MN-700 Base Station Mangement Tool

I recently did the autoupdate of the Base Station's
Firmware. After doing the firmware update I can no
longer access the base station manangement tool. It
gives me a Gateway timeout error. Any help would be
great. Thanks.


Paul

Can you access it through your browser by going to 192.168.2.1 (the default)
or whatever IP you assigned it? Do you happen to be running any third-party
firewall on your system?
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"Paul" <(E-Mail Removed)> wrote in message
news:3bec01c3e2cd$00fd01e0$(E-Mail Removed)...
>
> I recently did the autoupdate of the Base Station's
> Firmware. After doing the firmware update I can no
> longer access the base station manangement tool. It
> gives me a Gateway timeout error. Any help would be
> great. Thanks.

No, I can't access it through my browser either. I do
not have any third party firewalls running, and the
windows firewall is not on as well.


>-----Original Message-----
>Can you access it through your browser by going to
192.168.2.1 (the default)
>or whatever IP you assigned it? Do you happen to be
running any third-party
>firewall on your system?
>--
>Chris H.
>Microsoft Windows MVP
>Associate Expert
>Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>"Paul" <(E-Mail Removed)> wrote in
message
>news:3bec01c3e2cd$00fd01e0$(E-Mail Removed)...
>>
>> I recently did the autoupdate of the Base Station's
>> Firmware. After doing the firmware update I can no
>> longer access the base station manangement tool. It
>> gives me a Gateway timeout error. Any help would be
>> great. Thanks.
>
>
>.
>

Okay, after the firmware update, did you reboot your router? Might try
unplugging the power for a minute or so and then plug it back in. Also,
have you done any "tweaks" in Control Panel/Administrative Tools/Services?
BTW, do you happen to be running an ATI graphics card?
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"Paul" <(E-Mail Removed)> wrote in message
news:3c5401c3e2db$76c25bb0$(E-Mail Removed)...
> No, I can't access it through my browser either. I do
> not have any third party firewalls running, and the
> windows firewall is not on as well.
>
>
> >-----Original Message-----
> >Can you access it through your browser by going to
> 192.168.2.1 (the default)
> >or whatever IP you assigned it? Do you happen to be
> running any third-party
> >firewall on your system?
> >--
> >Chris H.
> >Microsoft Windows MVP
> >Associate Expert
> >Expert Zone - www.microsoft.com/windowsxp/expertzone
> >
> >"Paul" <(E-Mail Removed)> wrote in
> message
> >news:3bec01c3e2cd$00fd01e0$(E-Mail Removed)...
> >>
> >> I recently did the autoupdate of the Base Station's
> >> Firmware. After doing the firmware update I can no
> >> longer access the base station manangement tool. It
> >> gives me a Gateway timeout error. Any help would be
> >> great. Thanks.
> >
> >
> >.
> >

Hi,

Have you tried doing a reset on the MN-700?

--
Gary Tsang
Microsoft MVP - Windows XP Shell/User
http://www.microsoft.com/mvp


"Paul" <(E-Mail Removed)> wrote in message
news:3c5401c3e2db$76c25bb0$(E-Mail Removed)...
> No, I can't access it through my browser either. I do
> not have any third party firewalls running, and the
> windows firewall is not on as well.
>
>
> >-----Original Message-----
> >Can you access it through your browser by going to
> 192.168.2.1 (the default)
> >or whatever IP you assigned it? Do you happen to be
> running any third-party
> >firewall on your system?
> >--
> >Chris H.
> >Microsoft Windows MVP
> >Associate Expert
> >Expert Zone - www.microsoft.com/windowsxp/expertzone
> >
> >"Paul" <(E-Mail Removed)> wrote in
> message
> >news:3bec01c3e2cd$00fd01e0$(E-Mail Removed)...
> >>
> >> I recently did the autoupdate of the Base Station's
> >> Firmware. After doing the firmware update I can no
> >> longer access the base station manangement tool. It
> >> gives me a Gateway timeout error. Any help would be
> >> great. Thanks.
> >
> >
> >.
> >

The router rebooted on its on after the update, I have
rebooted it since then. I have tried reinstalling the
software, and pushing the reset on the back of the
router. I have not done any tweaks. I just purchased
the router, Do you think it may be defective? I am not
using an ATI card, have a NVIDA Card. Thanks.

>-----Original Message-----
>Okay, after the firmware update, did you reboot your
router? Might try
>unplugging the power for a minute or so and then plug it
back in. Also,
>have you done any "tweaks" in Control
Panel/Administrative Tools/Services?
>BTW, do you happen to be running an ATI graphics card?
>--
>Chris H.
>Microsoft Windows MVP
>Associate Expert
>Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>"Paul" <(E-Mail Removed)> wrote in
message
>news:3c5401c3e2db$76c25bb0$(E-Mail Removed)...
>> No, I can't access it through my browser either. I do
>> not have any third party firewalls running, and the
>> windows firewall is not on as well.
>>
>>
>> >-----Original Message-----
>> >Can you access it through your browser by going to
>> 192.168.2.1 (the default)
>> >or whatever IP you assigned it? Do you happen to be
>> running any third-party
>> >firewall on your system?
>> >--
>> >Chris H.
>> >Microsoft Windows MVP
>> >Associate Expert
>> >Expert Zone - www.microsoft.com/windowsxp/expertzone
>> >
>> >"Paul" <(E-Mail Removed)> wrote in
>> message
>> >news:3bec01c3e2cd$00fd01e0$(E-Mail Removed)...
>> >>
>> >> I recently did the autoupdate of the Base Station's
>> >> Firmware. After doing the firmware update I can no
>> >> longer access the base station manangement tool. It
>> >> gives me a Gateway timeout error. Any help would be
>> >> great. Thanks.
>> >
>> >
>> >.
>> >
>
>
>.
>

I have tried a reset buy pushing the button on the back
of the router. I still cannot get access to it. I have
also tried to reinstalled the software. Thanks


>-----Original Message-----
>Hi,
>
>Have you tried doing a reset on the MN-700?
>
>--
>Gary Tsang
>Microsoft MVP - Windows XP Shell/User
>http://www.microsoft.com/mvp
>
>
>"Paul" <(E-Mail Removed)> wrote in
message
>news:3c5401c3e2db$76c25bb0$(E-Mail Removed)...
>> No, I can't access it through my browser either. I do
>> not have any third party firewalls running, and the
>> windows firewall is not on as well.
>>
>>
>> >-----Original Message-----
>> >Can you access it through your browser by going to
>> 192.168.2.1 (the default)
>> >or whatever IP you assigned it? Do you happen to be
>> running any third-party
>> >firewall on your system?
>> >--
>> >Chris H.
>> >Microsoft Windows MVP
>> >Associate Expert
>> >Expert Zone - www.microsoft.com/windowsxp/expertzone
>> >
>> >"Paul" <(E-Mail Removed)> wrote in
>> message
>> >news:3bec01c3e2cd$00fd01e0$(E-Mail Removed)...
>> >>
>> >> I recently did the autoupdate of the Base Station's
>> >> Firmware. After doing the firmware update I can no
>> >> longer access the base station manangement tool. It
>> >> gives me a Gateway timeout error. Any help would be
>> >> great. Thanks.
>> >
>> >
>> >.
>> >
>
>
>.
>

Have you tweaked anything in Control Panel/Administrative Tools/Services?
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"Paul" <(E-Mail Removed)> wrote in message
news:3c7101c3e2e1$0f863b00$(E-Mail Removed)...
> The router rebooted on its on after the update, I have
> rebooted it since then. I have tried reinstalling the
> software, and pushing the reset on the back of the
> router. I have not done any tweaks. I just purchased
> the router, Do you think it may be defective? I am not
> using an ATI card, have a NVIDA Card. Thanks.
>
> >-----Original Message-----
> >Okay, after the firmware update, did you reboot your
> router? Might try
> >unplugging the power for a minute or so and then plug it
> back in. Also,
> >have you done any "tweaks" in Control
> Panel/Administrative Tools/Services?
> >BTW, do you happen to be running an ATI graphics card?
> >--
> >Chris H.
> >Microsoft Windows MVP
> >Associate Expert
> >Expert Zone - www.microsoft.com/windowsxp/expertzone
> >
> >"Paul" <(E-Mail Removed)> wrote in
> message
> >news:3c5401c3e2db$76c25bb0$(E-Mail Removed)...
> >> No, I can't access it through my browser either. I do
> >> not have any third party firewalls running, and the
> >> windows firewall is not on as well.
> >>
> >>
> >> >-----Original Message-----
> >> >Can you access it through your browser by going to
> >> 192.168.2.1 (the default)
> >> >or whatever IP you assigned it? Do you happen to be
> >> running any third-party
> >> >firewall on your system?
> >> >--
> >> >Chris H.
> >> >Microsoft Windows MVP
> >> >Associate Expert
> >> >Expert Zone - www.microsoft.com/windowsxp/expertzone
> >> >
> >> >"Paul" <(E-Mail Removed)> wrote in
> >> message
> >> >news:3bec01c3e2cd$00fd01e0$(E-Mail Removed)...
> >> >>
> >> >> I recently did the autoupdate of the Base Station's
> >> >> Firmware. After doing the firmware update I can no
> >> >> longer access the base station manangement tool. It
> >> >> gives me a Gateway timeout error. Any help would be
> >> >> great. Thanks.
> >> >
> >> >
> >> >.
> >> >
> >
> >
> >.
> >

No I don't believe I have tweaked anything.

>-----Original Message-----
>Have you tweaked anything in Control
Panel/Administrative Tools/Services?
>--
>Chris H.
>Microsoft Windows MVP
>Associate Expert
>Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>"Paul" <(E-Mail Removed)> wrote in
message
>news:3c7101c3e2e1$0f863b00$(E-Mail Removed)...
>> The router rebooted on its on after the update, I have
>> rebooted it since then. I have tried reinstalling the
>> software, and pushing the reset on the back of the
>> router. I have not done any tweaks. I just purchased
>> the router, Do you think it may be defective? I am not
>> using an ATI card, have a NVIDA Card. Thanks.
>>
>> >-----Original Message-----
>> >Okay, after the firmware update, did you reboot your
>> router? Might try
>> >unplugging the power for a minute or so and then plug
it
>> back in. Also,
>> >have you done any "tweaks" in Control
>> Panel/Administrative Tools/Services?
>> >BTW, do you happen to be running an ATI graphics card?
>> >--
>> >Chris H.
>> >Microsoft Windows MVP
>> >Associate Expert
>> >Expert Zone - www.microsoft.com/windowsxp/expertzone
>> >
>> >"Paul" <(E-Mail Removed)> wrote in
>> message
>> >news:3c5401c3e2db$76c25bb0$(E-Mail Removed)...
>> >> No, I can't access it through my browser either. I
do
>> >> not have any third party firewalls running, and the
>> >> windows firewall is not on as well.
>> >>
>> >>
>> >> >-----Original Message-----
>> >> >Can you access it through your browser by going to
>> >> 192.168.2.1 (the default)
>> >> >or whatever IP you assigned it? Do you happen to
be
>> >> running any third-party
>> >> >firewall on your system?
>> >> >--
>> >> >Chris H.
>> >> >Microsoft Windows MVP
>> >> >Associate Expert
>> >> >Expert Zone -
www.microsoft.com/windowsxp/expertzone
>> >> >
>> >> >"Paul" <(E-Mail Removed)> wrote
in
>> >> message
>> >> >news:3bec01c3e2cd$00fd01e0$(E-Mail Removed)...
>> >> >>
>> >> >> I recently did the autoupdate of the Base
Station's
>> >> >> Firmware. After doing the firmware update I can
no
>> >> >> longer access the base station manangement
tool. It
>> >> >> gives me a Gateway timeout error. Any help
would be
>> >> >> great. Thanks.
>> >> >
>> >> >
>> >> >.
>> >> >
>> >
>> >
>> >.
>> >
>
>
>.
>

Should I take the router back to the store, and then not
upgrade the firmware on the new one?

>-----Original Message-----
>No I don't believe I have tweaked anything.
>
>>-----Original Message-----
>>Have you tweaked anything in Control
>Panel/Administrative Tools/Services?
>>--
>>Chris H.
>>Microsoft Windows MVP
>>Associate Expert
>>Expert Zone - www.microsoft.com/windowsxp/expertzone
>>
>>"Paul" <(E-Mail Removed)> wrote in
>message
>>news:3c7101c3e2e1$0f863b00$(E-Mail Removed)...
>>> The router rebooted on its on after the update, I have
>>> rebooted it since then. I have tried reinstalling the
>>> software, and pushing the reset on the back of the
>>> router. I have not done any tweaks. I just purchased
>>> the router, Do you think it may be defective? I am
not
>>> using an ATI card, have a NVIDA Card. Thanks.
>>>
>>> >-----Original Message-----
>>> >Okay, after the firmware update, did you reboot your
>>> router? Might try
>>> >unplugging the power for a minute or so and then
plug
>it
>>> back in. Also,
>>> >have you done any "tweaks" in Control
>>> Panel/Administrative Tools/Services?
>>> >BTW, do you happen to be running an ATI graphics
card?
>>> >--
>>> >Chris H.
>>> >Microsoft Windows MVP
>>> >Associate Expert
>>> >Expert Zone - www.microsoft.com/windowsxp/expertzone
>>> >
>>> >"Paul" <(E-Mail Removed)> wrote in
>>> message
>>> >news:3c5401c3e2db$76c25bb0$(E-Mail Removed)...
>>> >> No, I can't access it through my browser either.
I
>do
>>> >> not have any third party firewalls running, and the
>>> >> windows firewall is not on as well.
>>> >>
>>> >>
>>> >> >-----Original Message-----
>>> >> >Can you access it through your browser by going to
>>> >> 192.168.2.1 (the default)
>>> >> >or whatever IP you assigned it? Do you happen to
>be
>>> >> running any third-party
>>> >> >firewall on your system?
>>> >> >--
>>> >> >Chris H.
>>> >> >Microsoft Windows MVP
>>> >> >Associate Expert
>>> >> >Expert Zone -
>www.microsoft.com/windowsxp/expertzone
>>> >> >
>>> >> >"Paul" <(E-Mail Removed)>
wrote
>in
>>> >> message
>>> >> >news:3bec01c3e2cd$00fd01e0$(E-Mail Removed)...
>>> >> >>
>>> >> >> I recently did the autoupdate of the Base
>Station's
>>> >> >> Firmware. After doing the firmware update I
can
>no
>>> >> >> longer access the base station manangement
>tool. It
>>> >> >> gives me a Gateway timeout error. Any help
>would be
>>> >> >> great. Thanks.
>>> >> >
>>> >> >
>>> >> >.
>>> >> >
>>> >
>>> >
>>> >.
>>> >
>>
>>
>>.
>>
>.
>