stuck on wpa_supplicant

I am trying to use wpa_supplicant
on my Xandros 3.0 laptop the card I have is a smc2536w 11gz
how do I find out what driver its using so I can put it in
wpa_suplicant.conf

adm8211driver I think

lsmod
cdrom 38300 2 sr_mod,ide_cd
adm8211 52736 0
crc32 4480 1 adm8211
af_packet 22280 4
sd_mod 14608 0
scsi_mod 79424 4 usb_storage,sg,sr_mod,sd_mod
e100 34688 0
mii 4992 1 e100
yenta_socket 20480 1


lspci
zork:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and

Memory Controller Hub (rev 11)
0000:00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset
Graphics Controller] (rev 11)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 03)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BAM ISA Bridge (LPC) (rev 03)

0000:00:1f.1 IDE interface: Intel Corp. 82801BAM IDE U100 (rev 03)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev
03)
0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 03)
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev
03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97

Audio (rev 03)
0000:01:03.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller
(rev 01)
0000:01:03.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller
(rev 01)
0000:01:0b.0 PCI bridge: Actiontec Electronics Inc Mini-PCI bridge (rev

11)
0000:02:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro
100] (rev 08)
0000:02:08.0 Communication controller: Lucent Microelectronics WinModem

56k (rev 01)
0000:03:00.0 Network controller: Linksys ADMtek ADM8211 802.11b
Wireless Interface (rev 20)


so it has the correct driver adm8211


/lib/modules/2.6.9-x1/kernel/drivers/net/wirelesss has a adm8211.ko


I tried this from the command line:


wpa_supplicant -i eth1 -c /etc/wpa_supplicant.conf -Dadm8211


Unsupported driver 'adm8211'


this trys to use the prism driver not adm8211 any ideas?


wpa_supplicant -i eth1 -c /etc/wpa_supplicant.conf


ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
Trying to associate with 00:07:0e:b8:ef:25 (SSID='uofs' freq=0 MHz)

merrittr wrote:

> wpa_supplicant -i eth1 -c /etc/wpa_supplicant.conf -Dadm8211
> Unsupported driver 'adm8211'

Did you give the wpa_supplicant mailing list a shot?

http://hostap.epitest.fi/wpa_supplicant/
http://lists.shmoo.com/mailman/listinfo/hostap

Nope i didn't , but I will thanks for the info.



Spoon wrote:
> merrittr wrote:
>
> > wpa_supplicant -i eth1 -c /etc/wpa_supplicant.conf -Dadm8211
> > Unsupported driver 'adm8211'
>
> Did you give the wpa_supplicant mailing list a shot?
>
> http://hostap.epitest.fi/wpa_supplicant/
> http://lists.shmoo.com/mailman/listinfo/hostap