Speedtouch 530 issue

Not sure if this is a problem, or if I have done something wrong setting it up
or if its normal.

Received this router from BTY yesterday so duly set it up. The usb lights up
fine. The power on the router light is fine. But the lan light (@ sign which
shows when connected to phoneline) is supposed to be flashing green/yellow when
the line is not activated. But there is no light on at all.
I have put the filter into the wall socket with the adsl in the adsl slot and
the phones in a triple socket on the phone slot. I was told this setup with the
filter would be fine.
The installation was flawless and no errors, usb installed fine and it was a
doddle.
So I am not sure what is up.
Unless the manual is wrong and when the exchange is not ready you really do get
no light at all.
So if anyone has any experience with this router, can you tell me if you had the
same thing with the light not coming on please?

thanks.

"Beck" <(E-Mail Removed)> wrote in message
news:chuc26$msd$(E-Mail Removed)...
> Not sure if this is a problem, or if I have done something wrong setting
> it up
> or if its normal.
>
> Received this router from BTY yesterday so duly set it up. The usb lights
> up
> fine. The power on the router light is fine. But the lan light (@ sign
> which
> shows when connected to phoneline) is supposed to be flashing green/yellow
> when
> the line is not activated. But there is no light on at all.
> I have put the filter into the wall socket with the adsl in the adsl slot
> and
> the phones in a triple socket on the phone slot. I was told this setup
> with the
> filter would be fine.
> The installation was flawless and no errors, usb installed fine and it was
> a
> doddle.
> So I am not sure what is up.
> Unless the manual is wrong and when the exchange is not ready you really
> do get
> no light at all.
> So if anyone has any experience with this router, can you tell me if you
> had the
> same thing with the light not coming on please?
>
> thanks.
>
>

The @ light is off when there's no DSL line present so if your line hasn't
been activated yet then this should be what you get.

Flashing amber indicates that DSL line is present and synchronisation is
pending.

This is followed by solid amber which indicates DSL synch is achieved but it
only flashes between green and amber when the connection is pending.

This is the last combination in the sequence prior to solid green when end
to end connection is achieved.

Hope this helps.


Stephen

"Stephen Stewart" <(E-Mail Removed)> wrote in message
news:chufj8$t53$(E-Mail Removed)...
> The @ light is off when there's no DSL line present so if your line hasn't
> been activated yet then this should be what you get.
>
> Flashing amber indicates that DSL line is present and synchronisation is
> pending.
>
> This is followed by solid amber which indicates DSL synch is achieved but it
> only flashes between green and amber when the connection is pending.
>
> This is the last combination in the sequence prior to solid green when end
> to end connection is achieved.

Thanks Stephen, the manual seemed to say to the contrary, I probably misread it.
At least I know what to expect now, ta.