SMTP service not send mail

Hi,

I try use "Persistent Port Forwarding" for using SMTP
service in W2YK, but all email save in "Queue" folder not
send!.

Please, one sample for SMTP Port Forwarding.

Thank

PTTK

I use PPPoE in Internet connection type and my MN-700 is
conected back to Arescom NetDSL 1000.

Thank

PTTK
>-----Original Message-----
>Hi,
>
>I try use "Persistent Port Forwarding" for using SMTP
>service in W2YK, but all email save in "Queue" folder not
>send!.
>
>Please, one sample for SMTP Port Forwarding.
>
>Thank
>
>PTTK
>.
>

Are you trying to connect to the WAN IP address from behind the MN-700?

pttk wrote:

> I use PPPoE in Internet connection type and my MN-700 is
> conected back to Arescom NetDSL 1000.
>
> Thank
>
> PTTK
>
>>-----Original Message-----
>>Hi,
>>
>>I try use "Persistent Port Forwarding" for using SMTP
>>service in W2YK, but all email save in "Queue" folder not
>>send!.
>>
>>Please, one sample for SMTP Port Forwarding.
>>
>>Thank
>>
>>PTTK
>>.
>>

Sorry, but how?

my conections is PC(W2Yk)<->MN-700<->Arescom 1000<->DSL
(ISP)

Dynamic IP connected with PPPoE (in MN-700)

Thank

PTTK


>-----Original Message-----
>Are you trying to connect to the WAN IP address from
behind the MN-700?
>
>pttk wrote:
>
>> I use PPPoE in Internet connection type and my MN-700
is
>> conected back to Arescom NetDSL 1000.
>>
>> Thank
>>
>> PTTK
>>
>>>-----Original Message-----
>>>Hi,
>>>
>>>I try use "Persistent Port Forwarding" for using SMTP
>>>service in W2YK, but all email save in "Queue" folder
not
>>>send!.
>>>
>>>Please, one sample for SMTP Port Forwarding.
>>>
>>>Thank
>>>
>>>PTTK
>>>.
>>>
>
>.
>

If your computer is configured to send SMTP to the WAN IP on the MN-700
it will not go to the server because the MN-700 doesn't support loop back.

pttk wrote:
> Sorry, but how?
>
> my conections is PC(W2Yk)<->MN-700<->Arescom 1000<->DSL
> (ISP)
>
> Dynamic IP connected with PPPoE (in MN-700)
>
> Thank
>
> PTTK
>
>
>
>>-----Original Message-----
>>Are you trying to connect to the WAN IP address from
>
> behind the MN-700?
>
>>pttk wrote:
>>
>>
>>>I use PPPoE in Internet connection type and my MN-700
>
> is
>
>>>conected back to Arescom NetDSL 1000.
>>>
>>>Thank
>>>
>>>PTTK
>>>
>>>
>>>>-----Original Message-----
>>>>Hi,
>>>>
>>>>I try use "Persistent Port Forwarding" for using SMTP
>>>>service in W2YK, but all email save in "Queue" folder
>
> not
>
>>>>send!.
>>>>
>>>>Please, one sample for SMTP Port Forwarding.
>>>>
>>>>Thank
>>>>
>>>>PTTK
>>>>.
>>>>
>>
>>.
>>

Or are you saying you are trying to send an e-mail using your ISP?

joker wrote:

> If your computer is configured to send SMTP to the WAN IP on the MN-700
> it will not go to the server because the MN-700 doesn't support loop back.
>
> pttk wrote:
>
>> Sorry, but how?
>>
>> my conections is PC(W2Yk)<->MN-700<->Arescom 1000<->DSL (ISP)
>>
>> Dynamic IP connected with PPPoE (in MN-700)
>>
>> Thank
>>
>> PTTK
>>
>>
>>
>>> -----Original Message-----
>>> Are you trying to connect to the WAN IP address from
>>
>>
>> behind the MN-700?
>>
>>> pttk wrote:
>>>
>>>
>>>> I use PPPoE in Internet connection type and my MN-700
>>
>>
>> is
>>
>>>> conected back to Arescom NetDSL 1000.
>>>>
>>>> Thank
>>>>
>>>> PTTK
>>>>
>>>>
>>>>> -----Original Message-----
>>>>> Hi,
>>>>>
>>>>> I try use "Persistent Port Forwarding" for using SMTP service in
>>>>> W2YK, but all email save in "Queue" folder
>>
>>
>> not
>>
>>>>> send!.
>>>>>
>>>>> Please, one sample for SMTP Port Forwarding.
>>>>>
>>>>> Thank
>>>>>
>>>>> PTTK
>>>>> .
>>>>>
>>>
>>> .
>>>
>

Yes I send email with external SMTP service without
problem, but I like use my SMTP service.

Thank again

PTTK
>-----Original Message-----
>Or are you saying you are trying to send an e-mail using
your ISP?
>
>joker wrote:
>
>> If your computer is configured to send SMTP to the WAN
IP on the MN-700
>> it will not go to the server because the MN-700 doesn't
support loop back.
>>
>> pttk wrote:
>>
>>> Sorry, but how?
>>>
>>> my conections is PC(W2Yk)<->MN-700<->Arescom 1000<-
>DSL (ISP)
>>>
>>> Dynamic IP connected with PPPoE (in MN-700)
>>>
>>> Thank
>>>
>>> PTTK
>>>
>>>
>>>
>>>> -----Original Message-----
>>>> Are you trying to connect to the WAN IP address from
>>>
>>>
>>> behind the MN-700?
>>>
>>>> pttk wrote:
>>>>
>>>>
>>>>> I use PPPoE in Internet connection type and my MN-
700
>>>
>>>
>>> is
>>>
>>>>> conected back to Arescom NetDSL 1000.
>>>>>
>>>>> Thank
>>>>>
>>>>> PTTK
>>>>>
>>>>>
>>>>>> -----Original Message-----
>>>>>> Hi,
>>>>>>
>>>>>> I try use "Persistent Port Forwarding" for using
SMTP service in
>>>>>> W2YK, but all email save in "Queue" folder
>>>
>>>
>>> not
>>>
>>>>>> send!.
>>>>>>
>>>>>> Please, one sample for SMTP Port Forwarding.
>>>>>>
>>>>>> Thank
>>>>>>
>>>>>> PTTK
>>>>>> .
>>>>>>
>>>>
>>>> .
>>>>
>>
>
>.
>

so the SMTP server is behind the MN-700 as well as the computer trying
to connect to it then? If that is not the case please give details on
where the SMTP server is located, the MN-700, & computer trying to send
the e-mail. This of course is in reference to each other.

pttk wrote:

> Yes I send email with external SMTP service without
> problem, but I like use my SMTP service.
>
> Thank again
>
> PTTK
>
>>-----Original Message-----
>>Or are you saying you are trying to send an e-mail using
>
> your ISP?
>
>>joker wrote:
>>
>>
>>>If your computer is configured to send SMTP to the WAN
>
> IP on the MN-700
>
>>>it will not go to the server because the MN-700 doesn't
>
> support loop back.
>
>>>pttk wrote:
>>>
>>>
>>>>Sorry, but how?
>>>>
>>>>my conections is PC(W2Yk)<->MN-700<->Arescom 1000<-
>>
>>DSL (ISP)
>>
>>>>Dynamic IP connected with PPPoE (in MN-700)
>>>>
>>>>Thank
>>>>
>>>>PTTK
>>>>
>>>>
>>>>
>>>>
>>>>>-----Original Message-----
>>>>>Are you trying to connect to the WAN IP address from
>>>>
>>>>
>>>>behind the MN-700?
>>>>
>>>>
>>>>>pttk wrote:
>>>>>
>>>>>
>>>>>
>>>>>>I use PPPoE in Internet connection type and my MN-
>
> 700
>
>>>>
>>>>is
>>>>
>>>>
>>>>>>conected back to Arescom NetDSL 1000.
>>>>>>
>>>>>>Thank
>>>>>>
>>>>>>PTTK
>>>>>>
>>>>>>
>>>>>>
>>>>>>>-----Original Message-----
>>>>>>>Hi,
>>>>>>>
>>>>>>>I try use "Persistent Port Forwarding" for using
>
> SMTP service in
>
>>>>>>>W2YK, but all email save in "Queue" folder
>>>>
>>>>
>>>>not
>>>>
>>>>
>>>>>>>send!.
>>>>>>>
>>>>>>>Please, one sample for SMTP Port Forwarding.
>>>>>>>
>>>>>>>Thank
>>>>>>>
>>>>>>>PTTK
>>>>>>>.
>>>>>>>
>>>>>
>>>>>.
>>>>>
>>>
>>.
>>

Thank

My SMTP server is conected to MN-700 (RJ-45) and use
local IP the my PC, and I try send email in my PC with
outlook express, now use ISP SMTP service without problem.

PC(W2Yk)<->MN-700<->Arescom 1000<-DSL (ISP)

The router DSL Arescom is conected to ISP

Thank again

PTTK

>-----Original Message-----
>so the SMTP server is behind the MN-700 as well as the
computer trying
>to connect to it then? If that is not the case please
give details on
>where the SMTP server is located, the MN-700, & computer
trying to send
>the e-mail. This of course is in reference to each other.
>
>pttk wrote:
>
>> Yes I send email with external SMTP service without
>> problem, but I like use my SMTP service.
>>
>> Thank again
>>
>> PTTK
>>
>>>-----Original Message-----
>>>Or are you saying you are trying to send an e-mail
using
>>
>> your ISP?
>>
>>>joker wrote:
>>>
>>>
>>>>If your computer is configured to send SMTP to the WAN
>>
>> IP on the MN-700
>>
>>>>it will not go to the server because the MN-700
doesn't
>>
>> support loop back.
>>
>>>>pttk wrote:
>>>>
>>>>
>>>>>Sorry, but how?
>>>>>
>>>>>my conections is PC(W2Yk)<->MN-700<->Arescom 1000<-
>>>
>>>DSL (ISP)
>>>
>>>>>Dynamic IP connected with PPPoE (in MN-700)
>>>>>
>>>>>Thank
>>>>>
>>>>>PTTK
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>-----Original Message-----
>>>>>>Are you trying to connect to the WAN IP address from
>>>>>
>>>>>
>>>>>behind the MN-700?
>>>>>
>>>>>
>>>>>>pttk wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>I use PPPoE in Internet connection type and my MN-
>>
>> 700
>>
>>>>>
>>>>>is
>>>>>
>>>>>
>>>>>>>conected back to Arescom NetDSL 1000.
>>>>>>>
>>>>>>>Thank
>>>>>>>
>>>>>>>PTTK
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>-----Original Message-----
>>>>>>>>Hi,
>>>>>>>>
>>>>>>>>I try use "Persistent Port Forwarding" for using
>>
>> SMTP service in
>>
>>>>>>>>W2YK, but all email save in "Queue" folder
>>>>>
>>>>>
>>>>>not
>>>>>
>>>>>
>>>>>>>>send!.
>>>>>>>>
>>>>>>>>Please, one sample for SMTP Port Forwarding.
>>>>>>>>
>>>>>>>>Thank
>>>>>>>>
>>>>>>>>PTTK
>>>>>>>>.
>>>>>>>>
>>>>>>
>>>>>>.
>>>>>>
>>>>
>>>.
>>>
>
>.
>

To connect to the SMTP server from behind the firewall you don't need
any port forwarding. Just connect to the local IP address. This is
because the MN-700 doesn't have loopback support yet.

pttk wrote:

> Thank
>
> My SMTP server is conected to MN-700 (RJ-45) and use
> local IP the my PC, and I try send email in my PC with
> outlook express, now use ISP SMTP service without problem.
>
> PC(W2Yk)<->MN-700<->Arescom 1000<-DSL (ISP)
>
> The router DSL Arescom is conected to ISP
>
> Thank again
>
> PTTK
>
>
>>-----Original Message-----
>>so the SMTP server is behind the MN-700 as well as the
>
> computer trying
>
>>to connect to it then? If that is not the case please
>
> give details on
>
>>where the SMTP server is located, the MN-700, & computer
>
> trying to send
>
>>the e-mail. This of course is in reference to each other.
>>
>>pttk wrote:
>>
>>
>>>Yes I send email with external SMTP service without
>>>problem, but I like use my SMTP service.
>>>
>>>Thank again
>>>
>>>PTTK
>>>
>>>
>>>>-----Original Message-----
>>>>Or are you saying you are trying to send an e-mail
>
> using
>
>>>your ISP?
>>>
>>>
>>>>joker wrote:
>>>>
>>>>
>>>>
>>>>>If your computer is configured to send SMTP to the WAN
>>>
>>>IP on the MN-700
>>>
>>>
>>>>>it will not go to the server because the MN-700
>
> doesn't
>
>>>support loop back.
>>>
>>>
>>>>>pttk wrote:
>>>>>
>>>>>
>>>>>
>>>>>>Sorry, but how?
>>>>>>
>>>>>>my conections is PC(W2Yk)<->MN-700<->Arescom 1000<-
>>>>
>>>>DSL (ISP)
>>>>
>>>>
>>>>>>Dynamic IP connected with PPPoE (in MN-700)
>>>>>>
>>>>>>Thank
>>>>>>
>>>>>>PTTK
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>-----Original Message-----
>>>>>>>Are you trying to connect to the WAN IP address from
>>>>>>
>>>>>>
>>>>>>behind the MN-700?
>>>>>>
>>>>>>
>>>>>>
>>>>>>>pttk wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>I use PPPoE in Internet connection type and my MN-
>>>
>>>700
>>>
>>>
>>>>>>is
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>conected back to Arescom NetDSL 1000.
>>>>>>>>
>>>>>>>>Thank
>>>>>>>>
>>>>>>>>PTTK
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>-----Original Message-----
>>>>>>>>>Hi,
>>>>>>>>>
>>>>>>>>>I try use "Persistent Port Forwarding" for using
>>>
>>>SMTP service in
>>>
>>>
>>>>>>>>>W2YK, but all email save in "Queue" folder
>>>>>>
>>>>>>
>>>>>>not
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>>send!.
>>>>>>>>>
>>>>>>>>>Please, one sample for SMTP Port Forwarding.
>>>>>>>>>
>>>>>>>>>Thank
>>>>>>>>>
>>>>>>>>>PTTK
>>>>>>>>>.
>>>>>>>>>
>>>>>>>
>>>>>>>.
>>>>>>>
>>>>>
>>>>.
>>>>
>>
>>.
>>