Skipped

Ok I have a huge problem and I hope this doesn't mean my router got
bricked.
Following the instructions at
http://thescorpion420.dyndns.org/por...nt/view/27/36/,
I skipped the first two steps referring to using
vxworks_killer_g_v06.zip and the VXWorks Killer image tool to create an
image of my WRT54G MAC adress. I screwed up the first step and was
unable to get "Management Mode Firmware Upgrade Screen".

So I just used tftp.exe to Upload an image of
dd-wrt.v23_micro_generic.bin. Now I log into http://192.168.1.1 and see
the DD-WRT Control Panel but it won't read my LAN/WAN IP. If I go to
status it just says:

Login TypeAutomatic Configuration - DHCP
Login Status
IP Address0.0.0.0
Subnet Mask0.0.0.0
Gateway0.0.0.0
DNS 1 DNS 2 DNS 3
Remaining Lease Time0 days 00:00:00

Also since I didn't do the MAC ADDRESS imaging thing, the MAC Address
of my router is the DD-WRT default: 00:40:10:10:00:02 . Is there anyway
to fully start over and go back to the original Linksys control panel
or atleast to fix the DD-WRT configurations?

I would appreciate any help at all. Thank you in advance!