how to setup wireless routing using dlink 614+?

Hello,

I have two WAPs, and just one is connected to the Internet. I want the
other WAP to work as a repeater. Note that I can't connect both by
cable.

Question: How to setup roaming with this configuration?

Thank you very much,

Peye

Okay here is what I did.....I have the 614+ connected to my cable
modem, you can use any modem, then I have 1 AP connected to it. I
then, in a remote location, have another AP connected to a hub. I put
the AP's in "bridge" mode and then both connect and all the computers
connected to the hub have internet access.
DO NOT plug the AP into port 1 on the 614+ OR the hub!

On 24 Nov 2003 04:54:08 -0800, (E-Mail Removed) (Peye) wrote:

>Hello,
>
>I have two WAPs, and just one is connected to the Internet. I want the
>other WAP to work as a repeater. Note that I can't connect both by
>cable.
>
>Question: How to setup roaming with this configuration?
>
>Thank you very much,
>
>Peye

What is the model of the "other" WAP? A 614+ will not repeat.

"Peye" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) om...
> Hello,
>
> I have two WAPs, and just one is connected to the Internet. I want the
> other WAP to work as a repeater. Note that I can't connect both by
> cable.
>
> Question: How to setup roaming with this configuration?
>
> Thank you very much,
>
> Peye