Manual MN-700 base station setup problems

Hello,

I have a MN-700 base station and cannot configure it
manually. I am able to set it up through the broadband
network utility but cannot set it up manually. If I try to
go to http://192.168.2.1 as the manual suggests without
first setting up the base station using the broadband
network utility internet explorer tells me that it cannot
find the site. If however I first set the base station up
using the network utility I am able to access the router
and login to it through http://192.168.2.1 . The real
reason that I am trying to do this is to share an MSN
dialup account. If I set the router up with the broadband
network utility it will not allow me to share my internet
although every other part of the network works properly.
Does any one else have a similar problem or know how to
fix this one? I am running windows XP on both computers
and have disabled all virus protection and firewalls while
I have been trying this.

Thank you very much,

Grif


Grif

Grif, what you're doing is "unsupported" by the hardware, which is designed
for cable and DSL connections. However, you might take a look at this
Knowledge Base article on satellite connections which uses ICS in Windows XP
to share the connection:
http://support.microsoft.com/default...&Product=MSbbn

You've basically got the same thing, just with a different incoming feed.
This KB article will assist you setting up the base station for access mode:
http://support.microsoft.com/default...&Product=MSbbn
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"Grif" <(E-Mail Removed)> wrote in message
news:43ba01c3e450$49dcce70$(E-Mail Removed)...
> Hello,
>
> I have a MN-700 base station and cannot configure it
> manually. I am able to set it up through the broadband
> network utility but cannot set it up manually. If I try to
> go to http://192.168.2.1 as the manual suggests without
> first setting up the base station using the broadband
> network utility internet explorer tells me that it cannot
> find the site. If however I first set the base station up
> using the network utility I am able to access the router
> and login to it through http://192.168.2.1 . The real
> reason that I am trying to do this is to share an MSN
> dialup account. If I set the router up with the broadband
> network utility it will not allow me to share my internet
> although every other part of the network works properly.
> Does any one else have a similar problem or know how to
> fix this one? I am running windows XP on both computers
> and have disabled all virus protection and firewalls while
> I have been trying this.
>
> Thank you very much,
>
> Grif