Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > Sprint Internet antenna with 802.11b?

Reply
Thread Tools Display Modes

Sprint Internet antenna with 802.11b?

 
 
Scott Phelps
Guest
Posts: n/a

 
      09-09-2005, 06:22 PM
I have a sprint antenna that I am no longer using. It has a connection for
an RG6 (of which cable I have plenty of). I also have an ORiNOCO gold card
with the MC Card connector. Can I create a pigtail that will convert MC-Card
to RG6 so I could see if this antenna give any improvements at all?

Any input appreciated!


 
Reply With Quote
 
 
 
 
David Taylor
Guest
Posts: n/a

 
      09-09-2005, 09:14 PM
> with the MC Card connector. Can I create a pigtail that will convert MC-Card
> to RG6 so I could see if this antenna give any improvements at all?


You can get a pigtail that will go from MC to typically N-type. From
there you're on your own.

David.
 
Reply With Quote
 
Jeff Liebermann
Guest
Posts: n/a

 
      09-10-2005, 05:33 PM
On Fri, 09 Sep 2005 18:22:42 GMT, "Scott Phelps" <(E-Mail Removed)> wrote:

>I have a sprint antenna that I am no longer using. It has a connection for
>an RG6 (of which cable I have plenty of). I also have an ORiNOCO gold card
>with the MC Card connector. Can I create a pigtail that will convert MC-Card
>to RG6 so I could see if this antenna give any improvements at all?


It's probably not just an antenna. It's a complete up/down converter
radio. The other end of the RG-6/u goes to what amounts to a DOCSIS
1.0 cable modem. Inside the "antenna" is quite a bit of electronics
including a 2.4Ghz notch filter designed to remove any possible
interference to the 2.5Ghz MMDS signal. With this filter in place,
it's useless for 2.4GHz.

I can't tell from your description which style of antenna you have.
My guess is that it's a California Amplifier model:
http://www.calamp.com/pro_mmds_2240-100.html
which was used extensively in the SF Bay area.

One of these could probably be hacked into something useful, but not
without a pile of test equipment and some microwave experience.


--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
 
Reply With Quote
 
Scott Phelps
Guest
Posts: n/a

 
      09-12-2005, 03:29 PM

"Jeff Liebermann" <(E-Mail Removed)> wrote in message
news(E-Mail Removed)...
> On Fri, 09 Sep 2005 18:22:42 GMT, "Scott Phelps" <(E-Mail Removed)> wrote:
>
>>I have a sprint antenna that I am no longer using. It has a connection for
>>an RG6 (of which cable I have plenty of). I also have an ORiNOCO gold card
>>with the MC Card connector. Can I create a pigtail that will convert
>>MC-Card
>>to RG6 so I could see if this antenna give any improvements at all?

>
> It's probably not just an antenna. It's a complete up/down converter
> radio. The other end of the RG-6/u goes to what amounts to a DOCSIS
> 1.0 cable modem. Inside the "antenna" is quite a bit of electronics
> including a 2.4Ghz notch filter designed to remove any possible
> interference to the 2.5Ghz MMDS signal. With this filter in place,
> it's useless for 2.4GHz.
>
> I can't tell from your description which style of antenna you have.
> My guess is that it's a California Amplifier model:
> http://www.calamp.com/pro_mmds_2240-100.html
> which was used extensively in the SF Bay area.
>
> One of these could probably be hacked into something useful, but not
> without a pile of test equipment and some microwave experience.




Its not the same model but very simular. My model is the part no 520024-2
.... but probally not a whole lot of difference. Right?


 
Reply With Quote
 
Jeff Liebermann
Guest
Posts: n/a

 
      09-12-2005, 04:53 PM
On Mon, 12 Sep 2005 15:29:23 GMT, "Scott Phelps" <(E-Mail Removed)> wrote:

>> I can't tell from your description which style of antenna you have.
>> My guess is that it's a California Amplifier model:
>> http://www.calamp.com/pro_mmds_2240-100.html
>> which was used extensively in the SF Bay area.


>Its not the same model but very simular. My model is the part no 520024-2
>... but probally not a whole lot of difference. Right?


I couldn't find that model number on the California Amplfier web pile.
Using Google, it appears to be a model supplied to Sprint (Wavepath)
for consumer MMDS service. I found the patent on the device, which
has something on what's inside.
http://www.delphion.com/details?&pn=US06037903__
You might wanna lookup the FCCID on the FCC web pile for more internal
details. I don't think it is suitable for 2.4GHz without extensive
modifications and a pile of test equipment.



--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sprint DSL Don Harvey Wireless Internet 2 07-24-2007 01:25 AM
Sprint touts 4G wireless Knowing About Wireless Internet 4 10-13-2006 08:11 PM
Can't connect to my sprint dsl modem JoAnn Broadband Hardware 0 01-22-2005 06:18 PM
changing from sprint to roadrunner ken Broadband Hardware 1 09-21-2004 05:03 AM
Sprint Getting with the Program Bill Wireless Internet 0 07-23-2003 02:40 AM



1 2 3 4 5 6 7 8 9 10 11