Sending SNMP alerts from Win 2003?

Hello,

I have a 3ware card that I would like to generate customer SNMP traffic for.
I have a DOS client that can harvest alerts from the card but I am not sure
how to send the alerts out. What utilities or scripts can I use to generate
outbound SNMP traffic for my particular events? I already have a SNMP
target server that will collect the traffic.

Can I send SNMP traffic from a WMI script or Resource Kit tool? Guidance
would be appreciated.

Has anyone used UCD-SNMP on Windows?

Anything that you can recommend to get me going in the right direction would
be appreciated.

TIA.

The following information should answer your qquestions:

324263 HOW TO: Configure the Simple Network Management Protocol (SNMP) Service
http://kb/article.asp?id=Q324263

189131 How To Programmatically Trigger a SNMP Trap
http://kb/article.asp?id=Q189131

According to the FAQ on this link http://www.ece.ucdavis.edu/ucd-snmp/FAQ.html UCD-SNMP
does not run on Windows.

There is a net-snmp for windows you may want to check out:
http://www.net-snmp.org/

HTH,
Gary

--------------------
'--'Reply-To: "Tim Net" <(E-Mail Removed)>
'--'From: "Tim Net" <(E-Mail Removed)>
'--'Subject: Sending SNMP alerts from Win 2003?
'--'Date: Mon, 17 Jan 2005 15:36:40 -0500
'--'Lines: 19
'--'X-Priority: 3
'--'X-MSMail-Priority: Normal
'--'X-Newsreader: Microsoft Outlook Express 6.00.2900.2527
'--'X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2527
'--'X-RFC2646: Format=Flowed; Original
'--'Message-ID: <eJ$xERN$(E-Mail Removed)>
'--'Newsgroups: microsoft.public.windows.server.networking
'--'NNTP-Posting-Host: nat-66-223-56.interland.net 66.223.56.153
'--'Path: cpmsftngxa10.phx.gbl!TK2MSFTNGXA01.phx.gbl!TK2MSFT NGP08.phx.gbl!
TK2MSFTNGP11.phx.gbl
'--'Xref: cpmsftngxa10.phx.gbl microsoft.public.windows.server.networking:21757
'--'X-Tomcat-NG: microsoft.public.windows.server.networking
'--'
'--'Hello,
'--'
'--'I have a 3ware card that I would like to generate customer SNMP traffic for.
'--'I have a DOS client that can harvest alerts from the card but I am not sure
'--'how to send the alerts out. What utilities or scripts can I use to generate
'--'outbound SNMP traffic for my particular events? I already have a SNMP
'--'target server that will collect the traffic.
'--'
'--'Can I send SNMP traffic from a WMI script or Resource Kit tool? Guidance
'--'would be appreciated.
'--'
'--'Has anyone used UCD-SNMP on Windows?
'--'
'--'Anything that you can recommend to get me going in the right direction would
'--'be appreciated.
'--'
'--'TIA.
'--'
'--'
'--'


This posting is provided "AS IS" with no warranties, and confers no rights. Use of included
script samples are subject to the terms specified at http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to this message are best
directed to the newsgroup/thread from which they originated.