Networking Forums

Networking Forums > Network Hardware > Home Networking > Simultaneous Ethernet & WiFi connections - Help.....!

Reply
Thread Tools Display Modes

Simultaneous Ethernet & WiFi connections - Help.....!

 
 
Steve Walker
Guest
Posts: n/a

 
      12-17-2003, 07:21 PM
Hi -

I have a standard 10/100 cabled Ethernet arrangment, for a small Windows
peer network (providing file, printer & internet sharing). This
includes a 'docking lead' for my laptop, so that it can plug in on the
desk to update large data files (approx 1-2 gb)

I recently stuck a generic 802.11b Access Point onto the network, so
that the laptop could roam without having to swap from socket to socket.
It works fine for that, but obviously it's a lot slower than switched
Ethernet.

The problem is that even when I connect the ThinkPad with it's normal
Cat5 lead, the WiFi still connects as well. So I have two network
connections (and two IP addresses) on the laptop, and any data transfer
seems to use one or both of them randomly. Tonight it's favouring the
802.11b, and my normal 10 min file transfer is going to take a hour or
two.

I could physically unplug the AP before booting the laptop, or manually
disable WiFi on the laptop each time I want to do a big transfer, but
surely there's some way that the OS (XP Pro) can recognise & prioritise
between two available connections?

Fingers crossed for any advice people can offer - Thanks for reading
this far !





 
Reply With Quote
 
 
 
 
MoJo JoJo
Guest
Posts: n/a

 
      12-17-2003, 10:33 PM
disable the wi-fi on the laptop when plugged into via the cable

I suspect this is the routing table within Windows that is the reason you are
going via wi-fi somedays and ethernet others.


On Wed, 17 Dec 2003 20:21:34 -0000, "Steve Walker" <spam-(E-Mail Removed)> wrote:

>Hi -
>
>I have a standard 10/100 cabled Ethernet arrangment, for a small Windows
>peer network (providing file, printer & internet sharing). This
>includes a 'docking lead' for my laptop, so that it can plug in on the
>desk to update large data files (approx 1-2 gb)
>
>I recently stuck a generic 802.11b Access Point onto the network, so
>that the laptop could roam without having to swap from socket to socket.
>It works fine for that, but obviously it's a lot slower than switched
>Ethernet.
>
>The problem is that even when I connect the ThinkPad with it's normal
>Cat5 lead, the WiFi still connects as well. So I have two network
>connections (and two IP addresses) on the laptop, and any data transfer
>seems to use one or both of them randomly. Tonight it's favouring the
>802.11b, and my normal 10 min file transfer is going to take a hour or
>two.
>
>I could physically unplug the AP before booting the laptop, or manually
>disable WiFi on the laptop each time I want to do a big transfer, but
>surely there's some way that the OS (XP Pro) can recognise & prioritise
>between two available connections?
>
>Fingers crossed for any advice people can offer - Thanks for reading
>this far !
>
>
>
>


 
Reply With Quote
 
Jay
Guest
Posts: n/a

 
      12-18-2003, 07:59 AM
Investigate hardware profiles through windows help.

You tell the laptop at boot you are "wired" or "wireless" (or whatever
names you chose for your profiles) and allow only that adaptor to be
enabled in that profile.

afaik there isn't a utility which detects presence of wired and
disables wireless for you.

jay

 
Reply With Quote
 
Steve Walker
Guest
Posts: n/a

 
      12-18-2003, 05:46 PM
Jay wrote:
> Investigate hardware profiles through windows help.
>
> You tell the laptop at boot you are "wired" or "wireless" (or whatever
> names you chose for your profiles) and allow only that adaptor to be
> enabled in that profile.
>
> afaik there isn't a utility which detects presence of wired and
> disables wireless for you.


Thanks Jay ( & MoJo) -

Pretty depressing that physical intervention is required to force a
changeover which is obvious, but I guess if that's my biggest problem I
can't complain.... )


 
Reply With Quote
 
Geoff Lane
Guest
Posts: n/a

 
      12-19-2003, 05:15 AM
On Wed, 17 Dec 2003 20:21:34 -0000, "Steve Walker"
<spam-(E-Mail Removed)> wrote:

>Hi -
>
>I have a standard 10/100 cabled Ethernet arrangment,
>
>I recently stuck a generic 802.11b Access Point onto the network,


>The problem is that even when I connect the ThinkPad with it's normal
>Cat5 lead, the WiFi still connects as well.


Not sure if this would be suitable for you but what about setting up a
Hardware Profile. If you've got both either both will connect or you
will have to disable one or the other.

I would have thought that it should take the easier route if given an
option but obviously not.

Geoff Lane

 
Reply With Quote
 
Jay
Guest
Posts: n/a

 
      12-19-2003, 08:20 AM
On Thu, 18 Dec 2003 18:46:31 -0000, "Steve Walker"
<spam-(E-Mail Removed)> wrote:

>Pretty depressing that physical intervention is required to force a
>changeover which is obvious, but I guess if that's my biggest problem I
>can't complain.... )


)

Know what you mean. Over time this will no doubt be addressed. In
the grand scheme of things, mainstream wireless is still pretty new.

Have fun

jay

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
simultaneous LAN and WAN connections in windows XP A. Qadah Wireless Networks 3 11-26-2007 03:53 PM
Only 4 simultaneous socket connections? Gerrit Niezen Linux Networking 1 02-01-2007 03:33 AM
maximum simultaneous network connections Mr. Boy Linux Networking 17 04-18-2005 04:31 PM
Simultaneous Infrastructure and Ad Hoc connections? Tim Haynes Wireless Internet 2 03-07-2005 05:17 PM
Max simultaneous TCP connections in Win98? Mr. Wood Broadband 11 07-17-2004 01:56 PM



1 2 3 4 5 6 7 8 9 10 11