SMC Wireless router to Wireless router

Hello,

We have a setup in the house with a SMC wireless router connected to
another SMC wireless router. Both routers are SMC Barricade. It was
working fine and then one of the router got reset.

Now the router that acted as the client can't access the wirless
router with the internet connection.

Is there anything about the settings that I am missing? I tried to use
WDS to bridge the 2 routers but must be missing something.

The guy who set this up is no longer around.

Thanks.

The source Router has to be configured normally, as infrastructure Wireless.
Resetting the second Router put it back to the default infrastructure mode.
Configure the second Router as Client or WDS, or what Mode it use to be.
Jack (MVP-Networking).

<(E-Mail Removed)> wrote in message
news:(E-Mail Removed) ups.com...
> Hello,
>
> We have a setup in the house with a SMC wireless router connected to
> another SMC wireless router. Both routers are SMC Barricade. It was
> working fine and then one of the router got reset.
>
> Now the router that acted as the client can't access the wirless
> router with the internet connection.
>
> Is there anything about the settings that I am missing? I tried to use
> WDS to bridge the 2 routers but must be missing something.
>
> The guy who set this up is no longer around.
>
> Thanks.
>