SNMP Fails on Windows 2003 Server (std) DC

Hi,

we have a number of Windows 2003 DCs mostly HP ML350G4s and DL360G4s.
All are recently setup with SP1 and all have SNMP installed and configured.
On one (and only one) of these servers, an ML350G4, SNMP will not run
for more than a second and logs :

Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date: 05/12/2005
Time: 11:18:59
User: N/A
Computer: SCL-NW
Description:
Faulting application snmp.exe, version 5.2.3790.1830, faulting module
kernel32.dll, version 5.2.3790.1830, fault address 0x00015dea.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 73 6e 6d ure snm
0018: 70 2e 65 78 65 20 35 2e p.exe 5.
0020: 32 2e 33 37 39 30 2e 31 2.3790.1
0028: 38 33 30 20 69 6e 20 6b 830 in k
0030: 65 72 6e 65 6c 33 32 2e ernel32.
0038: 64 6c 6c 20 35 2e 32 2e dll 5.2.
0040: 33 37 39 30 2e 31 38 33 3790.183
0048: 30 20 61 74 20 6f 66 66 0 at off
0050: 73 65 74 20 30 30 30 31 set 0001
0058: 35 64 65 61 5dea

in the Application Log.

I have reinstalled SP1, deinstalled and reinstalled SNMP, deinstalled
and reinstalled SNMP and reapplied SP1. I have dragged and dropped files
from a working server. I have updated the HP Insite agents to 7.4.0
(from 7.3.0) and redone the above at least once. I have made sacrifices
of blood at both the full and new moons and I am at my wits' end.

Please can anyone offer a solution to this before my sanity goes completely?

Steve Burton.

If it makes you feel any better, I have the same problem with one of
my servers after installing SP1. I have 7 servers total and it only
occured on one. The only way I could get SNMP to start and stay
started was by uninstalling it with Add/Remove Windows Components and
then reinstalling with the Windows CD. That way the old version is
installed. I'm sure this is not recommended but it's the only way I
could get it to work until I did find a solution. I still get some
errors on occasion but it stays started.
I was not able to find any other solutions. Maybe someone here will
get us one.



On Mon, 05 Dec 2005 14:07:43 +0000, S Burton
<(E-Mail Removed)> wrote:

>Hi,
>
>we have a number of Windows 2003 DCs mostly HP ML350G4s and DL360G4s.
>All are recently setup with SP1 and all have SNMP installed and configured.
>On one (and only one) of these servers, an ML350G4, SNMP will not run
>for more than a second and logs :
>
>Event Type: Error
>Event Source: Application Error
>Event Category: (100)
>Event ID: 1000
>Date: 05/12/2005
>Time: 11:18:59
>User: N/A
>Computer: SCL-NW
>Description:
>Faulting application snmp.exe, version 5.2.3790.1830, faulting module
>kernel32.dll, version 5.2.3790.1830, fault address 0x00015dea.
>
>For more information, see Help and Support Center at
>http://go.microsoft.com/fwlink/events.asp.
>Data:
>0000: 41 70 70 6c 69 63 61 74 Applicat
>0008: 69 6f 6e 20 46 61 69 6c ion Fail
>0010: 75 72 65 20 20 73 6e 6d ure snm
>0018: 70 2e 65 78 65 20 35 2e p.exe 5.
>0020: 32 2e 33 37 39 30 2e 31 2.3790.1
>0028: 38 33 30 20 69 6e 20 6b 830 in k
>0030: 65 72 6e 65 6c 33 32 2e ernel32.
>0038: 64 6c 6c 20 35 2e 32 2e dll 5.2.
>0040: 33 37 39 30 2e 31 38 33 3790.183
>0048: 30 20 61 74 20 6f 66 66 0 at off
>0050: 73 65 74 20 30 30 30 31 set 0001
>0058: 35 64 65 61 5dea
>
>in the Application Log.
>
>I have reinstalled SP1, deinstalled and reinstalled SNMP, deinstalled
>and reinstalled SNMP and reapplied SP1. I have dragged and dropped files
>from a working server. I have updated the HP Insite agents to 7.4.0
>(from 7.3.0) and redone the above at least once. I have made sacrifices
>of blood at both the full and new moons and I am at my wits' end.
>
>Please can anyone offer a solution to this before my sanity goes completely?
>
>Steve Burton.