OK you actually answered my question. I did need a router between and it
will not talk on the same lan. That's what I thought, I just wasn't sure I
was correct. Thank you very much.
"Miha Pihler [MVP]" wrote:
> Hi,
>
> It looks to me from your description that your two computers are in
> different subnet while being on same LAN. You have two options...
> - set up router between them
> - put 135.11.20.x computer into 135.11.12.x network until you move it to
> another location...
>
> Personally I would go with option two.
>
> --
> Mike
> Microsoft MVP - Windows Security
>
> "1xnyer" <(E-Mail Removed)> wrote in message
> news:F7148A75-5438-42B7-A9BE-(E-Mail Removed)...
> > Sites aren't physically up yet. Servers are still in house (on the 12
> > nework
> > configured with the 20 address). If I run a tracert to the 20 side it
> > looks
> > to go out over the internet, if I tracert the 12 it resolves in house.
> > Perhaps I will not be able to see any of this until it's physically set
> > up?
> >
> > "Miha Pihler [MVP]" wrote:
> >
> >> Hi,
> >>
> >> Sorry, few more questions about this. Are these two sites already up and
> >> running?
> >>
> >> What happens if you run:
> >>
> >> tracert 135.11.12.x
> >>
> >> from server 135.11.20.x
> >>
> >> where x is IP address of one and the other server... What happens if you
> >> it
> >> in oposite direction?
> >>
> >> --
> >> Mike
> >> Microsoft MVP - Windows Security
> >>
> >> "1xnyer" <(E-Mail Removed)> wrote in message
> >> news:F6AC3C5B-AEF7-41D0-AB13-(E-Mail Removed)...
> >> > on the 12 side they are 135.11.12.x and on the 20 side they are
> >> > 135.11.20.x
> >> > both with a 255.255.252.0 subnet.
> >> >
> >> > "Miha Pihler [MVP]" wrote:
> >> >
> >> >> What are current IP addresses of the servers?
> >> >>
> >> >>
> >> >> --
> >> >> Mike
> >> >> Microsoft MVP - Windows Security
> >> >>
> >> >>
> >> >>
> >> >> "1xnyer" <(E-Mail Removed)> wrote in message
> >> >> news:A88A4AAF-080E-49CD-95C0-(E-Mail Removed)...
> >> >> > I'm planning an off site location in a few weeks. I have ip address
> >> >> > my
> >> >> > address in house is 135.11.12.x with a 22 bit subnet mask. My
> >> >> > alternate
> >> >> > site
> >> >> > will be 135.11.20.x with a 22 bit subnet mask. My problem is I have
> >> >> > the
> >> >> > servers set up here in house and they can not talk to each other.
> >> >> >
> >> >> > I have Active Directory Sites and services set up with the site link
> >> >> > and a
> >> >> > subnet for the 135.11.20.x. Can anyone shed some light as to why
> >> >> > they
> >> >> > can't
> >> >> > talk?
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>
|
Similar Threads
Linear Mode
