Server not showing up in domain

Hello,

I'm building a new server in a completely new domain (windows 2003). When
I go to a workstation or on the server of the old domain, and view entire
network, I can see the new domain but no server underneath. On the new
server in the new domain, I don't see the other domain at all. I can attach
to the C$ of each of the servers from the other server by using the ip
address.

I am able to import the DNS records into the others' DNS server.

Any suggestions on where I should begin?

Thanks!

Sorry - I should have mentioned - they are all on the same call C subnet.
All on the same physical switch.
"Michael Giorgio - MS MVP" <(E-Mail Removed)> wrote in
message news:uPExP$(E-Mail Removed)...
> If the new server is on a different subnet than your local
> LAN you'll need to setup a NBNS (netbios name server)
> e.g., WINS.
>
> "boe" <(E-Mail Removed)> wrote in message news:
>> Hello,
>>
>> I'm building a new server in a completely new domain (windows 2003).
> When
>> I go to a workstation or on the server of the old domain, and view
> entire
>> network, I can see the new domain but no server underneath. On the
> new
>> server in the new domain, I don't see the other domain at all. I can
> attach
>> to the C$ of each of the servers from the other server by using the ip
>> address.
>>
>> I am able to import the DNS records into the others' DNS server.
>>
>> Any suggestions on where I should begin?
>>
>> Thanks!
>>
>>
>
>

If the new server is on a different subnet than your local
LAN you'll need to setup a NBNS (netbios name server)
e.g., WINS.

"boe" <(E-Mail Removed)> wrote in message news:
> Hello,
>
> I'm building a new server in a completely new domain (windows 2003).
When
> I go to a workstation or on the server of the old domain, and view
entire
> network, I can see the new domain but no server underneath. On the
new
> server in the new domain, I don't see the other domain at all. I can
attach
> to the C$ of each of the servers from the other server by using the ip
> address.
>
> I am able to import the DNS records into the others' DNS server.
>
> Any suggestions on where I should begin?
>
> Thanks!
>
>

Okay then make sure Netbios over tcp/ip is enabled on
the problem server.

"boe" <(E-Mail Removed)> wrote in message news:
> Sorry - I should have mentioned - they are all on the same call C
subnet.
> All on the same physical switch.
>

Thanks for your help.
I ran DCDIAGS and found out I had an issue so I started over - works fine.

"Michael Giorgio - MS MVP" <(E-Mail Removed)> wrote in
message news:(E-Mail Removed)...
> Okay then make sure Netbios over tcp/ip is enabled on
> the problem server.
>
> "boe" <(E-Mail Removed)> wrote in message news:
>> Sorry - I should have mentioned - they are all on the same call C
> subnet.
>> All on the same physical switch.
>>
>
>