Networking Forums

Networking Forums > Computer Networking > Windows Networking > SNMP server wont start and keeps giving error

Reply
Thread Tools Display Modes

SNMP server wont start and keeps giving error

 
 
Erik W
Guest
Posts: n/a

 
      05-15-2006, 09:31 AM
I keep getting the following error in the eventlog of a Windows 2003 Standard
Server when I try to start theSNMP service:

Faulting application snmp.exe, version 5.2.3790.1830, faulting module
kernel32.dll, version 5.2.3790.1830, fault address 0x00015dea.

I tried to remove and reinstall the service, nothing, I tried to reinstall
SP1 no changes, what is causing this problem?

the server is:
A Dell PowerEdge 1800
BIOS-versie A05
BIOS-datum 09-21-05
Windows-versie Microsoft(R) Windows(R) Server 2003, Standard Edition

Hardware:
Dvd/cd-rom-stations HL-DT-ST DVD-ROM GDR8164B
Disksstations DELL Array SCSI Disk Device 446.9GB
VideoCards RADEON 7000 Series 16MB
Diskettestations (Standard floppy disk drives) Floppy disk drive
IDE ATA/ATAPI-controllers Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE Channel
Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE Channel
Secondary IDE Channel
Keyboard USB Human Interface Device
Mouse USB Human Interface Device
Monitor Default Monitor - (Standard monitor types)
USB-controllers Intel(R) 82801EB USB Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller - 24D7
Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD
Adapters Intel(R) PRO/1000 MT Network Connection

Processor:
Intel(R) Xeon(TM) CPU 2.80GHz
Klokseed 2.8GHz
L2-cachesize 2048


--


Regards

Erik W
 
Reply With Quote
 
 
 
 
Louis Vitiello Jr.
Guest
Posts: n/a

 
      05-15-2006, 05:34 PM
Hey Erik,

Have you tried uninstalling it through Add/Remove Components then
re-installing it off the CD?

Hope this helps,
--
Louis Vitiello Jr.
------------------------------
MCSE, MCSA, MCP, A+/N+
ERCP XP Pro / Net Concepts


"Erik W" <(E-Mail Removed)> wrote in message
news:A38FD060-E2A8-4548-AFE4-(E-Mail Removed)...
>I keep getting the following error in the eventlog of a Windows 2003
>Standard
> Server when I try to start theSNMP service:
>
> Faulting application snmp.exe, version 5.2.3790.1830, faulting module
> kernel32.dll, version 5.2.3790.1830, fault address 0x00015dea.
>
> I tried to remove and reinstall the service, nothing, I tried to reinstall
> SP1 no changes, what is causing this problem?
>
> the server is:
> A Dell PowerEdge 1800
> BIOS-versie A05
> BIOS-datum 09-21-05
> Windows-versie Microsoft(R) Windows(R) Server 2003, Standard Edition
>
> Hardware:
> Dvd/cd-rom-stations HL-DT-ST DVD-ROM GDR8164B
> Disksstations DELL Array SCSI Disk Device 446.9GB
> VideoCards RADEON 7000 Series 16MB
> Diskettestations (Standard floppy disk drives) Floppy disk drive
> IDE ATA/ATAPI-controllers Intel(R) 82801EB Ultra ATA Storage Controllers
> Primary IDE Channel
> Intel(R) 82801EB Ultra ATA Storage Controllers
> Primary IDE Channel
> Secondary IDE Channel
> Keyboard USB Human Interface Device
> Mouse USB Human Interface Device
> Monitor Default Monitor - (Standard monitor types)
> USB-controllers Intel(R) 82801EB USB Universal Host Controller - 24D2
> Intel(R) 82801EB USB Universal Host Controller - 24D4
> Intel(R) 82801EB USB Universal Host Controller - 24D7
> Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD
> Adapters Intel(R) PRO/1000 MT Network Connection
>
> Processor:
> Intel(R) Xeon(TM) CPU 2.80GHz
> Klokseed 2.8GHz
> L2-cachesize 2048
>
>
> --
>
>
> Regards
>
> Erik W



 
Reply With Quote
 
Erik W
Guest
Posts: n/a

 
      05-16-2006, 06:39 AM
yes I did the uninstall and than reinstall it from CD, that was the first
thing I tried. But no luck.
--


Regards

Erik W


"Louis Vitiello Jr." wrote:

> Hey Erik,
>
> Have you tried uninstalling it through Add/Remove Components then
> re-installing it off the CD?
>
> Hope this helps,
> --
> Louis Vitiello Jr.
> ------------------------------
> MCSE, MCSA, MCP, A+/N+
> ERCP XP Pro / Net Concepts
>
>
> "Erik W" <(E-Mail Removed)> wrote in message
> news:A38FD060-E2A8-4548-AFE4-(E-Mail Removed)...
> >I keep getting the following error in the eventlog of a Windows 2003
> >Standard
> > Server when I try to start theSNMP service:
> >
> > Faulting application snmp.exe, version 5.2.3790.1830, faulting module
> > kernel32.dll, version 5.2.3790.1830, fault address 0x00015dea.
> >
> > I tried to remove and reinstall the service, nothing, I tried to reinstall
> > SP1 no changes, what is causing this problem?
> >
> > the server is:
> > A Dell PowerEdge 1800
> > BIOS-versie A05
> > BIOS-datum 09-21-05
> > Windows-versie Microsoft(R) Windows(R) Server 2003, Standard Edition
> >
> > Hardware:
> > Dvd/cd-rom-stations HL-DT-ST DVD-ROM GDR8164B
> > Disksstations DELL Array SCSI Disk Device 446.9GB
> > VideoCards RADEON 7000 Series 16MB
> > Diskettestations (Standard floppy disk drives) Floppy disk drive
> > IDE ATA/ATAPI-controllers Intel(R) 82801EB Ultra ATA Storage Controllers
> > Primary IDE Channel
> > Intel(R) 82801EB Ultra ATA Storage Controllers
> > Primary IDE Channel
> > Secondary IDE Channel
> > Keyboard USB Human Interface Device
> > Mouse USB Human Interface Device
> > Monitor Default Monitor - (Standard monitor types)
> > USB-controllers Intel(R) 82801EB USB Universal Host Controller - 24D2
> > Intel(R) 82801EB USB Universal Host Controller - 24D4
> > Intel(R) 82801EB USB Universal Host Controller - 24D7
> > Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD
> > Adapters Intel(R) PRO/1000 MT Network Connection
> >
> > Processor:
> > Intel(R) Xeon(TM) CPU 2.80GHz
> > Klokseed 2.8GHz
> > L2-cachesize 2048
> >
> >
> > --
> >
> >
> > Regards
> >
> > Erik W

>
>
>

 
Reply With Quote
 
Erik W
Guest
Posts: n/a

 
      05-22-2006, 09:52 AM
I solved the problem. Thw WMI SNMP provider was interfering. I removed this
component, because we don't use it. Now everything looks OK


--


Regards

Erik W


"Erik W" wrote:

> yes I did the uninstall and than reinstall it from CD, that was the first
> thing I tried. But no luck.
> --
>
>
> Regards
>
> Erik W
>
>
> "Louis Vitiello Jr." wrote:
>
> > Hey Erik,
> >
> > Have you tried uninstalling it through Add/Remove Components then
> > re-installing it off the CD?
> >
> > Hope this helps,
> > --
> > Louis Vitiello Jr.
> > ------------------------------
> > MCSE, MCSA, MCP, A+/N+
> > ERCP XP Pro / Net Concepts
> >
> >
> > "Erik W" <(E-Mail Removed)> wrote in message
> > news:A38FD060-E2A8-4548-AFE4-(E-Mail Removed)...
> > >I keep getting the following error in the eventlog of a Windows 2003
> > >Standard
> > > Server when I try to start theSNMP service:
> > >
> > > Faulting application snmp.exe, version 5.2.3790.1830, faulting module
> > > kernel32.dll, version 5.2.3790.1830, fault address 0x00015dea.
> > >
> > > I tried to remove and reinstall the service, nothing, I tried to reinstall
> > > SP1 no changes, what is causing this problem?
> > >
> > > the server is:
> > > A Dell PowerEdge 1800
> > > BIOS-versie A05
> > > BIOS-datum 09-21-05
> > > Windows-versie Microsoft(R) Windows(R) Server 2003, Standard Edition
> > >
> > > Hardware:
> > > Dvd/cd-rom-stations HL-DT-ST DVD-ROM GDR8164B
> > > Disksstations DELL Array SCSI Disk Device 446.9GB
> > > VideoCards RADEON 7000 Series 16MB
> > > Diskettestations (Standard floppy disk drives) Floppy disk drive
> > > IDE ATA/ATAPI-controllers Intel(R) 82801EB Ultra ATA Storage Controllers
> > > Primary IDE Channel
> > > Intel(R) 82801EB Ultra ATA Storage Controllers
> > > Primary IDE Channel
> > > Secondary IDE Channel
> > > Keyboard USB Human Interface Device
> > > Mouse USB Human Interface Device
> > > Monitor Default Monitor - (Standard monitor types)
> > > USB-controllers Intel(R) 82801EB USB Universal Host Controller - 24D2
> > > Intel(R) 82801EB USB Universal Host Controller - 24D4
> > > Intel(R) 82801EB USB Universal Host Controller - 24D7
> > > Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD
> > > Adapters Intel(R) PRO/1000 MT Network Connection
> > >
> > > Processor:
> > > Intel(R) Xeon(TM) CPU 2.80GHz
> > > Klokseed 2.8GHz
> > > L2-cachesize 2048
> > >
> > >
> > > --
> > >
> > >
> > > Regards
> > >
> > > Erik W

> >
> >
> >

 
Reply With Quote
 
Louis Vitiello Jr.
Guest
Posts: n/a

 
      05-26-2006, 12:45 PM
Thanks for the follow up!


--
Louis Vitiello Jr.
------------------------------
MCSE, MCSA, MCP, A+/N+
ERCP XP Pro / Net Concepts

"Erik W" <(E-Mail Removed)> wrote in message
news:269C98B8-F373-44CB-8991-(E-Mail Removed)...
>I solved the problem. Thw WMI SNMP provider was interfering. I removed this
> component, because we don't use it. Now everything looks OK
>
>
> --
>
>
> Regards
>
> Erik W
>
>
> "Erik W" wrote:
>
>> yes I did the uninstall and than reinstall it from CD, that was the first
>> thing I tried. But no luck.
>> --
>>
>>
>> Regards
>>
>> Erik W
>>
>>
>> "Louis Vitiello Jr." wrote:
>>
>> > Hey Erik,
>> >
>> > Have you tried uninstalling it through Add/Remove Components then
>> > re-installing it off the CD?
>> >
>> > Hope this helps,
>> > --
>> > Louis Vitiello Jr.
>> > ------------------------------
>> > MCSE, MCSA, MCP, A+/N+
>> > ERCP XP Pro / Net Concepts
>> >
>> >
>> > "Erik W" <(E-Mail Removed)> wrote in message
>> > news:A38FD060-E2A8-4548-AFE4-(E-Mail Removed)...
>> > >I keep getting the following error in the eventlog of a Windows 2003
>> > >Standard
>> > > Server when I try to start theSNMP service:
>> > >
>> > > Faulting application snmp.exe, version 5.2.3790.1830, faulting module
>> > > kernel32.dll, version 5.2.3790.1830, fault address 0x00015dea.
>> > >
>> > > I tried to remove and reinstall the service, nothing, I tried to
>> > > reinstall
>> > > SP1 no changes, what is causing this problem?
>> > >
>> > > the server is:
>> > > A Dell PowerEdge 1800
>> > > BIOS-versie A05
>> > > BIOS-datum 09-21-05
>> > > Windows-versie Microsoft(R) Windows(R) Server 2003, Standard Edition
>> > >
>> > > Hardware:
>> > > Dvd/cd-rom-stations HL-DT-ST DVD-ROM GDR8164B
>> > > Disksstations DELL Array SCSI Disk Device 446.9GB
>> > > VideoCards RADEON 7000 Series 16MB
>> > > Diskettestations (Standard floppy disk drives) Floppy disk drive
>> > > IDE ATA/ATAPI-controllers Intel(R) 82801EB Ultra ATA Storage
>> > > Controllers
>> > > Primary IDE Channel
>> > > Intel(R) 82801EB Ultra ATA Storage Controllers
>> > > Primary IDE Channel
>> > > Secondary IDE Channel
>> > > Keyboard USB Human Interface Device
>> > > Mouse USB Human Interface Device
>> > > Monitor Default Monitor - (Standard monitor types)
>> > > USB-controllers Intel(R) 82801EB USB Universal Host Controller - 24D2
>> > > Intel(R) 82801EB USB Universal Host Controller - 24D4
>> > > Intel(R) 82801EB USB Universal Host Controller - 24D7
>> > > Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD
>> > > Adapters Intel(R) PRO/1000 MT Network Connection
>> > >
>> > > Processor:
>> > > Intel(R) Xeon(TM) CPU 2.80GHz
>> > > Klokseed 2.8GHz
>> > > L2-cachesize 2048
>> > >
>> > >
>> > > --
>> > >
>> > >
>> > > Regards
>> > >
>> > > Erik W
>> >
>> >
>> >



 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
RRAS Wont Start Dean Newman Windows Networking 2 03-21-2007 11:56 PM
IIS default install giving authentication error Blaine76 Windows Networking 1 01-23-2007 03:42 AM
wireless zero config service wont start automatically Val Wireless Networks 0 02-06-2006 08:26 PM
RPC Server and UserEnv error - Can't start SERVER service Kinsley Windows Networking 0 09-11-2005 04:36 PM
Network wizard giving error DB Home Networking 0 09-14-2003 06:14 PM



1 2 3 4 5 6 7 8 9 10 11