying the cable bare, as it's not really a safety issue, in
which case you'll need a smaller chase, but it's not recommended.

> How far away from other cables and pipes one should your have your Cat5e?

Minimum six inches from power cables, preferably more if they're running
parallel for any distance.

> Does having the cable in the walls degrade the performance?

It shouldn't make any difference (until you stick a nail through it when
you're hanging a picture).

neil wrote:
> Go wireless lot less bother
>
Not if you are redecorating anyway , and it costs a good deal more for lower
performance.
--
Alex

"We are now up against live, hostile targets"

"So, if Nick LeLievre should show up with computer parts and a promise
, I expect you to chin the bitch! "

www.drzoidberg.co.uk