SMC 7004abr loses ME102

Hi all,
My LAN will work fine for weeks on end, then suddenly the AP vanishes.
I.e, wireless doesn't work (although signal is 100%) and AP manager cannot
find it.
If I reset the router (via web interface or reset button) everything is fine
again for maybe the rest of the session or only an hour or so.
After a week or so of resets it all may work fine again for weeks.
Any help much appreciated.

Fred Flintstone <(E-Mail Removed)> wrote:
> Hi all,
> My LAN will work fine for weeks on end, then suddenly the AP vanishes.
> I.e, wireless doesn't work (although signal is 100%) and AP manager cannot
> find it.
> If I reset the router (via web interface or reset button) everything is fine
> again for maybe the rest of the session or only an hour or so.
> After a week or so of resets it all may work fine again for weeks.
> Any help much appreciated.

Is this with Windows XP?
My SMC7004WFW has been working fine for months. Then I upgraded my laptop
to WinXP from Win2000. The Orinoco Silver is configured for QoS by
default, and I wonder if that causes trouble for the SMC router.

A couple of weeks ago, I had my daughter's computer here, running WinXP
with a DLink DWl-122 mini-USB. I uninstalled the recent WindowsUpdate for
the DLink and reinstalled the DLink-supplied drivers in order to eliminate
the problem with the DLink. With WinXP and the DLink, the Dlink would stop
working, and my Orinoco-win2000 would stop working. I had to reset the
router to get going again. The wired connections still worked. The signal
strength was "excellent".

My setup works fine against other APs, and I can't decide if it's
WinXP-QoS, or if it's a coincidence, and my two year old SMC is tired.
This morning, I disabled the QoS service in the service panel, Set the
reserved portion to 0 in the group policies, and uninstalled the QoS from
my Orinoco network properties. The Earthlink page suggests reducing the
bandwidth to zero, says nothing about the service panel, and says to enable
the NIC (which I didn't do).
<http://support.earthlink.net/mu/1/psc/img/walkthroughs/windows_XP/6800.psc.html>
Further.net suggests just removing it from the NIC:
<http://forums.furthurnet.org/viewtopic.php?p=995&sid=69055b9e626a90c2c3db542470 49f12e>


--
---
Clarence A Dold - Hidden Valley (Lake County) CA USA 38.8-122.5

<(E-Mail Removed)> wrote in message
news:cnas40$9sm$(E-Mail Removed)...
> Is this with Windows XP?
> My SMC7004WFW has been working fine for months. Then I upgraded my laptop
> to WinXP from Win2000. The Orinoco Silver is configured for QoS by
> default, and I wonder if that causes trouble for the SMC router.
>
> A couple of weeks ago, I had my daughter's computer here, running WinXP
> with a DLink DWl-122 mini-USB. I uninstalled the recent WindowsUpdate for
> the DLink and reinstalled the DLink-supplied drivers in order to eliminate
> the problem with the DLink. With WinXP and the DLink, the Dlink would
stop
> working, and my Orinoco-win2000 would stop working. I had to reset the
> router to get going again. The wired connections still worked. The
signal
> strength was "excellent".
>
> My setup works fine against other APs, and I can't decide if it's
> WinXP-QoS, or if it's a coincidence, and my two year old SMC is tired.
> This morning, I disabled the QoS service in the service panel, Set the
> reserved portion to 0 in the group policies, and uninstalled the QoS from
> my Orinoco network properties. The Earthlink page suggests reducing the
> bandwidth to zero, says nothing about the service panel, and says to
enable
> the NIC (which I didn't do).
>
<http://support.earthlink.net/mu/1/ps...ws_XP/6800.psc.
html>
> Further.net suggests just removing it from the NIC:
>
<http://forums.furthurnet.org/viewtop...626a90c2c3db54
247049f12e>

I have 2 laptops running XP but I still had the problem when one was
running 98.
Yep, wired connections are always fine.
Very annoying, cheers for your input.