problem installing 530 ethernet win98

Trying to setup the router on windows 98. Router is already connected to XP via
usb.

I have installed network card on the pc, have enabled client for microsoft
newtorks and tcp/ip is installed to the network card.

When I installed the usb on the laptop I had to run setup.exe from the
speedtouch cd contents and then setup the router. But that is for usb only and
there seems to be no other setup program for ethernet connection. So I go
direct to router setup and it goes through the setup with "remark: initialising
tcp/ip" it gets to the end and fails.

XP made it so easy, but now on win98 (first edition) I am stuck and not sure how
to proceed. There is nothing in the manual about setting up the ethernet, only
the usb. I imagine this is because the ethernet is for xbox gaming and its
simply supposed to be plug and go.

One thing I did notice, is that when installing the network card it requested
the windows cd to install dhcp file but the cd failed to find it. Could this be
the problem? Can I set it to a particular ip address rather than using dhcp?




Beck

"Beck" <(E-Mail Removed)> wrote in message
news:chulih$9ep$(E-Mail Removed)...
> Trying to setup the router on windows 98. Router is already connected to XP
via
> usb.
>
> I have installed network card on the pc, have enabled client for microsoft
> newtorks and tcp/ip is installed to the network card.
>
> When I installed the usb on the laptop I had to run setup.exe from the
> speedtouch cd contents and then setup the router. But that is for usb only
and
> there seems to be no other setup program for ethernet connection. So I go
> direct to router setup and it goes through the setup with "remark:
initialising
> tcp/ip" it gets to the end and fails.
>
> XP made it so easy, but now on win98 (first edition) I am stuck and not sure
how
> to proceed. There is nothing in the manual about setting up the ethernet,
only
> the usb. I imagine this is because the ethernet is for xbox gaming and its
> simply supposed to be plug and go.
>
> One thing I did notice, is that when installing the network card it requested
> the windows cd to install dhcp file but the cd failed to find it. Could this
be
> the problem? Can I set it to a particular ip address rather than using dhcp?

dhcp server file is not the only file missing. I tried to skip the file and
loads of files were not available on the windows 98 setup cd.
Dammit.

"Beck" <(E-Mail Removed)> wrote in message
news:chulih$9ep$(E-Mail Removed)...
> Trying to setup the router on windows 98. Router is already connected to
> XP via
> usb.
>
> I have installed network card on the pc, have enabled client for microsoft
> newtorks and tcp/ip is installed to the network card.
>
> When I installed the usb on the laptop I had to run setup.exe from the
> speedtouch cd contents and then setup the router. But that is for usb
> only and
> there seems to be no other setup program for ethernet connection. So I go
> direct to router setup and it goes through the setup with "remark:
> initialising
> tcp/ip" it gets to the end and fails.
>
> XP made it so easy, but now on win98 (first edition) I am stuck and not
> sure how
> to proceed. There is nothing in the manual about setting up the ethernet,
> only
> the usb. I imagine this is because the ethernet is for xbox gaming and its
> simply supposed to be plug and go.
>
> One thing I did notice, is that when installing the network card it
> requested
> the windows cd to install dhcp file but the cd failed to find it. Could
> this be
> the problem? Can I set it to a particular ip address rather than using
> dhcp?
>
>

You can set a static ip if you like, from a quick read of the manual the
following
settings should work.

IP: 10.0.0.x (x can be a number from 1 to 254
but not 138)
Subnet mask: 255.0.0.0
Gateway: 10.0.0.138
DNS: 10.0.0.138
(I normally set 194.72.9.34 as a 2nd dns server)

These settings are similiar to what i use at home, got a speedtouch pro
there.

Hope that helps

Andrew

"Andrew" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>

> You can set a static ip if you like, from a quick read of the manual the
> following
> settings should work.
>
> IP: 10.0.0.x (x can be a number from 1 to 254
> but not 138)
> Subnet mask: 255.0.0.0
> Gateway: 10.0.0.138
> DNS: 10.0.0.138
> (I normally set 194.72.9.34 as a 2nd dns server)
>
> These settings are similiar to what i use at home, got a speedtouch pro
> there.

Thanks but its not working. When I try and install the ethernet card it
requests the windows 98 cd but loads of files it wants are not on the cd so it
fails to install properly. With all these files missing I do not see how I can
setup the connection.