Synoptics Lattishub 2814

Anybody use this hub before.....??

I want to configure it but either Hyperterm(Windows) or minicom(linux) can
connect to it...

-harald

look on the www.nortelnetworks.com site - should be docs under obsolete
products.

AFAIK it needs 9600 8,n,1, but you need some handshake lines, and you "wake
up" the interface with CTRL-Y or something.

--
Regards

Stephen Hope - remove xx from email to reply
"Harald Hellesø" <(E-Mail Removed)> wrote in message
news:1a93b.61427$(E-Mail Removed) k...
> Anybody use this hub before.....??
>
> I want to configure it but either Hyperterm(Windows) or minicom(linux) can
> connect to it...
>
> -harald
>
>

What kinda Handshake lines?

I'm using Hyperterm.....

-harald
"shope" <(E-Mail Removed)> wrote in message
news:Tl93b.4967$(E-Mail Removed)...
> look on the www.nortelnetworks.com site - should be docs under obsolete
> products.
>
> AFAIK it needs 9600 8,n,1, but you need some handshake lines, and you
"wake
> up" the interface with CTRL-Y or something.
>
> --
> Regards
>
> Stephen Hope - remove xx from email to reply
> "Harald Hellesø" <(E-Mail Removed)> wrote in message
> news:1a93b.61427$(E-Mail Removed) k...
> > Anybody use this hub before.....??
> >
> > I want to configure it but either Hyperterm(Windows) or minicom(linux)
can
> > connect to it...
> >
> > -harald
> >
> >
>
>

There is nothing there that can acctually tell me how to configure it...Or
how to use the service port

So if anybody is seeing something there that i can't plz let me know


harald
"shope" <(E-Mail Removed)> wrote in message
news:42s3b.544$(E-Mail Removed)...
> its in the manuals
>
> go to nortel networks.
>
> choose technical docs
>
> choose discontinued products
>
> choose system 2000 ethernet
>
> 16 pages of doc links - i suggest you start with an installation manual.
>
> --
> Regards
>
> Stephen Hope - remove xx from email to reply
> "Harald Hellesø" <(E-Mail Removed)> wrote in message
> news:n9a3b.61447$(E-Mail Removed) k...
> > What kinda Handshake lines?
> >
> > I'm using Hyperterm.....
> >
> > -harald
> > "shope" <(E-Mail Removed)> wrote in message
> > news:Tl93b.4967$(E-Mail Removed)...
> > > look on the www.nortelnetworks.com site - should be docs under
obsolete
> > > products.
> > >
> > > AFAIK it needs 9600 8,n,1, but you need some handshake lines, and you
> > "wake
> > > up" the interface with CTRL-Y or something.
> > >
> > > --
> > > Regards
> > >
> > > Stephen Hope - remove xx from email to reply
> > > "Harald Hellesø" <(E-Mail Removed)> wrote in message
> > > news:1a93b.61427$(E-Mail Removed) k...
> > > > Anybody use this hub before.....??
> > > >
> > > > I want to configure it but either Hyperterm(Windows) or
minicom(linux)
> > can
> > > > connect to it...
> > > >
> > > > -harald
> > > >
> > > >
> > >
> > >
> >
> >
>
>