Something better than the Linksys wap11

Hello,

I want to bridge two APs. I saw an article about the linksys wap11, but the
article was a bit old. what would be a (cheap) but modern device to use?

I bought two WAP11 version 1.1 off of eBay, then tweaked them using the
WAP11 hack. I bridge two buildings that are about 100 feet apart - direct
line of site - each sitting in a window.

http://www.seattlewireless.net/index.cgi/Wap11Hack

Works like a champ!!

"Mark" <(E-Mail Removed)> wrote in message
news:bpe68h$5p0$00$(E-Mail Removed)...
> Hello,
>
> I want to bridge two APs. I saw an article about the linksys wap11, but
the
> article was a bit old. what would be a (cheap) but modern device to use?
>
>

Linksys still makes the WAP11 - I think the current version is 2.6.

If you want a fatser link, you can go for the WAP54G, or something like it.
Here is a link to all the Linksys wireless products, including dedicated
access points. Scroll the entire page.

http://www.linksys.com/products/grou...rid=33&scid=35


"Jim Orfanakos" <jim@-nospam-orfanakos.com> wrote in message
news:(E-Mail Removed)...
> I bought two WAP11 version 1.1 off of eBay, then tweaked them using the
> WAP11 hack. I bridge two buildings that are about 100 feet apart - direct
> line of site - each sitting in a window.
>
> http://www.seattlewireless.net/index.cgi/Wap11Hack
>
> Works like a champ!!
>
> "Mark" <(E-Mail Removed)> wrote in message
> news:bpe68h$5p0$00$(E-Mail Removed)...
> > Hello,
> >
> > I want to bridge two APs. I saw an article about the linksys wap11, but
> the
> > article was a bit old. what would be a (cheap) but modern device to use?
> >
> >
>
>