Static IP

My client has a SBS 2003 server. Everything seems to be working correctly
except the static IP. I have the IP set to 192.168.123.166. The IP address
does not change, but when i look at the IP settings, they are set for
dynamic. I connect a second NIC with the same results. The server is fully
patched and has the latest drives.

Ray <(E-Mail Removed)> wrote:
> My client has a SBS 2003 server. Everything seems to be working
> correctly except the static IP. I have the IP set to 192.168.123.166.
> The IP address does not change, but when i look at the IP settings,
> they are set for dynamic. I connect a second NIC with the same
> results. The server is fully patched and has the latest drives.

Hi - since you're using SBS, please post in
microsoft.public.windows.server.sbs for the most expert help. There's a
"change IP" wizard you should run in SBS (you need to do pretty much
everything via wizards).

I am not sure about the issue, but posting the result of ipconfig /all here
may help.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Ray" <(E-Mail Removed)> wrote in message
news:39E6BBBF-5CB7-4A7C-8625-(E-Mail Removed)...
> My client has a SBS 2003 server. Everything seems to be working correctly
> except the static IP. I have the IP set to 192.168.123.166. The IP address
> does not change, but when i look at the IP settings, they are set for
> dynamic. I connect a second NIC with the same results. The server is fully
> patched and has the latest drives.