Static route configuration in RRAS, help?

I am using RRAS and NAT to route a satellite Internet connection. The
public interface the satellite is connected to automatically provides an
adaptor IP (10.40.xxx.xxx), and a default gateway (207.143.xxx.xxx) I can
get this information from the properties of the satellite software.

When I am setting up the Static Route in RRAS, I need to provide the
DESTINATION, NETWORK MASK and DEFAULT GATEWAY. Is my destination
10.20.xxx.xxx and my default gateway 207.143.xxx.xxx ? I tried 0.0.0.0 and
0.0.0.0 but this does not work.

Thanks

Static Route has to be configured on the public interface.
destination: 0.0.0.0
Network mask: 0.0.0.0
Default Gateway: 207.143.xx.xx

On the Private interface: there should be no Default Gateway (leave it
blank.)

On the clients machines, the Default Gateway must be
private IP of the server.

Sharad

"r042wal" <techguyinontario@no_junk_mail_yahoo.com> wrote in message
news:(E-Mail Removed)...
> I am using RRAS and NAT to route a satellite Internet connection. The
> public interface the satellite is connected to automatically provides an
> adaptor IP (10.40.xxx.xxx), and a default gateway (207.143.xxx.xxx) I can
> get this information from the properties of the satellite software.
>
> When I am setting up the Static Route in RRAS, I need to provide the
> DESTINATION, NETWORK MASK and DEFAULT GATEWAY. Is my destination
> 10.20.xxx.xxx and my default gateway 207.143.xxx.xxx ? I tried 0.0.0.0
and
> 0.0.0.0 but this does not work.
>
> Thanks
>
>