MN-700 Setup

Trying to setup MN-700 Base Station. Run setup CD but
after it installs software and says click "Next" to set
up the hardware, that never happens. The wizard closes
and therefore I can't setup the base station. Running
Windows XP and have uninstalled Antivirus and have XP
firewall off. Help !!


John

>-----Original Message-----
>Trying to setup MN-700 Base Station. Run setup CD but
>after it installs software and says click "Next" to set
>up the hardware, that never happens. The wizard closes
>and therefore I can't setup the base station. Running
>Windows XP and have uninstalled Antivirus and have XP
>firewall off. Help !!
>.
>same prob

See if you can go into 192.168.2.1 in your browser without using the rest of
the frontend software. The default password is "admin" without the quotes.
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

<(E-Mail Removed)> wrote in message
news:149db01c3f906$79a98a60$(E-Mail Removed)...
>
> >-----Original Message-----
> >Trying to setup MN-700 Base Station. Run setup CD but
> >after it installs software and says click "Next" to set
> >up the hardware, that never happens. The wizard closes
> >and therefore I can't setup the base station. Running
> >Windows XP and have uninstalled Antivirus and have XP
> >firewall off. Help !!
> >.
> >same prob

I see Loading Configuration Wizard, then nothing.

I tried copying all the files to the laptop and running
setup from there but same result. It just stops and never
completes the install.


>-----Original Message-----
>
>>-----Original Message-----
>>Trying to setup MN-700 Base Station. Run setup CD but
>>after it installs software and says click "Next" to set
>>up the hardware, that never happens. The wizard closes
>>and therefore I can't setup the base station. Running
>>Windows XP and have uninstalled Antivirus and have XP
>>firewall off. Help !!
>>.
>>same prob
>.
>

Make sure Cryptographic Services in Control Panel/Administrative
Tools/Services is started and running. While there, check to see if
Wireless Zero Configuration is started and running also. If it is, you
don't need the software front end to install, just go into Network
Connections and create the connection.
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

<(E-Mail Removed)> wrote in message
news:14aec01c3f999$9f7e8f90$(E-Mail Removed)...
> I see Loading Configuration Wizard, then nothing.
>
> I tried copying all the files to the laptop and running
> setup from there but same result. It just stops and never
> completes the install.
>
>
> >-----Original Message-----
> >
> >>-----Original Message-----
> >>Trying to setup MN-700 Base Station. Run setup CD but
> >>after it installs software and says click "Next" to set
> >>up the hardware, that never happens. The wizard closes
> >>and therefore I can't setup the base station. Running
> >>Windows XP and have uninstalled Antivirus and have XP
> >>firewall off. Help !!
> >>.
> >>same prob
> >.
> >

>-----Original Message-----
>Make sure Cryptographic Services in Control
Panel/Administrative
>Tools/Services is started and running. While there,
check to see if
>Wireless Zero Configuration is started and running also.
If it is, you
>don't need the software front end to install, just go
into Network
>Connections and create the connection.
>--
>Chris H.
>Microsoft Windows MVP
>Associate Expert
>Expert Zone - www.microsoft.com/windowsxp/expertzone
>
><(E-Mail Removed)> wrote in message
>news:14aec01c3f999$9f7e8f90$(E-Mail Removed)...
>> I see Loading Configuration Wizard, then nothing.
>>
>> I tried copying all the files to the laptop and running
>> setup from there but same result. It just stops and
never
>> completes the install.
>>
>>
>> >-----Original Message-----
>> >
>> >>-----Original Message-----
>> >>Trying to setup MN-700 Base Station. Run setup CD but
>> >>after it installs software and says click "Next" to
set
>> >>up the hardware, that never happens. The wizard closes
>> >>and therefore I can't setup the base station. Running
>> >>Windows XP and have uninstalled Antivirus and have XP
>> >>firewall off. Help !!
>> >>.
>> >>same prob
>> >.
>> >
>
>
>.
>

Please stay in the original thread. This isn't a forum. Since you're not
on Windows XP, then you need to make sure all your programs a shut down.
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

<(E-Mail Removed)> wrote in message
news:1426f01c3f99c$c043a960$(E-Mail Removed)...
>
> >-----Original Message-----
> >Make sure Cryptographic Services in Control
> Panel/Administrative
> >Tools/Services is started and running. While there,
> check to see if
> >Wireless Zero Configuration is started and running also.
> If it is, you
> >don't need the software front end to install, just go
> into Network
> >Connections and create the connection.
> >--
> >Chris H.
> >Microsoft Windows MVP
> >Associate Expert
> >Expert Zone - www.microsoft.com/windowsxp/expertzone
> >
> ><(E-Mail Removed)> wrote in message
> >news:14aec01c3f999$9f7e8f90$(E-Mail Removed)...
> >> I see Loading Configuration Wizard, then nothing.
> >>
> >> I tried copying all the files to the laptop and running
> >> setup from there but same result. It just stops and
> never
> >> completes the install.
> >>
> >>
> >> >-----Original Message-----
> >> >
> >> >>-----Original Message-----
> >> >>Trying to setup MN-700 Base Station. Run setup CD but
> >> >>after it installs software and says click "Next" to
> set
> >> >>up the hardware, that never happens. The wizard closes
> >> >>and therefore I can't setup the base station. Running
> >> >>Windows XP and have uninstalled Antivirus and have XP
> >> >>firewall off. Help !!
> >> >>.
> >> >>same prob
> >> >.
> >> >
> >
> >
> >.
> >

All programs were closed.

>-----Original Message-----
>Please stay in the original thread. This isn't a forum.
Since you're not
>on Windows XP, then you need to make sure all your
programs a shut down.
>--
>Chris H.
>Microsoft Windows MVP
>Associate Expert
>Expert Zone - www.microsoft.com/windowsxp/expertzone
>
><(E-Mail Removed)> wrote in message
>news:1426f01c3f99c$c043a960$(E-Mail Removed)...
>>
>> >-----Original Message-----
>> >Make sure Cryptographic Services in Control
>> Panel/Administrative
>> >Tools/Services is started and running. While there,
>> check to see if
>> >Wireless Zero Configuration is started and running
also.
>> If it is, you
>> >don't need the software front end to install, just go
>> into Network
>> >Connections and create the connection.
>> >--
>> >Chris H.
>> >Microsoft Windows MVP
>> >Associate Expert
>> >Expert Zone - www.microsoft.com/windowsxp/expertzone
>> >
>> ><(E-Mail Removed)> wrote in message
>> >news:14aec01c3f999$9f7e8f90$(E-Mail Removed)...
>> >> I see Loading Configuration Wizard, then nothing.
>> >>
>> >> I tried copying all the files to the laptop and
running
>> >> setup from there but same result. It just stops and
>> never
>> >> completes the install.
>> >>
>> >>
>> >> >-----Original Message-----
>> >> >
>> >> >>-----Original Message-----
>> >> >>Trying to setup MN-700 Base Station. Run setup CD
but
>> >> >>after it installs software and says click "Next" to
>> set
>> >> >>up the hardware, that never happens. The wizard
closes
>> >> >>and therefore I can't setup the base station.
Running
>> >> >>Windows XP and have uninstalled Antivirus and have
XP
>> >> >>firewall off. Help !!
>> >> >>.
>> >> >>same prob
>> >> >.
>> >> >
>> >
>> >
>> >.
>> >
>
>
>.
>