MN-700 and UP&P Problem

Universal Plug and Play was installed in Add/Remove programs under add
Windows Components. I bought a MN-700 to replace my MN-100. I had no
problems with my MN-100 and My Network Places access. I swapped out my
NM-100 and installed the MN-700 with no problems and updated to the new
firmware. I was only able to access My Network Places only one time after
that it would hang if I tried to access it and had to reboot to open it but
it would only open once. This was also happening on my wife's computer. I
uninstalled UP&P on both system's and it solved the My Network Places access
problem. I can't figure out why it was not happening with the MN-100. Has
anyone else had this problem.

--
(-: Gary Hegan :-)

It's currently a known issue...

Hoping to see it fixed soon!

--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"Gary" <(E-Mail Removed)> wrote in message
news:%23d5$(E-Mail Removed)...
> Universal Plug and Play was installed in Add/Remove programs under add
> Windows Components. I bought a MN-700 to replace my MN-100. I had no
> problems with my MN-100 and My Network Places access. I swapped out my
> NM-100 and installed the MN-700 with no problems and updated to the new
> firmware. I was only able to access My Network Places only one time after
> that it would hang if I tried to access it and had to reboot to open it
but
> it would only open once. This was also happening on my wife's computer. I
> uninstalled UP&P on both system's and it solved the My Network Places
access
> problem. I can't figure out why it was not happening with the MN-100. Has
> anyone else had this problem.
>
> --
> (-: Gary Hegan :-)
>
>
>
>

Do you need the software installed to install the firmware upgrades. I know
you need to check for updates. I would like to uninstall it and use the web
browser to configure the Base Station settings.


"Jason Tsang" <jason-(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> It's currently a known issue...
>
> Hoping to see it fixed soon!
>
> --
> Jason Tsang - Microsoft MVP
>
> Find out about the MS MVP Program -
> http://mvp.support.microsoft.com/default.aspx
>
> "Gary" <(E-Mail Removed)> wrote in message
> news:%23d5$(E-Mail Removed)...
> > Universal Plug and Play was installed in Add/Remove programs under add
> > Windows Components. I bought a MN-700 to replace my MN-100. I had no
> > problems with my MN-100 and My Network Places access. I swapped out my
> > NM-100 and installed the MN-700 with no problems and updated to the new
> > firmware. I was only able to access My Network Places only one time
after
> > that it would hang if I tried to access it and had to reboot to open it
> but
> > it would only open once. This was also happening on my wife's computer.
I
> > uninstalled UP&P on both system's and it solved the My Network Places
> access
> > problem. I can't figure out why it was not happening with the MN-100.
Has
> > anyone else had this problem.
> >
> > --
> > (-: Gary Hegan :-)
> >
> >
> >
> >
>
>

No

You can download the msbndownload.exe file and update the firmware that way.

--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"Gary" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Do you need the software installed to install the firmware upgrades. I
know
> you need to check for updates. I would like to uninstall it and use the
web
> browser to configure the Base Station settings.
>
>
> "Jason Tsang" <jason-(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > It's currently a known issue...
> >
> > Hoping to see it fixed soon!
> >
> > --
> > Jason Tsang - Microsoft MVP
> >
> > Find out about the MS MVP Program -
> > http://mvp.support.microsoft.com/default.aspx
> >
> > "Gary" <(E-Mail Removed)> wrote in message
> > news:%23d5$(E-Mail Removed)...
> > > Universal Plug and Play was installed in Add/Remove programs under add
> > > Windows Components. I bought a MN-700 to replace my MN-100. I had no
> > > problems with my MN-100 and My Network Places access. I swapped out my
> > > NM-100 and installed the MN-700 with no problems and updated to the
new
> > > firmware. I was only able to access My Network Places only one time
> after
> > > that it would hang if I tried to access it and had to reboot to open
it
> > but
> > > it would only open once. This was also happening on my wife's
computer.
> I
> > > uninstalled UP&P on both system's and it solved the My Network Places
> > access
> > > problem. I can't figure out why it was not happening with the MN-100.
> Has
> > > anyone else had this problem.
> > >
> > > --
> > > (-: Gary Hegan :-)
> > >
> > >
> > >
> > >
> >
> >
>
>

Thanks Jason


"Jason Tsang" <jason-(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> No
>
> You can download the msbndownload.exe file and update the firmware that
way.
>
> --
> Jason Tsang - Microsoft MVP
>
> Find out about the MS MVP Program -
> http://mvp.support.microsoft.com/default.aspx
>
> "Gary" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > Do you need the software installed to install the firmware upgrades. I
> know
> > you need to check for updates. I would like to uninstall it and use the
> web
> > browser to configure the Base Station settings.
> >
> >
> > "Jason Tsang" <jason-(E-Mail Removed)> wrote in message
> > news:(E-Mail Removed)...
> > > It's currently a known issue...
> > >
> > > Hoping to see it fixed soon!
> > >
> > > --
> > > Jason Tsang - Microsoft MVP
> > >
> > > Find out about the MS MVP Program -
> > > http://mvp.support.microsoft.com/default.aspx
> > >
> > > "Gary" <(E-Mail Removed)> wrote in message
> > > news:%23d5$(E-Mail Removed)...
> > > > Universal Plug and Play was installed in Add/Remove programs under
add
> > > > Windows Components. I bought a MN-700 to replace my MN-100. I had no
> > > > problems with my MN-100 and My Network Places access. I swapped out
my
> > > > NM-100 and installed the MN-700 with no problems and updated to the
> new
> > > > firmware. I was only able to access My Network Places only one time
> > after
> > > > that it would hang if I tried to access it and had to reboot to open
> it
> > > but
> > > > it would only open once. This was also happening on my wife's
> computer.
> > I
> > > > uninstalled UP&P on both system's and it solved the My Network
Places
> > > access
> > > > problem. I can't figure out why it was not happening with the
MN-100.
> > Has
> > > > anyone else had this problem.
> > > >
> > > > --
> > > > (-: Gary Hegan :-)
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>